MNN M160Q1 Portable Monitor 16.0inch QHD 2K Laptop Monitor User Manual

PORTABLE MONITOR
M160Q1
User Manual

• Please read the manual carefully before you use the product, and keep the manual well after using.

Customer Service

Email US
Customer Support: support@mnntech.com

https://qrs.ly/ipeez3r

About Your Monitor

Monitor Specifications

Product List
Please contact us if anything is missing or damaged.
support@mnntech.com

| MNN Portable Monitor
---|---
| Magnetic Cover/Stand
Watch the video to learn how to use the cover as stand
| USB Type C to USB Type C Cable
For power and video signal transmission.
Can be connected to the Type-C port of your device for power and display by single cable.
| Mini HDMI to HDMI Cable
For video signal transmission
External power supply is required.
| USB Type A to USB Type C Power Cable For power only.
Does not support video signal transmission
| Power Adapter
5V 2A (OW)

Identifying Parts and Controls

1. Mini HDMI

2. Full Function Type-C Port (For power, video, audio and touch signal)

3. 3.5mm Headphone Jack

4. OTG interface (suitable for mouse, keyboard and other equipment connection)

5. Multi-Function Key
   a. Press in the middle: Deploy the menu
   b. Scro// up/down: Nabigate the menu

6. Power ndicator Light

7. Power Button
   a. Press the button for 5seconds: Turn off
   b. Short presswhen one the menu: Go back to last layer

Using the Monitor

How to use the monitor cover as a stand Use the smart cover to make the monitor stands at a proper viewing angle.

Connecting your Monitor
Laptop/PC Connection

1. Laptop/PC with Type-C port NOTE: Please use the wall charger to power on the monitor to avoid black or flashing screen when power supply is not enough. NOTE: USB-A to USB-C cable cannot be used for video transmission.
   The Type-C port of some devices does not support display and only supports charging. If it displays “No Cable”, please contact us for help.
   (support@mnntech.com)

2. Laptop/PC with HDMI port NOTE: Please use the wall charger to power on the monitor to avoid black or flashing screen when power supply is not enough.

3. Laptop/Pc with (mini) DisplayPort e.g. Surface Pro NOTE: Please use the wall charger to power on the monitor to avoid black or flashing screen when power supply is not enough. NOTE: (Mini)DP to HDMI adapter is not included in package, please contact us to get the adapter for free( support@mnntech.com )
   PS5/PS4/Xbox Connection
   NOTE: Please use the wall charger to power on the monitor to avoid black or flashing screen when power supply is not enough.

Switch Connection NOTE: Switch cannot provide enough power supply for monitor.
Please use Switch original PD charger and plug it into the Type-C port of monitor. Or it may not work if using other chargers.
Phone Connection NOTE:
– Phones may not be able to provide enough power supply for monitor with high brightness, please plug in wall charger to Type-C port to power on the monitor, then plug in USB-C cable connected to phone to another Type-C port.
– Some phones like Google Pixel do not support video output. NOTE: A Lightning to HDMI adapter is required for iPhone. Please contact us to get the adapter for free. (support@mnntech.com)

iPhone Connection with Lightning to HDMI adapter

1. Use the charger to provide power supply for the adapter.
2. Connect the adapter to your iPhone.
3. Connect the monitor to the adapter by HDMI cable.

NOTE: Please also plug in a wall charger to the lightning port of the adapter to power on the adapter and make it work.
Using the On-Screen Display(OSD) Menu
**Brightness/Volume Menu![MNN Portable Monitor 16.0inch QHD 2K Laptop Monitor

• Menu](https://manuals.plus/wp-content/uploads/2024/03/MNN-Portable- Monitor-16.0inch-QHD-2K-Laptop-Monitor-Menu.png)** – Scroll up the Menu Button to open the Brightness Menu.
  – Scroll down the Menu Button to open the Volume Menu.

Main Menu – Press the Menu button to open and display the OSD menu.
– Scroll up and down to toggle between options.
– Press the Menu button to select the highlighted item
– Scroll up and down to select the desired parameter.
– Press the Menu button to enter the slide bar of options.
– Press the Exit button to return to previous menu without.
– saving current settings or Press Menu button to confirm settings.

Brightness/Contract – Brightness: Allows you to adjust the brightness or luminance of the backlight (Range: 0~100).
– Contrast: Adjust the contrast between the objects and background. (Range: 0~100).
– ECO: 4 image modes (Standard/Game/Movie/Photo).
– Sharpness: Make the outline of objects more clear(Range: 0~4).
– DCR: Select On / Off to enable / disable dynamic contrast ratio.
NOTE:
– When the monitor is connected to phones, if there is no external power supply and the brightness is adjusted to a high value, brightness will be automatically adjusted to 30 because of not enough power supply. Please use the wall charger to power on the monitor to avoid black or flashing screen.
– Brightness and Contrast cannot be adjusted if ECO is set to “Game / Movie / Photo” mode or DCR is turned

