MARDIN Electric Pruning Shears User Manual

: May 15, 2024
: Mardin

Table of Contents

Thank You
Package contents
Safety instructions
Battery use and maintenance
Technical specifications
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARDIN Electric Pruning Shears

MARDIN Electric Pruning Shears

Thank You

Dear user, thank you for choosing one of Mardin’s quality products! To use the electric pruning shears safely we advise you to read the instructions carefully. Store the manual good in case you have any questions about the pruning shears later on. If you have any questions during use, please do not hesitate to contact us.

Package contents

Electric Secateurs
2x battery
Battery charger
Tools
User manual

Safety instructions

Warning! Read all instructions carefully. Failure to follow all of the instructions below can lead to problems!

Safety instructions for commissioning

Keep the workplace clean and well lit, chaotic and dark workplaces can cause accidents.
Do not use the electric pruning shears in an explosive, flammable or damp environment.
Make sure there are no people around to create distractions.

Charging safety instructions

The battery connection of the electric pruning shears must match the battery connection plug of the charger. Do not modify the charger and the plug in any way!
Do not expose the electric pruning shears to rain or damp environment. Water or other liquids entering it will increase the risk of electric shock and cause electrical damage.

Personal Safety Instructions

Stay alert, pay attention to the operation you are doing and stay alert when operating the electric pruning shears. Do not use the electric pruning shears in case of fatigue, medicinal treatment or if you have drunk alcohol. This can cause serious personal injury or injury to others.
Before switching on the electric pruning shears, remove any tool keys that may be on the electric pruning shears. The tool keys left on the rotating parts of the electric pruning shears can cause personal injury.
Only use the electric pruning shears to trim branches that are within reach. Make sure you have a stable posture to avoid tipping over. Keep your hands away from the cutting area and never put your hands under the material that is being cut. At the same time, make sure that any material or surface below the cutting area is not damaged by the pruning blade.
Dress appropriately, do not wear loose clothing or accessories, keep your hair, clothing and sleeves away from moving parts. Loose clothing, accessories or long hair can get caught in the moving parts and cause damage/injury.

Abnormal situation and treatment method

When you accidentally place an object between the cutters, immediately release the trigger and the moving blade will automatically return to the open state.
When the branches are too thick/hard, release the trigger in time. Then the moving blade will automatically return to the open state.
Do not just charge the battery with any charger. Make sure that the battery charger is the one that comes with the product.
If an electrical or mechanical fault occurs, switch off the electric pruning shears immediately and remove the battery!
If the battery is not used in accordance with the operating instructions, the battery may leak liquid, do not touch this liquid. In case of contact, wash immediately with water. If the liquid splashes into the eyes, in addition to washing with water, you should also go to the hospital. Liquid escaping from the battery can cause irritation or burns.

Using the electric pruning shears

Install the battery in the electric pruning shears, press the on/off switch. When you hear a beep, it means the pruning shears are on and can be used normally.
Quickly pull the trigger 3-4 times. This opens up the blades of the shears after which it can be used. (This feature is designed to ensure personal safety and prevent accidents if the trigger is accidentally touched when the pruning shears are not in use).
Before pruning, pull the trigger a few times to raise and lower the blade. Listen and see if there are any strange noises or distortions. If everything is normal you can start working. If you hear strange noises or see distortion, please check the blade tension as explained on page 16.
If you want to change the size of the blade opening, you can do this by pressing the trigger. When you hear a beep, release the trigger immediately. The size of the blade opening is now fixed automatically.
To switch off the electric pruning shears, hold the trigger for a longer period of time. Wait until you hear 3 beeps. Release the trigger and the blades will close.
After closing the blades, press the on/off switch and the shears will turn off.

Charging the battery

The battery of your electric pruning shears is not fully charged before its first use. The battery must first be fully charged. Insert the charging plug into the battery and then into the outlet socket. When the battery is charging, the charging indicator turns red. When the battery is fully charged, the charging indicator turns green. After the charging is complete the battery is ready to be used.

