Giantex ES10208 Electric Heated Throw User Manual

Giantex ES10208 Electric Heated Throw

Product Information

Specifications:

• Model Numbers : ES10208, ES10211, ES10212
• Type: Electric Heated Throw
• Usage : Indoor
• Power Source : Electric
• Material : TBD
• Color Options : Various

Product Usage Instructions

Operating Instructions

Ensure the heated throw is connected to a power source before use. Use the ON/OFF button to control the heating function. Adjust the timer and settings using the designated buttons. Increase or decrease the heat level as needed.

Washing Instructions

Do not iron the heated throw or dry clean it. Avoid using bleach. For hand washing, gently wash the heated blanket in cold water with mild laundry soap. Rinse thoroughly and squeeze out excess water. Do not iron. For line drying, drape the throw over clotheslines or a shower rod.

Drying Instructions

Tumble dry the heated throw on low heat. Ensure it has enough room to tumble freely. If using a commercial dryer, opt for the airdry or low setting to prevent damage to the heating element insulation.

FAQ

• Q: Can I iron the heated throw?
  • A : No, ironing the heated throw is not recommended as it may damage the product.
• Q: How should I store the heated throw when not in use?
  • A : When not in use, fold the heated throw neatly and store it in a cool, dry place away from direct sunlight.

IMPORTANT – INSTRUCTIONS – DO NOT DESTROY

IMPORTANT : Please read the enclosed USER MANUAL for ALL safety and operational instructions and information. Keep it for reference as long as you own this product. Do not discard.

Warning : To operate this Heated Blanket properly and safely, there are some critical safety precautions you need to follow. As with all electrical appliances, there is an inherent danger of overheating, fire. or personal injury if the product is not used correctly. Please read what follows before using your warming product.

DO NOT USE ON PULL-OUT BED OR FOLD-UP BED
IMPORTANT : NEVER PLUG IN YOUR HEATED BLANKET WHILE DAMP

OPERATING INSTRUCTIONS

1. Temperature Setting is shown on the left of the screen, Timer is on the right of the screen.
2. The button on the top left is the “On/Off” switch, the screen will show the “0” setting when you push the “On/Off” switch for one time, but it is not heating now, and it will start heating when you push the “Increase/Decrease” to choose the level you need. When pushing the “On/Off” again, the power will turn off and stop heating.
3. The button on the left bottom is the “Setting & Timer function exchange” button. Press it once, and the Temperature setting flashes, indicating that the heating setting can be adjusted; press it again, the Timer flashes, indicating that you can adjust the timer.
4. Two buttons on the right side are the Increase and Decrease buttons

Be sure to read carefully the accompanying instruction booklet before using this product

• Do not use this bedding with an infant, an immobile person, or anyone insensitive to heat, such as a person with poor blood circulation.
• Do not tuck in the wired area of this product.
• Do not route electrical cords between the mattress and the box spring.
• Do not allow the cords to be pinched.
• Do not use pins – They may damage the electric wiring.
• Keep the control away from drafty areas that may become damp or wet such as an open window.
•  Be sure that this bedding is used on an alternating-current supply circuit of the proper voltage 120V, 60Hz. Turn off or unplug when not in use.
• Do not tuck the blanket or supply cord in a sofa or other furniture. All portions of the blanket or controller should be visible at all times.
• If improper operation of this product is observed, discontinue its use immediately and consult a qualified person regarding its repair. NEVER use your Heated Blanket with an air mattress. The Heated Blanket should never be folded, balled up, or bunched in any way when in use. This may result in overheating. Wrapping of the cord around the controller may damage the cord. Loop loosely when storing.
• Polarized plug blade (one that is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• This blanket is not intended for use in hospitals.
• Children shall not play with the appliance.
• This overblanket must
  • only be connected to the voltage specified on the appliance,
  • and only be operated with the switch indicated on the device (label).
  • not be tucked into the bed or laid around the mattress.
  • never be used with animals,
  • and never be used when damp.
  • never be used if wet.
• While this blanket is switched on.
  • never place any objects on it (e.g. suitcases or laundry baskets).
  • never place any heat source on it, such as a hot water bottle, heating pad etc.
• Do not pull, twist or make any sharp kinks in the cables.
• Do not stick pins, needles or any sharp objects into this blanket.
• When in use, the electronic components in the switch of the blanket make the switch slightly warm. The switch should therefore never be covered or placed on the blanket when it is in operation.
• This blanket may not be used by children unless the switch has been preset by a parent or a supervisory person, or the child has been sufficiently instructed in how to use this blanket safely.
• This blanket must be checked frequently for signs of wear or damage.
• If there are such signs or if the heated blanket has been used incorrectly, it must be taken to either the manufacturer or the dealer before further use.
• When storing the appliance, allow it to cool down before folding. Do not crease the appliance by placing items on top of it during storage.
• Check the cords and control unit regularly for wear or damage. If there is any, return the blanket and control unit immediately to our service address.
• Once the safety system has turned off the blanket, the switch will no longer work and you can not reset it. You must return it, with the blanket, to our service department.
• Do not use with rocking chairs, recliners, chairs with casters or wheels, or other furniture subject to movement.

WASHING INSTRUCTIONS

• Do not dry-clean this bedding. Cleaning solvents may have a deteriorating effect on the insulation of the heating element.
• Wash by hand or as follows in an automatic washer using slow agitation and normal spin speed. Fill the washer with warm water.
• Add a minimum amount of all-purpose detergent, agitate to dissolve, and measure bedding before washing.
• Add bedding and soak for five minutes.
• Agitate for two minutes. Spin. Fill for cool rinse, agitate for one minute then spin.
• Dry in an automatic dryer on high heat, for five minutes only, or line drying.
• Remove damp bedding from the dryer, block to the original size, and drape to finish drying.
• Do not iron your bedding.
• Do not dry clean.
• Never use Bleach.
• For hand washing, wash the Heated Blanket by hand in cold water using a small amount of mild laundry soap or detergent. NEVER rub or scrub. Rinse thoroughly in cool water until all traces of soap or detergent are gone.
• Squeeze excess water out by hand.
• Never iron your Heated Blanket.
• For line drying, dry your Heated Blanket by simply draping it over two parallel clotheslines or a shower rod.
• Never iron your Heated Blanket.

DRYING INSTRUCTIONS

• Tumble dry on low heat.
• Ensure that your Heated Blanket has enough room to tumble freely
• If using a commercial dryer, use air dry or low-setting
• Do not dry-clean this bedding.
• Cleaning solvents may have a deteriorating effect on the insulation of the heating element.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>