IMAGEM
Aspect: Display image scale, 16:9/4:3 set
Color Temp
– Color Temp: Adjust the tint of screen to 9300k, 6500k, sRGB, User.
GAMING -Game Mode: You can quickly change tho set brightnessos screen
– FreeSyne: FroeSync technology is a solution that eliminates tearing without all the usual lag and latency.
– HDR: Set the HDR Mode to AUTO/OFF/ON.
OD: To adjust the color saturation – range 0-100
NOTE: Brightness Contrast and ECO setting can not be adjust if HDRis turned on.(Set to ON)
OSD SETTING – Language : there are 13 language choices available
– OSD H.POS.: Position the menu window horizontally
– OSD V.POS.: Adjust the position of the menu window vertically
– OSD Timer: The menu window disappears automatically in seconds
– Transparency: Menu window transparency settings
RESET – Reset: Reset all display settings
– Auto Powerdown: Automatic shutdown
– HDR MODE: HDR turns on or off
NOTE: Brightness, Contrast and ECO settings cannot be adjusted if HDR is turned on (set to 2084).
MISC – Signal source: Signal source selection
– Low BLUE LIGHT: Decreasing the blue light emitted from the display
– VOLUME: stimulating image while reading on the screen (Range: 0~ 100). Volume
– setting: 0-100.
– Freesync: Monitor response speed increased switch
Using the Duplicate/Extend/Second Screen
Windows
– Right click on the desktop and select “Display settings’.
– Scroll down to the “Multiple Displays’ option.
Select “Duplicate these displays’ or “Extend these displays’ or “Show only on 2’ for Different Modes. How to extend a second screen on the left side
– Right click on the desktop and select “Display settings’.
– In the top section of that window, you will see an image of each screen with numbers.
– Press and hold the left mouse button and drag that image to the opposite side of the image on the right and release the mouse cursor.
– Click Apply.
Rearrange your displays
Select a display below to change the settings for it. Press and hold (or select) a display, then drag to rearrange it.

Mac OS
– Choose Apple menu > System Preferences, click Displays.
– Click the Arrangement tab.
– Make sure that the Mirror Displays checkbox isn’t selected for Extend Mode or is selected for Mirror Mode. Using the Portrait /Landscape Mode

Mac OS
– Choose Apple menu > System Preferences.
– Hold down the Cmd+Option(alt) keys and click on “Displays”
– Look for the newly visible ‘Rotation’ drop down menu. Windows
– Right click on the desktop and select Display settings.
– Scroll down to the “Display orientation’ option.
– Selecting “Landscape’ or “Portrait”. Supported Devices and Models
Phone

Laptop

2018
Google| Chromebook Pixels, Pixelbook Pen
Lenovo| Savior Y7000, Savior Y7000P, Savior Y9000K, YOGA 6 Pro,
ThinkPad X1 Carbon, Yoga 5 Pro, Miix 720
DELL| G3 Series, G5 Series, G7 Series, Inspiron 5000, Inspiron 7000, XPS13, XPS15
HP| EliteBook 105001, EliteBook Folio G7, Omen 4 Pro, Pavilion X2
Microsoft| Surface Book 2
ASUS| Lingyao 3, U306, 0321 Series, 04100, ROG Series
HUA WEI| MateBook D
Razer| Blade Stealth
More Brands| updating

Troubleshooting

Please feel free to contact us for any problem.
  support@mnntech.com

Black screen or No signal

1. Please use the original accessories we provide ( cables and charger).
   USB 3.0 A Male to USB Type c cable does not support video signal transmission.

2. Please plug in the wall charger to Type-C port for power supply and wait for the screen displays “no signaf’, then plug in the USB-C cable to another Type-C port or HOM/ cable to MiniHDMI port for video signal transmission.

3. For single USB-C connection for power and display, the Type-C port of some devices like HP Elitebook, Acer Aspire does not support video output and only supports charging. Please contact us to help you confirm if your device supports.

4. Please set the display mode to Extend in Windows.

5. Connect the monitor to other devices to check if the monitor can work well with other devices.

6. Please contact us for help ( support@mnntech.com)

How to connect this monitor to laptop without HDMI port like?
Microsoft Surface Pro, Surface Book, HP EliteBook, etc.
A (mini) DP to HOM/ adapter is required to connect the monitor to your device. Please contact us toget the adapter for free.
( support@mnntech.com)
The stand is flimsy. How to use the monitor cover as a stand?
Please refer to Page 4 for detailed instrcutions.
Monitor keeps flashing/restarting

1. Flashing or continuously restarting is usually caused by not enough power supply.
   If the monitor and your device are connected by single USB-C cable, some laptops and phones cannot provide enough power supply for this monitor. Please plug in wall charger to Type-C port of monitor for enough power supply.

2. Please contact us for help ( support@mnntech.com)

I use the USB Type C to USB 3.0 A Male cable to connect the monitor to my device, but it displays “no signal” The USB Type C to USB 3.0 A Male cable can only be used for power supply.
This cable does not support video transmission.
My Android Phone is equipped with Type-C port. But it does not work with this monitor.

1. Phones may not be able to provide enough power supply for the monitor, please plug in the wall charger to Type-C port, then connect phone to another Type-C port by USB-C cable.
2. The Type-C port of some phones does not support display and only supports charging. For example, the Type-C port of Google phones like Pixel does not support video output. An Android to HDTV cable is required to mirror the screen. Contact us to get the HDTV cable. ( support@mmnntech.com)

How to extend a second screen on the left side?

1. Please refer to Page 14 for instruction.
2. Please contact us for help ( support@mnntech.com)

Can the monitor work with Apple iPhone?

Yes. A Lightning to HDMI adapter is required for iPhone to work with the monitor. Please refer to Page 8 and contact us to get the adapter for free.
( support@mnntech.com)
Can this monitor work with iPad?
Yes. If the port of iPad is Type-C port, the monitor will work well with iPad by single USB-C cable. But for iPad with lightning, a lightning to HDMI adapter is required to work with the monitor. Please contact us to get the
free adaptert (   support@mnntech.com)
How to save the setting of brightness?
The monitor will automatically save all settings when using USB-C connection or HDMI connection for display. As for single USB-C connection for power and display, if the device cannot provide enough power supply for this monitor, then the monitor will reset the brightness to 30 automatically.
Why the brightness and contrast cannot be adjusted?
The brightness and contrast cannot be adjusted if HDR is turned on, or ECO is set to “MOVIE, GAME, TEXT..” mode, or DCR is turned on. Please refer to Page 12 to reset these settings.

support@mnntech.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>