Pace TECHNOLOGY 2BBDD-TRUPIN Golf Pin Distance Locator User Guide

May 15, 2024
Pace TECHNOLOGY

Pace TECHNOLOGY 2BBDD-TRUPIN Golf Pin Distance Locator

Product Specifications

  • Operating System: Real-time embedded OS
  • Processor: Application Processor
  • Memory: Not specified
  • LTE Cellular Modem: Telit ME310G1-WW modem
  • GPS: Locosys MC-1010-V2b module
  • Wi-Fi / Bluetooth: Espressif ESP32 S2 WROOM module
  • Battery: 1500mAh@3.7V Lithium Polymer (LiPo) cells
  • Vibration: Included for feedback
  • Display: LCD with SPI interface
  • Charging: 2W Wired USB-C
  • Sound: Piezoelectric buzzer
  • Connectors: USB-C 2.0

FAQ

  • Q: How do I charge the device?
  • A: Connect the provided USB-C cable to the device and a power source to initiate charging.
  • Q: Can I expand the memory of the device?
  • A: The memory of the device is not expandable as per the current specifications.
  • Q: What should I do if the device does not power on?
  • A: Make sure the battery is charged and try holding down the power button for a longer duration to power on the device.

Revision history

Rev. Date Author Changes
1.0 2023/07/13 Initial Release

Overview

  • This document describes the hardware specifications for a device dedicated to golf course operations.

Block Diagram

Pace-TECHNOLOGY-2BBDD-TRUPIN-Golf-Pin-Distance-Locator-
FIG-1

Features Summary

Features Description
OS Real-time embedded OS
Processor ESP32-S2 embedded, Xtensa® single-core 32-bit LX7 microprocessor,

up to 240 MHz: Detailed Specification sheet.
Memory| 128 KB ROM + 320 KB SRAM + 16 KB SRAM in RTC + 4 MB Flash Internal
LTE Cellular Modem| Telit SMT CELL MODEM – CAT-M1 ME310G1-WW

LTE UE Cat M1, 3G and 2G global fallback frequency support – 15x18mm Requires SIM holder

GPS| Locosys MC-1010-V2b
Wi-Fi / Bluetooth| Espressif ESP32 S2 WROOM module ( datasheet )



Antennas

| GNSS: Taoglas One Stage GPS-GLONASS-GALILEO-BeiDou Embedded Active Patch Antenna Module with Front-End SAW Filter AGVB.25A.07.0060A; patch antenna (uFL connected);

Wi-Fi – PCB antennas on the main board; LTE – Internal ceramic antenna SR4L034-L

Battery| 1S configuration; Lithium Polymer chemistry. – default configuration 1500mAh

cell. MIKROE-4473

Vibration| DC Motor VC1030B028F
Sound| Piezo Buzzer CMT-1032-85-SMT-TR
LED| Low current Red/Green APBD3224LSURKZGKC
LCD| 102×64 pixels (EA DOGS102W-6) with white backlight (EA LED39X41-W)

System Details

Operating System
The board runs a customized version of an embedded OS featuring multi-tasking libraries, device drivers, and other components required to operate the hardware platform.

Application Processor
ESP32-S2 embedded, Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz

LTE Modem
Telit ME310G1-WW modem with internal antenna (Antenova SR4L034-L) and SIM holder.

Wi-Fi/Bluetooth
Espressif ESP32 S2 WROOM module

GNSS / GPS
Integrated receiver Locosys MC-1010-V2b module with Taoglas AGVB.25A.07.0060A internal patch antenna.

Battery
The base configuration contains 1500mAh@3.7V Lithium Polymer (LiPo) cells.

Vibration
The device contains vibration for feedback.

Display
LCD use SPI interface

Charging
2W Wired USB-C

Sound
The device features a piezoelectric buzzer.

Connectors

  • USB-C 2.0

Environmental Conditions

  • Operating Temps
    • -4°F to 140°F
  • Storage Temps
    • 23°F to 113°F
  • Test IP67
    • Water
  • 30 minutes submerged no deeper than 40 inches
    • Dust

CONTACT

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals