BESST BUY MQ210 2 in 1 Magnetic Charging Travel Kit User Guide
- May 15, 2024
- BESST BUY
Table of Contents
- BESST BUY MQ210 2 in 1 Magnetic Charging Travel Kit
- Product Information
- Product Usage Instructions
- Package contents
- Features
- Overview
- Setting up your kit
- Charging your devices
- Storing your travel charging kit
- Legal notices
- Specifications
- One-year limited warranty
- Contact Best Buy essentials
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BESST BUY MQ210 2 in 1 Magnetic Charging Travel Kit
Product Information
Specifications
- Model: BE-MQ210W24
- Product Type: 2-in-1 Magnetic Charging Travel Kit
- Input Port: USB-C port
- Output Port: USB output port
- LED Indicator: Charging LED (Off: Not charging, Light: Charging, Flashing: Foreign object detected or error)
- Warranty: One-year limited warranty
Features
- Magnetic wireless charging pad
- Apple Watch charger holder
- Compact and travel-friendly design
- USB-C to USB-C cable included
- USB male to USB-C female adapter included
Product Usage Instructions
Setting up Your Kit
- Open the kit and thread your Apple Watch charger through the opening behind the charger holder into the cable slot.
- Push your Apple Watch charger into the charger holder with the magnetic side facing away from the cable slot.
- Wind the cable through the groove around the outside of the kit.
- Plug your Apple Watch charger’s USB connector into the USB port. Use the USB male to USB-C female adapter if necessary.
Charging Your Devices
- Plug the kit into a power source using the included USB-C to USB-C cable. The charging LED will light up for 3 seconds.
- Place your devices on the charging pads. Avoid putting metal on the pads.
Storing Your Travel Charging Kit
- Remove all devices from the kit and unplug it from the power source.
- Close the kit and secure it using the clasp and clasp tab.
Legal Notices
FCC compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
certain conditions as outlined in the manual.
Contact Information
For customer service, call
1-877-467-4289 (U.S. and Canada) or
visit
www.bestbuy.com/bestbuyessentials.
FAQ
Q: What should I do if the charging LED is flashing?
A: If the charging LED is flashing, it indicates a foreign object detected or
an error. Remove any foreign objects and ensure proper placement of your
devices on the charging pads.
Before using your new product, please read these instructions to prevent any damage.
- Flat size (W×H): 19.89 x 2.95 in. (505 x 75 mm.)
- Final folded size: 3.31 × 2.95 in. (84 × 75 mm.)
Package contents
- 2-in-1 Magnetic charging travel kit
- 3.3 ft. (1 m) USB-C to USB-C cable
- USB male to USB-C female adapter
- Quick Setup Guide
Features
- Supports magnetic wireless charging with iPhone 14, iPhone 13, and iPhone 12 SERIES, AirPods, AirPods Pro and more
- Charges your iPhones with up to 7.5W or other Qi-enabled devices with up to 10W
- Folds for easy portability when travelling
- Backed by Best Buy
Overview
Top view
Bottom view
Setting up your kit
- Open the kit, then thread your Apple Watch charger (not included) through the opening behind the charger holder and into the cable slot.
- Push your Apple Watch charger into the charger holder, with the magnetic side facing away from the cable slot.
- Wind the cable through the groove around the outside of your kit.
- Plug your Apple Watch charger’s USB connector into the USB port. Use the USB male to USB-C female adapter if necessary.
Charging your devices
- Open your kit, then plug it into a power source (not included) using the included USB-C to USB-C cable. The charging LED lights for 3 seconds.
- Place your devices (not included) on the charging pads.
Storing your travel charging kit
- Remove all devices from your kit and unplug it from its power source.
- Close your kit and secure it using the clasp and clasp tab.
WARNING:
- People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker.
- Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted.
- Ensure that there are no metal parts on the back of your device. Metal heats up significantly in the field of an induction charger and can damage your device and/or the charger.
Legal notices
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o_ and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
RSS-Gen statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RSS-102 Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment.
- CAN ICES-3 (B)/NMB-3(B)
Specifications
- Dimensions (H × W × D) including clasp: 3 × 8.5 × .6 in. (80 × 215.5 × 16.2 mm)
- Weight: 4.5 oz. (125 g)
- Input: DC 5V/3A, 9V/2.22A (PD 20W or above)
- Output (wireless charging): 5W / 7.5W / 10W
- Output (USB port): 5W (5V/1A)
- Cable length: 3.3 ft. (1 m)
One-year limited warranty
Visit www.bestbuy.com/bestbuyessentials for details.
Contact Best Buy essentials
For customer service, call 1-877-467-4289 (U.S. and Canada).
www.bestbuy.com/bestbuyessentials
Best Buy Essentials is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
- 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
- ©2023 Best Buy. All rights reserved.