tp-link TL-SG605 58 Port Gigabit Desktop Switch Installation Guide

tp-link TL-SG605 58 Port Gigabit Desktop Switch

Product Information

Specifications

• General Specifications:

  • Standard Protocol: IEEE802.3, IEEE802.3i,
    IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.1p

  • Data Transfer Rate: Ethernet: 10 Mbps (Half
    Duplex), 20 Mbps (Full Duplex); Fast Ethernet: 100 Mbps (Half
    Duplex), 200 Mbps (Full Duplex); Gigabit Ethernet: 2000 Mbps (Full
    Duplex)

  • Network Media (Cable): 10Base-T: UTP category
    3, 4, 5 cable (maximum 100 m); EIA/TIA-568 100 STP (maximum 100 m);
    100Base-TX: UTP category 5, 5e cable (maximum 100 m); EIA/TIA-568
    100 STP (maximum 100 m); 1000Base-T: UTP category 5e cable (maximum
    100 m)

  • Interface: 5/8 10/100/1000 Mbps
    Auto-Negotiation RJ45 Ports

  • LED Indicators: Power, Link/Act LED

  • Advanced Features: IGMP Snooping, QoS
    (802.1p/DSCP Priority), Store-and-Forward

  • Transfer Method: Automatically learning,
    automatically aging

  • MAC Address Learning: Yes

  • Frame Forward Rate: 10Base-T: 14881pps/Port,
    100Base-TX: 148810pps/Port, 1000Base-T: 1488095pps/Port

  • Wall Mountable: Yes

  • Distance Between Mounting Holes: TL-SG605: 39
    mm, TL-SG608: 94 mm

Product Usage Instructions

Connection Setup

1. Connect the TL-SG608 switch to the power adapter and ensure the
   power LED is lit.

2. Connect the switch to your router using an Ethernet cable from
   the Router LAN Port to any available Ethernet Port on the
   switch.

3. Connect your devices (such as PCs) to the remaining Ethernet
   Ports on the switch using Ethernet cables.

LED Explanation

• Power LED:

  • On: Power on
  • Off: Power off

• Link/Act LED:

  • On: Running at 10/100/1000 Mbps

  • Off: No device is linked to the corresponding
    port

  • Flashing: Transmitting/receiving data

Frequently Asked Questions

Q1. The Power LED is not lit.

The Power LED should be lit when the power system is working normally. If the Power LED is not lit, check as follows:

1. A1: Make sure the power adapter is connected to the switch with power source properly.
2. A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
3. A3: Make sure the power source is ON.

Q2. The Link/Act LED is not lit when a device is connected to the corresponding port.

It is recommended that you check the following items:

1. A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
2. A2: Make sure the connected device is turned on and works normally.
3. A3: The cable must be less than 100 meters long (328 feet).

Safety Information

Keep the device away from water, fire, humidity, or hot environments. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. Adapter shall be installed near the equipment and shall be easily accessible.

Contact Information

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit TP-Link Community. For technical support and other information, please visit TP-Link Support, or simply scan the QR code provided with the product.

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity may be found at EU Declaration of Conformity.

5/8-Port Gigabit Desktop Switch

LED Explanation

Power

• On: Power on
• Off: Power off

Link/Act

Note:
For simplicity, we will take TL-SG608 for example throughout this Guide.

Connection

Specifications

General Specifications

Environmental and Physical Specifications

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.

For technical support and other information, please visit https://www.tp- link.com/support, or simply scan the QR code.

References

• TP-Link Community
• CE Regulatory Compliance | TP-Link
• TP-Link Product Support - Wireless Networking Equipment Support
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>