Meloya GH0730 Digital Wall Clock Instruction Manual

GH0730 Digital Wall Clock

“`html

Specifications:

• Model: GH0730 Remote Control
• Display: LED
• Power Source: Electric plug-in
• Color Options: White, Red, Green, Blue, Seven-color automatic
  change, RGB rainbow seven-color change, RGB transform left to
  right, RGB transform top to bottom

Product Usage Instructions:

1. Time Setting:

To set the time on the clock:

1. 1. Press and hold the =SET button to initiate the setup.

2. Use the . or buttons to choose between 12-hour or 24-hour clock
   format.

2. Display Setting:

To customize the display settings:

1. 1. Press the corresponding button to access different display  

   options such as date, temperature, and display modes.

3. Alarm Setting:

To set alarms:

1. 1. Toggle alarm on/off by pressing the button.

2. Use the . or buttons to set the alarm time.

FAQs:

Q: How long does each alarm last?

A: Every alarm will last for 1 minute. You can open snooze by
short pressing a button or turn off the alarm by pressing any
button, or it will automatically turn off after 1 minute of
ringing.

Q: What is the battery used for in the clock?

A: The battery is only used to memorize the time settings when
power off.

“`

GH0730 Remote Control Manual

=”SET”button

Note:The clock needs to be plugged in to display
1.Time Setting

Press and hold to initiate the setup of 12-hour/24-hourclock.Press . or to choose.

Press to initiate “HOUR”setup. Press . or to choose.

Press to initiate “MINUTE”setup. Press . or to choose.

Press to initiate “YEAR”setup. Press . or to choose.

Press to initiate “MONTH”setup. Press . or to choose.
2.Display Setting

Press to initiate “DATE”setup. Press . or to choose.

Press to initiate “TEMPERATURE”setup. Press . or to change Fahrenheit to Celsius and vice versa.

Press to choose DP-1 as the display mode.

Press to choose DP-2 as the display mode.

Under DP-1 mode, the screen will display time only.

Under DP-2, the screen will cycle display time, date and temperature.

Press to go back to time screen.

Under DP-2, the display will be:10-second display of time, then 3-second display of date,then 3-second display of temperature.

3.Alarm Setting

Alarm 1 off

Press the button to access the alarm 1 switch display Press cycle to turn on/off the alarm 1

Press the button to display the alarm 1 time
Alarm 1 on

When displaying Alarm 1/2/3,press and hold the . button to enter the setup of the alarm.Press . or to set hour.
4.Count-down Setting

Press the button to initiate minute setup. Press or to choose.

press the button to go back to time screen

And press the button to access the next alarm.The alarm 2,alarm3 are the same operation as alarm 1,finally press the button to go back to time screen.
Note: Every alarm will last for 1 minute.When alarming, short press button to open snooze. Press any button to turn off the alarm.Or automatically turn off the alarm after 1 minute of ringing.

Press and hold to initiate count down setup.
5.Count-up Setting

Press to choose minute,press to choose second. Press to start or stop the countdown.

Long press the button to start zeroing. (Can only be cleared after a pause)

Press and hold to go back to time screen.

Press and hold . to initiate count-up setup.

Press button to start the count-up.

Press button again to pause or continue.

Long press button to
start zeroing.cCan only be cleared after a pause

Long press button to return to the time display mode.
6.Colour Setting
Short press the button to switch the screen colour, in order: white – red – green – blue – overall seven-colour automatic change – RGB rainbow seven- colour change-rgb transform left to right -rgb transform top to bottom In the RGB dynamic color mode, short press the button to select the current color, press the UP button again to continue the color mode setting change.

Alarm Clock Button Manual

Note:The clock needs to be plugged in to display
1.Time Setting

Press and hold

to

initiate the setup of

12-hour/24-hourclock.Press

. or to choose.

Press to initiate “HOUR”setup. Press . or to choose.

cThe battery is only used to memorize the time settings when power off

Press to initiate “MINUTE”setup. Press . or to choose.

Press to initiate “YEAR”setup. Press . or to choose.

Press

to initiate

“MONTH”setup. Press

. or to choose.

2.Display Setting

Press to initiate “DATE”setup. Press . or to choose.

Press

to initiate

“TEMPERATURE”setup. Press

. or to change Fahrenheit

to Celsius and vice versa.

Press

to choose DP-1

as the display mode.

Press

to choose DP-2

as the display mode.

Under DP-1 mode, the screen will display time only.

Under DP-2, the screen will cycle display time, date and temperature.

Press to go back to time screen.

Under DP-2, the display will be:10-second display of time, then 3-second display of date,then 3-second display of temperature.

3.Alarm Setting

Alarm 1 off

Press the

button to

access the alarm 1 switch

display Press cycle to turn

on/off the alarm 1

Press the

button to

display the alarm 1 time

Alarm 1 on

When displaying Alarm 1/2/3,press and hold the . button to enter the setup of the alarm.Press . or to set hour.
4.Count-down Setting

Press the button to initiate minute setup. Press or to choose.

Press

to go

back to time

screen.

And press

the button to

access the next alarm.The alarm

2,alarm3 are the same operation

as alarm 1,finally press the

button to go back to time screen.

Note: Every alarm will last for 1 minute.When alarming, short press any button to snooze. Long press any button to turn off the alarm.Or automatically turn off the alarm after 1 minute of ringing.

Press and hold to initiate count down setup.
5.Count-up Setting

Press to choose minute,press to choose second. Press to start or stop the countdown.

Long press the button to start zeroing. (Can only be cleared after a pause)

Press and hold to go back to time screen.

Press and hold UP to initiate count-up setup.

Long press

button to return to

the time display mode.

Press button to start the count-up.

Press

button

again to pause or

continue.

Long press the
button to start zeroing. cCan only be cleared after a pause

6.Colour Setting

Short press the button to switch the screen colour, in order: white – red – green – blue – overall seven-colour automatic change – RGB rainbow seven- colour change-rgb transform left to right -rgb transform top to bottom
In the RGB dynamic color mode, short press the button to select the current color, press the UP button again to continue the color mode setting change.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>