melchioni MF1681BR Stand Fan 5 Blades 40cm Instruction Manual

melchioni MF1681BR Stand Fan 5 Blades 40cm

READ ALL INSTRUCTIONS BEFORE USING

INTRODUCTORY NOTE

Melchioni S.p.a., owner of the Melchioni Family brand, thanks you for purchasing this fan. It represents the result of careful selection and improvement work, to offer a high-performance, reliable, safe and planet- friendly appliance. Thanks to the profuse commitment and experience gained over many years of presence on the market, the Melchioni Family range ensures satisfaction to both the occasional user and the more demanding consumer. In order to obtain the maximum performance available, as well as total safety use, we invite you to read the contents of this manual completely and carefully follow the instructions, as well as to keep it for future reference. Melchioni S.p.a. is at your disposal to offer support in installation and use, but also for reports and suggestions.

IMPORTANT INSTRUCTIONS FOR THE PRODUCT INSTALLATION AND SAFE USE

To minimize the possible risks related to the installation and use of the product, carefully read and scrupulously comply with the following instructions:

• The product is designed for domestic use only. Compliance with the declared performance and the safety requirement in case of intensive use in a professional environment is not guaranteed.
• The product is not intended for use in industrial environments, large commercial areas, large public areas or communities, cellars, garages, pergolas, porches or other arrangements that may expose it to atmospheric agents.
• The product is intended for indoor use: if used outdoors, the safety requirement is not guaranteed and risk situations may occur for the user’s safety.
• The product should not be used by children unless they are instructed on how to use it and the information has been understood.
• The product must not be used by children even after it has been decommissioned, as it contains details that could be dangerous.
• The product should not be used by people with reduced motor or cognitive abilities unless they are adequately supervised.
• Do not use the device in the presence of liquids: ensure sufficient distance from containers, tanks, taps, pipes, dehumidifiers, expansion or storage vessels, downspouts, loading and discharge pipes, etc.
• The product must not be used if there are any deformities, even partial color changes, openings in the casing, cracks, excessive heating, smoke emissions, vapors, bad smells, or unusual noises; in this case, stop using it immediately and contact qualified technical personnel.
• Before proceeding with installation, make sure that the rated voltage indicated on the technical data plate on the appliance corresponds to the mains voltage.
• Before proceeding with the installation, make sure that the electric plug is disconnected from the mains. Never start the operation of the appliance in any way unless after assembly and installation.
• The appliance must not be installed near windows or openings which could expose it to the elements, nor near curtains, ornamental plants or other objects that could collide with moving parts.
• The product must be placed on a horizontal, flat, and stable surface.
• The device must not be placed within the opening range of doors and windows, rolling shutters, curtains, rockers, movable walls or the like.
• Do not move the product while it is in operation.
• Do not use the product if it has been dropped: carry out an integrity check by competent technical personnel.
• Do not place any objects in the swing area of the fan during operation: this behavior involves the risk of injury; in any case avoid stopping the oscillation of the fan during operation and constantly check that this circumstance cannot occur accidentally.
• Do not cover the fan in any way; do not use the grill to hang out damp fabrics, clothes or other objects and indeed periodically make sure that no object can obstruct the air circulation of the fan in any way.
• Do not introduce any object into the grill and make sure that this cannot happen during the entire period of operation: this, in addition to creating a risk of injury to the people around it, seriously compromises the reliability of the product, almost certainly causing breakdowns.
• Before proceeding with cleaning operations, make sure that the appliance has been off for at least 15 minutes and that the electrical plug has been disconnected.
• To clean the product, use a damp cloth and avoid any abrasive or aggressive detergent; wait for it to dry completely before putting it back into operation.
• Do not install or use the appliance in direct sunlight or in the range of action of other ventilation appliances, in environments that are excessively humid, saturated with gases, vapors or other suspended substances, near open flames, flammable, oxidizing or explosives.
• Do not use near burners, fireplaces, pellet stoves, gas cookers and the like, especially if extinguishing these flames would cause gas leaks.
• Do not use the product to extinguish flames
• Make sure to connect the appliance to a standardized system built according to state-of-the-art criteria, equipped with a differential switch and magneto-thermal switch.
• Do not connect the appliance to devices such as timers, remote controls or automatisms.
• Do not leave packaging materials unattended, especially plastic bags, as they could be dangerous for children or people with reduced physical or cognitive abilities.
• Do not disassemble the appliance, even after it has been decommissioned. At the end of its life cycle, it must be disposed of by current legal requirements detailed in the following chapter.
• Do not modify the appliance for any reason: no performance improvement will be obtained as a result of interventions on its parts. Any modification invalidates the legal guarantee and the safety requirement, with possible risks for the user.
• Do not remove or modify the safety devices with which the product is equipped.
• Do not disconnect the product from the mains by pulling it by the cable: grasp the plug firmly and pull it out with a quick and decisive movement.
• Never immerse any part of the appliance in water or other liquids: avoid spraying any substance near the appliance or directly on it, especially if it is running.
• Any slight smoke or burning smell upon initial start-up is normal and does not constitute an anomaly: this emission should stop after a few seconds of operation.
• Periodically check the state of conservation of the various parts of the appliance: if you notice breakages or anomalies, do not use it and contact qualified personnel; pay particular attention to the condition of the cable.
• If the appliance is not going to be used for a long time, it is advisable to disconnect it from the mains and not just stop it using the specific command.
• Before restarting the appliance following a stop, wait for the propeller to have finished rotating by inertia.
• During use, it is not advisable to stand in front of the appliance for a long time, especially if in the direction of the flow: this circumstance has an impact on the health and well-being of the user on a multi-system level; to mitigate the effects of the draft, it may help to start the rocking mechanism.
• Use the appliance for its intended purposes only, as indicated in this instruction manual

