DOORADO AGO-CK00-0Z Gate Opener Remote Control Instruction Manual
- May 15, 2024
- DOORADO
Table of Contents
DORADO AGO-CK00-0Z Gate Opener Remote Control
Product Information
Specifications:
- Dimensions: Not specified
- Power Supply: Not specified
- Signal Frequency: Not specified
- Signal Range: 30 meters
- Net Weight: 47 grams
Product Usage Instructions
Operation:
The gate opener remote control has four commands: OPEN, STOP, CLOSE, STOP.
Follow these steps for operation:
- Press once to begin opening the gate.
- Press a second time to stop the gate.
- Press a third time to close the gate.
- Press a fourth time to stop the gate.
If the gate reaches its magnetic limits, STOP commands will be skipped. Instead, a closed gate will start opening immediately, and an open gate will start closing. Some models may have a pedestrian mode activated by the fourth button, allowing partial gate opening for foot traffic.
Pairing:
For most CO-Z gate openers:
- Access the gate opener circuit board.
- Press the button labelled AN on the board.
- Press any unpaired button on the remote control twice.
- The light labelled LEARN should flash to indicate successful button pairing.
To pair additional buttons, repeat the above process. Avoid pairing a single button to multiple devices simultaneously. For other gate openers, refer to their manuals for remote pairing instructions.
Resetting:
For most CO-Z gate openers:
- Access the gate opener circuit board.
- Hold the button labelled AN.
- The light labelled LEARN will come on and then turn off, indicating all paired buttons have been deleted.
When using other gate openers, consult their manuals for resetting system memory instructions.
Contact Us:
If you have any questions or need assistance, contact us at
[email protected]. We are here to
help!
FAQ:
- Q: How can I get a .pdf copy of the latest version of the instructions?
A: Use the appropriate app on your smartphone to scan the QR code provided with the product to download the latest version of the instructions.
Safety Information
Warning!
- ONLY permit children to use this device under close and constant supervision.
- DO NOT pair any button of this device with more than one gate opener circuit board.
- ONLY use this remote control when the gate can be seen and there are no obstructions to its path of travel.
- Cease use IMMEDIATELY if any irregularity occurs during use. Recalibrate, repair, or replace problematic parts before further use.
Specifications
| Dimensions | 3.1×2.4x 1.3 in. | 7.9x6x3.2 cm |
|---|---|---|
| Power Supply | 1 x 23A Battery | |
| Signal Freq. | 43i92 Mhz | |
| Signal Range | 98 fl. | 30 m |
| Net Weight | 1.7oz. | 47 g |
Operation
Normally, the buttons cycle through the four commands OPEN→STOP→CLOSE→STOP.
- Press once to begin opening the gate.
- Press a second time to stop the gate.
- Press a third time to close the gate.
- Press a fourth time to stop the gate.
At a gate’s magnetic limits, STOP commands will be skipped. Instead, a closed gate will begin opening immediately. An open gate will begin closing. On some models, the fourth button may activate its pedestrian mode, which only partially opens the gate to allow foot traffic.
Pairing
For most CO-Z gate openers:
- Access the gate opener circuit board.
- Press the button labelled AN on the board.
- Press any unpaired button on this remote control twice.
- The light labelled should flash to indicate the button pairing was successful.
To pair additional buttons, repeat the process above. Never pair a single button to more than one device at the same time. For use with other gate openers, see their separate manuals for details on remote pairing.
Resetting
For most CO-Z gate openers:
- Access the gate opener circuit board.
- Hold the button labelled AN.
- The light labelled LEARN should come on and then go out to indicate that all paired buttons have been deleted from memory.
When using other gate openers, see their separate manuals for details on resetting system memory.
Contact Us
- Thank you for choosing our products! If you have any questions or comments, contact us at [email protected] and we’ll resolve your issue ASAP!
- For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.