Charging the battery

Notes:

When using the pruning shears for a long time, it is normal for the handle to become warmer.
If you have not used the shears for a long time, it is recommended to oil the blades. When you replace the blades, it is also recommended to lubricate lubricating oil between the blades. This extends the lifespan of the blade.
Do not cut branches that exceed the working range of the shears. Do not cut nonorganic materials or hard materials such as metal, stones, etc. If the scissors are worn or damaged, replace the blades.
Keep the equipment clean. Use a clean cloth or soft brush to clean the electric pruning shears after use.
Do not immerse the electric pruning shears, battery charger in liquid such as water.
Use the equipment correctly in accordance with the instructions. Do not use the electric pruning shears battery or charger if they are damaged.
If the trigger cannot be operated normally, do not use the electric scissors. The electric pruning shears that cannot be operated with the trigger are dangerous and must be repaired.
Make sure the battery of the electric pruning shears is removed when making adjustments, cleaning or storing the electric pruning shears. This protective measure reduces the risk of accidents.
Keep the electric pruning shears out of the reach of children. Do not allow people unfamiliar with electric pruning shears to work with these pruning shears.
When using electric pruning shears and accessories, follow the instructions and methods of use and take into account the working environment and the work to be performed. Using electric pruning shears for operations that do not meet the requirements can lead to a incidents.
After use, remove the battery from the electric pruning shears, then clean any residue from the movable blade and the fixed blade. Then apply lubricating oil or motor oil to the contact area to keep the blade in a normal service condition. The next use will reduce the resistance and extend the life of the blade.

Battery use and maintenance

Do not charge the battery in an environment below 0C° and above 45C°, as this may damage the battery and charger.
Make sure the switch is in the off position before connecting the battery.
Use only the charger specified by the manufacturer to charge the battery. Using a charger that does not match the battery to charge the battery may cause fire and other hazards.
When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws and other small metal objects that could short-circuit the battery. Shorting the battery may cause burns or fire.
It is forbidden to disassemble and reassemble the battery.
It is forbidden to use the battery next to heat sources.
It is forbidden to throw the battery into fire or water
It is forbidden to charge the battery near fire or under sunlight.
It is forbidden to walk over, throw or hit the battery with a hammer.
Damaged or deformed batteries must not be used.
It is forbidden to solder directly to the battery.

Maintenance of the electric pruning shears

Adjust scissors

Before using the electric pruning shears, check the clearance on the blade. If there is play on the blade, this must be remedied by adjusting the blades.

Loosen the screw counter clockwise with a screwdriver as shown in Figure 1, and remove the screw as shown in Figure 2.
Use a socket wrench to adjust the locknut until it reaches the correct tightness, not too tight, as shown in Figure 3
Retighten the screw as shown in Figure 4 and check the blade’s closing.

Note: When the pruning shears are closed, the blades should not swing sideways. If the blades swing sideways it creates a gap between the two blades, preventing the gear teeth from meshing correctly and damaging the mechanical structure.

Sharpening the blade

Switch off the electric pruning shears when the blade is open and remove the battery!
Sharpen the blades of the shears with a sharpening stone on the cutting edge.
Clean the blade after sharpening.

Replace blade

Switch off the electric pruning shears when the blade is open and remove the battery!

Use a screwdriver to loosen the two screws on the housing and remove the housing, shown in Figure 1.
Use tools to loosen the screw and anti-loosen washer as shown in Figure 2.
Use a socket wrench to loosen the locknut and remove the stop ring as shown in Figure 3.
Remove the old movable blade and replace it with a new one, shown in **figure 4.

**

Use a little lube oil to grease the new blade and gears.
If necessary, clean and grease the gears (warning: do not use chemical lubricant) as shown in Figure 6.
Place the blade and gear on the scissors as shown in Figure 7.
Install the stop ring and tighten the locknut as shown in Figure 8.
Tighten the locking screw and anti-loosen washer, close the housing and tighten the screws as shown in **Figure 9

Note: The fixed and movable blades can be replaced separately.
**

Technical specifications

This product is an electric pruning shear, and is composed of a fixed blade and a movable blade, lithium battery, charger, tool box and tools. The charging voltage of the batteries is AC 110V-240V.

Electric Pruning Shears Basic Information

Customer Support

Questions?
If you have any questions during use, please contact us at this email address: Klantenservice@f-group.nl. We are always here for you to answer your questions and problems.

Logo