PARTS IDENTIFICATION

Check that all the elements shown in the figure are present in the package: if there are any missing or damaged parts, do not proceed with the assembly and commissioning in any way and contact the dealer to have the equipment restored.

ASSEMBLY

• Insert the fixed stem into the hole in the center of the basement and press it down.
• Screw the stem fixing screw into the hole under the base as shown in the figure.
• Turn the base upside down and place it on the ground on a horizontal and stable surface.
• Turn the stem ring counterclockwise and pull the extractable stem completely out.
• Fix the extractable stem by turning the ring clockwise.
• Fully insert the motor unit (6 + 7 + 8 + 9 + 10) into the extractable stem as in the figure, matching the screw with the special recess provided in the extractable stem; it may be helpful to slightly unscrew the fixing of the stem (11), trying not to extract it completely so as not to let the internal nut come out. In this case, refit the nut and partially tighten the fixing.
• Rest the rear grid on the motor, orienting the handle upwards, tomatch the pins of the motor plate with the central holes at the top of the center of the grid.
• Screw the grid nut onto the motor thread by turning it clockwise until it is fully tightened.
• Insert the propeller on the motor shaft, taking care to match the cross pin of the shaft with the groove on the rear part of the propeller.
• Screw the propeller nut firmly onto the motor shaft by turning it counterclockwise.
• Rest the front grid on the perimeter of the rear one, taking care to match the screw+nut holes on the lower part of both grids.
• Close the perimeter fastenings of the grids so that they join the edges of both grids.
• Fix the screw and the nut on the lower part of the grids so that they further hold the edges together.

