Cudmor B0BQQHS9C8 2 In 1 Cordless Electric Air Duster and Vacuum Instructions

Cudmor B0BQQHS9C8 2 In 1 Cordless Electric Air Duster and Vacuum

Product Specifications

• RPM: 51000-100000
• Input: 5V/2A
• Indicator Lights: Red light when charging, Green light when fully charged or working

Product Usage Instructions

Charging

1. Connect the device to a 5V/2A USB outlet using the provided cable.
2. A red light will blink during charging.
3. Greenlight will stay on continuously when the device is fully charged.

Maintenance

1. Ensure the dust container is regularly emptied and cleaned to prevent blockages.
2. Turn off the device before cleaning.
3. Remove the dust cup and empty any accumulated debris.
4. Gently tap the filter to remove dust and wipe the dust cup with a dry cloth.

Note: The dust filter can be washed with clean water. Allow it to dry completely before reassembling the dust cup.

FAQ

• Q: What should I do if the device is not working?
• A: Check if the green light is on when the device is turned on. If not, ensure it is fully charged. If the issue persists, contact customer support.
• Q : Can I use any USB outlet to charge the device?
• A: It is recommended to use a USB outlet with an output of 5V/2A for optimal charging speed. Some outlets may not provide sufficient current, affecting charging performance.

OVERVIEW

Please read this instruction manual carefully before using the product, and keep it for future reference.
Dusting off/Blowing air: Select nozzle 1-6 components or brush nozzle according to the using scenario. Vacuum: Select the nozzle or use it with the nozzle brush head according to the using scenario

About the : component

• Tube nozzle 1: Clean up the dust in OA equipment or narrow spaces where tools can not reach out (used with Nozzle 2)
• Nozzle 2: For camera lens/jewelry/phone handset charging port and other items
• Nozzle 3 : For swimming ring/beach ball/yoga ball inflation; Air blowing on barbecue charcoal
• Nozzle 4: For PVC swimming pools and inflatable beds, etc.
• Nozzle 5: For blowing the dust off the computer host, keyboard, etc. Brush nozzle 6: Clean up static or thick dust adhesions
• Vac nozzle 1 : Vacuum the dust or debris
• Vac nozzle 2 : Use to vacuum dust, debris or hair
• Silicone component: Pump air for storage bag/compression bag (Used with nozzle 4)
• Vac brush : Use to vacuum static or thick dust adhesion(Used with Vac nozzle 1)

How to clean the Dust Cup?

1. Take off the dust cup and pull crumbs, and debris into the trash can.
2. Take out the vacuum filter inside the dust cup and clean more dust. PS: Please make sure the air duster stops working if you want to clean the duct more

Specifications

Operate Instruction

1. Hold down the power button for 3 seconds to turn on the duster and set the speed to first gear.
2. Press the power button again to change to second gear. Press the power button for the third time to switch to the third gear.
3. Press the power button the fourth time, and change to standby mode. If you do not do anything in standby mode for one minute, it will automatically turn off.
4. Long press the power button to turn it off when it is in turn-on status.
5. If you have any questions about our products, please contact us. This is our email address:AT626655386@outlook.com

How to Charge

1. Insert the USB cable into the charging port of the air dust, and connect it to a 5V/2A USB outlet, such as a USB charger, mobile phone adapter, laptop, mobile power supply, etc., in order to shorten the charging time, the 5 V/2 A adapter is the best choice.
2. When the device is charging, the indicator light flashes red, and the indicator light is always green when it is fully charged.

Note

1. It is not recommended to use the product while charging, because it will not hold a charge while working.
2. In case the air duster stops working in a short time, please keep the battery in a fully charged condition. The battery’s lifetime would be shortened if you keep it in a wet place.

Indicator Instruction:

1. Red light blink when charging
2. Greenlight long time when fully charged
3. Green light when working

Tips: To shorten the charging time, please connect the cable with a 5V/2A USB outlet, like a USB charger, cellphone adapter, etc., Some USB outlets might have insufficient output current, which will slow down the charging speed or even hinder the charging.

How to Use

Note

1. When using the Pressurized air for air nozzle for air inflation, the air valve must be opened for rapid air inflation. As shown below:
2. Release the nozzle from the nozzle hole and put it in the air outlet.

Special Note:

1. Before first use, please make sure to give the device full charging even if the battery itself is partially charged.
2. If you have not used this product for a long time, please unplug the adapter from the charging socket to save energy.
3. After long-term use or when it cannot be cleaned, we recommend you wash the filter or replace it.
4. Do not inhale water or other liquids, do not inhale flammable substances, and do not inhale uncooled ashes.
5. Do not place the machine in a humid or high-temperature place.
6. Do not block the air inlet when blowing dust.
7. Do not block the air outlet when vacuuming.
8. Please install a filter when using the vacuuming function.
9. Do not disassemble the battery, and prevent the product battery from fire, heat or direct sunlight.

Maintenance:

Make sure the dust container is emptied and cleaned regularly, and don’t let rubbish stay in the dust cup for long periods of time.

1. Turn off the device before cleaning the air duster, take off the dust cup and pull out the dust/debris.
2. Gently tap the filter to remove the dust attached to it.
3. Gently Wipe the dust cup with a dry cloth to clean it up.

Tips:
The dust filter can be washed with clean water. Reassemble the dust cup after drying.
Warning

1. If the machine is damaged, please do not use it.
2. To avoid danger or product damage during charging, please be sure to use the power cord provided by this product: use an adapter with an output power of 5V and a current 2-5A certified adapter (there will be slight heat at the handle during charging, it’s just normal).
3. In the hot summer, if you want to store this product in the car, please be sure to place it in the trunk to avoid high temperature and direct sunlight (Do not leave it in the car for a long time).

Troubleshoot:

1. Not working The battery may be low, please charge the battery.
2. You may not connect the machine to the adapter correctly Please connect the machine to the adapter with the power charging cable; the charging indicator light is on, indicating that the machine is charging.
3. The filter is blocked or the air outlet/air inlet is blocked during operation, causing the high temperature of the machine will trigger circuit protection, and it can return to normal after cleaning the filter or waiting for the temperature of the machine to drop.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>