IKEA AA-2416878-1-100 JETSTRÖM LED Wall Light Panel Instructions

IKEA AA-2416878-1-100 JETSTRÖM LED Wall Light Panel

Product Specifications:

• Manufacturer: IKEA of Sweden AB
• Maximum Pairing Distance: 5 cm
• Number of Colors with Remote Control: 9
• Number of Colors with IKEA Smart Hub: 20

Product Usage Instructions

Getting Started:

1. Connect your product to the mains or plug the power cable into the wall socket.
2. Ensure the light source is installed and the main power switch is turned on.
3. Pair the light source with a steering device:
4. Hold the steering device close to the light source (not more than 5 cm away).
5. Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the steering device. The light source will dim and flash once to indicate successful pairing.

Note: Up to 10 light sources can be paired with 1 steering device. Pair them one at a time and disconnect already paired sources if they are close.
Control Options: The remote control allows switching between 9 colours and white lights. Using the IKEA smart hub and app expands the colour options to 20.

Care Instructions:
Wipe clean with a damp cloth. Avoid abrasive cleaners or chemical solvents to prevent damage to the product.

Factory Reset:
If the product is unresponsive or needs unpairing, perform a factory reset by inserting a paper clip end into the small RESET hole and applying slight pressure.

Frequently Asked Questions (FAQ):

• Q: Can this product be used with standard dimmers?
  A: No, this product is only controllable by IKEA Smart lighting products and should not be used with standard dimmers.

• Q: How many light sources can be paired with one steering device?
  A: Up to 10 light sources can be paired with one steering device.

• Q: How do I dispose of this product responsibly?
  A: The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. Please recycle it in accordance with local environmental regulations.

Getting started

Connect your product to the mains or plug the power cable into the wall socket.
Before you can use your light source you’ll need to pair it with a steering device.

1. Make sure that your light source is installed and the main power switch is turned on.
2. Hold the steering device close to the light source you want to add (no more than 5 cm away).
3. Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the steering device. Your light source will begin to dim and finally flash one time to indicate that it has been successfully paired.

Up to 10 light sources can be paired with 1 steering device. Make sure to pair them one at a time. If the light sources are close to each other, disconnect those that have already been paired from the main power switch.
With the remote control you can switch between 9 colours and white lights. With the IKEA smart hub and the IKEA Home smart app, you get a total of 20 colours and white lights.

If you have the TRÅDFRI gateway or DIRIGERA hub
Go to App Store or Google Play and download the IKEA Home smart app. The app will take you through the process of installing your product and other devices.

CAUTION:
DO NOT USE WITH STANDARD DIMMERS. This light source will not operate properly when connected to a standard (incandescent) dimmer or dimming control. Only controllable by IKEA Smart lighting products.

How to factory reset your product

If the product does not respond or if you want to un-pair the product from a steering device you might have to make a factory reset. The product is forced to factory reset by carefully inserting a paper clip end or similar in the small hole (marked RESET) and apply a slight pressure.

IMPORTANT!

1. The product is for indoor use only and can be used in temperatures ranging from 5 °C to 40 °C.
2. Do not leave the product in direct sunlight or near any heat source, as it may overheat.
3. The declared radio range between the unit and the steering device is measured in open air.
4. Different building materials and placement of the units can affect the wireless connectivity range.

Care Instructions

1. Wipe clean with a damp cloth. Never use abrasive cleaners or chemical solvents as this can damage the product.
2. Save these instructions for future use.

Technical data

• Type: L2205, L2206 JETSTRÖM
• Input: 220-240 VAC, 9.5W
• Max lumen output: 1150 lm
• Radio range: 10 m in open air.
• Operating frequency: 2405-2480 MHz
• Output power (EIRP): Max 8.5 dBm
• Manufacturer: IKEA of Sweden AB
• Address: Box 702, SE-343 81 Älmhult, SWEDEN

DISPOSAL

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling by local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

© Inter IKEA Systems B.V. 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>