USE

The front keyboard

Button /LED| Function with

fan off

| Function with fan on
---|---|---
Button| ON/SPEED| Start ventilation at low speed (LOW)| Varies the rotation speed, sequentially at low (LOW), medium (MID) and high (HIGH) speeds
Button| MODE| No function| Change the ventilation mode, sequentially in natural mode (NATURE),

sleep mode (SLEEP) and continuous

Button| TIMER| No function| Varies the auto-off time, sequentially in

0:30 hour steps up to 7:30 hours

Button| OFF| No function| Stop ventilation
LED| HIGH|  | Indicates high rotation speed
LED| MID|  | Indicates medium rotation speed
LED| LOW|  | Indicates low rotation speed
LED| NATURE|  | Indicates natural ventilation mode
LED| SLEEP|  | Indicates night ventilation mode
LED| POWER|  | Indicates correct electrical connection
LED| 0.5H|  | Indicates 0:30 hours at auto power off
LED| 1H|  | Indicates 1 hour at auto power off
LED| 2H|  | Indicates 2 hours at auto power off
LED| 4H|  | Indicates 4 hours at auto power off

The buttons on the front keyboard are also replicated on the remote control, with the same function.

The sleep timer:
The appliance stops automatically after a pre-set period of operation by repeatedly pressing the TIMER key: subsequent pressures cause one or more LEDs to light up, depending on the setting given, according to the following table:

The LEDs each indicate a certain period of time, the duration of which must be added up for each of the lit LEDs

The ventilation mode:
In the absence of selecting a specific mode, the fan offers a constant flow of air; however, this situation can be annoying or unnatural, therefore two further modes are available, which can be selected with the MODE key:

• Mode NATURE (natural): The airflow is varied randomly every approximately 5 seconds, even by stopping and restarting it, up to the selected maximum speed; this makes the flow similar to natural ventilation outdoors.
• Mode SLEEP (sleep): The airflow is varied randomly every 10 seconds, even stopping and restarting it, up to the selected maximum speed; this makes the flow suitable for the ventilation of rooms dedicated to rest.

In the absence of the selection of a ventilation mode, if the SLEEP and NATURE LEDs were both off, the flow would be continuous and correspond to the selected speed.

Propeller swing
By fully pressing the relative control (8) the propeller swing function on the horizontal plane starts: the fan head swings alternately along an arc of about 65°, to make the direction of the flow discontinuous so that it is less direct and annoying. By pulling the control, the oscillation stops. It is strongly recommended to stop the operation before acting on the control and wait for the propeller to stop completely.

CARE AND MAINTENANCE

The product does not require any maintenance. For cleaning, use a damp cloth, avoiding any aggressive or abrasive detergent. It is essential to disconnect it from the mains before cleaning. Do not use compressed air to clean the propeller and in any case never act to facilitate its rotation except with normal use of the appliance. Wait for it to dry completely before reconnecting the appliance to the mains.

PROBLEMS AND SOLUTIONS

If the appliance presents anomalous operating conditions, in addition to what is reported in the previous chapter 2, it is advisable to consult the following table in to find possible simple solutions.

disconnected from the mains

| Insert the plug into a standard

10A socket

The socket the fan is plugged into is not working| Check the efficiency of the socket by connecting another device surely working. If necessary, contact an

electrician

Swing does not start| Control (7) is not fully pressed| Control (7) is not fully pressed
The swing does not stop| Control (7) is not fully extracted| Pull out the command (7)
The fan is particularly noisy| The parts have not been fully secured| Review the assembly process by tightening the screws and bolts

more tightly

If the product shows malfunctions or anomalies other than those indicated, probably, the problem cannot be solved independently. In this case, consult qualified technical personnel.

