Meloya DS-6635 Remote LED Digital Wall Clock User Guide

Meloya DS-6635 Remote LED Digital Wall Clock

Main Functions

1. Time, day, date, temperature, seven-color second-hand display
2. Brightness mode adjustable:
3. Ten-speed automatic light sensitivity,
4. Ten-speed manual brightness adjustment,
5. The display can be turned off
6. Memory mode: power off memory
7. Alarm function: two groups of alarms with single/double break/daily alarm
8. Time counting and countdown functions: up to 99 minutes and 59 seconds
9. Three important holiday tips: New Year’s Day, Valentine’s Day, Christmas

Comprehensive Settings

1. General Settings:
2. Display Mode Settings: Press the key to switch the display mode
3. Display time only
4. Display time, date, and temperature only, skip display .
5. Brightness Mode Settings: short press to swilh manual/automatic brightness adjustment, in automatic mode display in manual mode display the last brightness . Press to adjust, piess to exist.

Alarm Settings

1. Switch alarm: tap to display respectiwly represent 1/2 groups of alan clocks. Press to turn on/off the related clock. means the first alarm clock, the colT8Sponding alarm clock icon lights up Press ” ” to set up the alarm clock.
2. Turn off alarm: when the alarm sounds, press any key to turn off the alarm and enter the next alarm state.

Timing Settings

• Timing up: short press dispaly press to start timing, press again to stop, such a cycle. Long press to clear exit and return to time status.
• Count down: short press dispaly press the “0-9” numeric keys to enter the countdown time (for minutes seconds example: enter “1058” in 10 minutes and 58 seconds), press to start counting down, press again to stop, such a cycle. Long press to clear exit and return to time status.

Other Settings

1. In setting mode: press to change the numbers, or enter the number keys, press to save and exist setting, if no opration for 3 seconds, save and exist automaticlly.
2. Buttons on the back of the alarm colock: short press of the four buttons has the same function as the remote control. Long press to swith manual/automatic brightness adjustment, long press key to switch the display mode.
3. : Tum on/off display, time goes on even if the display is turned off.
4. Daylight saving time: Long press “-” to turn on/off daylight saving time and display/off the “DST” icon.
5. The remote control “EN/CN” function is empty

Note: The clock must be plugged in to display. The battery is only used for memory functions. If the power cuts o, the system will enable the backup battery to keep normal timing, no need to reset the time.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>