Giantex NP11018SL Smokeless Fire Pit for Outside Instruction Manual
- May 15, 2024
- GIANTEX
Table of Contents
Giantex NP11018SL Smokeless Fire Pit for Outside Instruction Manual
Before You Start
Please read all instructions carefully. Retain instructions for future
reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Always place the product on a flat, steady and stable surface
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
PACKAGE CONTENTS
Part | Description | Quantity |
---|---|---|
A | Fire Ring | 1 |
B | Firebowl | 1 |
C | Body | 1 |
SAFETY INFORMATION
Pleas e read and understand this entire manual before attempting to assemble, operate or install the product.
WARNINGS:
- DO NOT allow children or pets near the fire pit without
- DO NOT touch surface of fire pit while in
- FOR OUTDOOR USE ONLY! Burning wood or charcoal indoors can kill It gives off carbon monoxide, which has no odor.
- NEVER burn in vehicles, tents, garages, other enclosed areas or indoors. CARBON MONOXIDE HAZARD.
- NEVER LEAVE FIRE UNATTENDED!
- NEVER place a storage cover on fire pit when in use. Ensure the fire pit and mesh cover have cooled before placing a storage cover over the fire pit.
- DO NOT use under overhead cables or power
CAUTIONS:
- Adequate fire extinguishing material should be readily
- Always ensure that the fire ring is secured over fire bowl while in
- Burn only seasoned hard wood or fire logs or wood pellet in the fire pit.
- DO NOT attempt to move the fire pit while it is hot or in
- DO NOT use gasoline or kerosene to start the fire in your fire
- DO NOT use this outdoor fire pit under any overhead or near any unprotected combustible constructions. Avoid using near or under overhanging trees and DO NOT use this unit on long or dry grass and/or leaves.
- Always use this outdoor fire pit on a hard, level, non-combustible surface such as concrete, rock or stone. An asphalt or blacktop surface may not be acceptable for this purpose. DO NOT use on wooden decks.
- Place the fire pit no closer than 10 feet / 05 meters from walls or combustibles during use.
- Use heat-resistant gloves to handle hot
CALIFORNIA PROPOSITION 65 WARNING: Fuels used in wood or charcoal burning appliances, and the products of combustion of such fuels, can expose you to chemicals including carbon black, which is known to the state of California to cause cancer, and carbon monoxide, which is known to the state of California to cause birth defects or other reproductive harm.
This product can expose you to chemicals including nickel, which is known to the state of California to cause cancer.
For more information go to: www.P65Warnings.ca.gov
PREARARTION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents above. If any part is
missing or damaged, do not attempt to assemble the product. Ask qualified
technician for help.
Tools Required for Assembly: No Tools
ASSEMBLY INSTRUCTIONS
- Put the Wind Plate (A) onto the Firebowl (B).
CARE AND MAINTENANCE
- Allow the fire pit to cool completely before moving the fire
- To extend the life of your fire pit, clean it after each
- To protect fire pit finish, use a soft cloth to wipe fire
- Do not attempt to clean while
- Store in a cool, clean, dry
- Clean fire bowl after each use once ashes have
- Place a storage cover over the fire pit once it has
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>