TECHNICAL DATA

• Supply voltage : 230 VAC 50 Hz (+ – 10%)
• Power : 30 Watt
• Height: 125 cm
• Swing arc: about 65°
• Cable length: 150 cm

PRODUCT CONFORMITY

The producer Melchioni Spa declares that the product Stand fan 5 blades 40 cm mod. MF1681BR (code 118620054) is in compliance with Directive 2014/30/EU of the European Parliament and of the Council, of 26 february 2014, on the harmonization of the laws of the Member States relating to electromagnetic compatibility. The producer Melchioni Spa declares that the product Stand fan 5 blades 40 cm mod. MF1681BR (code 118620054) is in compliance with Directive 2014/35/EU of the European Parliament and of the Council, of 26 February 2014, on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits. The producer Melchioni Spa declares that the product Stand fan 5 blades 40 cm mod. MF1681BR (code 118620054) is in compliance with Directive 2009/125/EC of the European Parliament and of the Council, of 21 october 2009, establishing a framework for the setting of ecodesign requirements for energy-related products. The producer Melchioni Spa declares that the product Stand fan 5 blades 40 cm mod. MF1681BR (code 118620054) is in compliance with Directive 2011/65/EU of the European Parliament and of the Council, of 8 June 2011 and subsequent Commission Delegated Directive 2015/863, on the restriction of the use of certain hazardous substances in electrical and electronic equipment. According to Directive 2012/19/EU of the European Parliament and of the Council, of 4 july 2012, on waste electrical and electronic equipment (WEEE), the presence of the crossed-out bin symbol indicates that this appliance is not to be considered as urban waste: its disposal must therefore be carried out by separate collection. Disposal in a non-separate manner may constitute a potential harm to the environment and health. This product can be returned to the distributor when purchasing a new device. Improper disposal of the appliance constitutes misconduct and is subject to sanctions by the Public Security Authority. For further information, contact the local administration responsible for environmental matters.

WARRANTY

Melchioni Spa, based in Milan (Italy), via Colletta 37, recognizes a conventional guarantee on the product for a period of two years from the date of the first purchase by the consumer. This guarantee does not affect the validity of the legislation in force concerning consumer goods (Legislative Decree 6 September 2005 n. 206 art. 128 and following), of which the consumer remains the owner. This guarantee applies to the entire territory of the European Union. The components or parts that are found to be defective for ascertained manufacturing causes will be repaired or replaced free of charge through the dealer, during the above warranty period. Melchioni Spa reserves the right to make a complete replacement of the device, if repairability is impossible or excessively expensive, with another device of similar characteristics (Legislative Decree 6 September 2005 no. 206 art. 130) during the warranty period. In this case, the validity of the warranty remains that of the original purchase: the service provided under warranty does not extend the warranty period. In any case, this appliance will not be considered defective in terms of materials or manufacture should it be adapted, changed or adjusted, in order to comply with national or local safety and/or technical standards, in force in a country other than that for which it is was originally designed and manufactured. This appliance has been designed and built for domestic use only: any other use will invalidate the benefits of the guarantee.

• parts subject to wear or tear, nor those parts that require periodic replacement and/or maintenance
• professional use of the product
• malfunctions or any defects due to incorrect installation, configuration, software / BIOS/firmware update not performed by authorized Melchioni Spa
• repairs or interventions carried out by persons not authorized by Melchioni Spa
• manipulation of assembly components or, where applicable, of the software
• defects caused by fall or transport, lightning, voltage fluctuations, liquid infiltration, opening of the appliance, bad weather, fire, public disturbances, inadequate ventilation, or incorrect power supply
• any accessories, for example: boxes, bags, batteries, etc. used with this product
• home interventions for convenience checks or presumed defects

The recognition of the guarantee by Melchioni Spa is subject to the presentation of a tax document that proves the actual date of purchase. The same must not show any tampering or deletions, in the presence of which Melchioni Spa reserves the right to refuse the provision of treatment under warranty. The warranty will not be recognized if the serial number or model of the appliance is non-existent, abraded, or modified. This warranty does not include any right to compensation for direct or indirect damage, of any nature, to people or things, caused by any inefficiency of the appliance. Any extensions, promises, or services in this regard, insured by the retailer, will be borne by the latter. The warranty does not cover:

Melchioni Spa
Via P. Colletta 37, 20135 Milano | clienti@melchioni- ready.com | www.melchioni- ready.com

References

• Ready.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>