WASSERWERK WK7 With Pull Out Dish Rinser User Manual
- May 15, 2024
- WASSERWERK
Table of Contents
WASSERWERK WK7 With Pull Out Dish Rinser
Specifications
- Model: WK7
- Features: Pull-out dish rinser
- Origin: Made in Germany
- Manufacturer: W. Kirchhoff GmbH
- Website: www.wasserwerk.de
Product Information:
The WK7 model is a high-quality kitchen faucet with a pull-out dish rinser,
designed and manufactured by W. Kirchhoff GmbH in Germany. It is suitable for
use with cold water supply and is not recommended for other purposes to avoid
accidents.
Installation Instructions:
- After mounting, adjust the hot and cold water mix using a mechanically adjustable valve.
- Ensure proper installation by qualified personnel to prevent accidents.
- Check all connections for leaks before use and tighten if necessary.
Safety Guidelines
- Never leave the faucet unattended with children around.
- Avoid placing the faucet under tension or using it with high-pressure systems.
- Dispose of packaging materials properly and keep them away from children.
Maintenance
Regularly check connections for leaks and replace any worn-out parts. If
water flow stagnates, contact the service center for maintenance. Do not use
stagnated water for consumption or cooking.
Product Usage
- Adjust the pull-out dish rinser to the desired positions for different water flow types.
- Follow the manufacturer’s instructions for adjusting water temperature using the handle and hexagonal key provided.
- For cartridge replacement or faucet disposal, refer to the
- manual for detailed instructions.
Disclaimer
The images in the manual are for illustrative purposes. Actual products may
have variations.
Frequently Asked Questions (FAQ)
-
1. **Q: Can the WK7 model be used with hot water?**A: The WK7 model is recommended for use with cold water only to prevent accidents and ensure proper functionality.
-
Q: How often should I perform maintenance on the faucet?
A: Regularly check for leaks and follow the maintenance schedule provided by the manufacturer to ensure optimal performance.
Manual
Dear customer,
You have purchased a high-quality and long-lasting product from our line of
goods. Please read these instructions carefully before assembling and pay
attention to the notes. Therefore, keep the instructions in a safe place and
pass them on to possible subsequent owners.
PROPER USE
The faucets are intended exclusively for regulating the hot and cold water
supply. The sink faucet is only intended for installation on sinks. Any other
use is considered improper and bears considerable risk of accidents or damage
to property. The faucets are suited only for the operation of instantaneous
water heaters (if the instantaneous water heater is suited for operation with
mechanically adjustable mixers) and boilers.
INSTALLATION INSTRUCTIONS
- Please let only a competent person carry out the installation.
- Incorrectly installed faucets can cause water damage!
- CAUTION WATER DAMAGE! Please switch off the general water supply before installation.
- Make sure that all seals are correctly seated.
- Do not twist the hoses or energise them!
- Check all connections for tightness after the first commissioning.
- The warranty excludes in particular consequential damage caused by faulty installation!
FLUSHING AFTER INITIAL INSTALLATION
After installation, unscrew the mixer jet, and flush the pipeline and the faucet thoroughly for 2 minutes (hot/cold water supply), to flush out any dirt (chips). After flushing the faucet, screw the mixer jet back onto the outlet.
SAFETY NOTES
DANGER TO BABIES AND CHILDREN:
Never leave children unattended with the packaging material. Keep the
packaging materials and small parts supplied with the faucet away from babies
and small children. Risk of suffocation. The product is not a toy.
- These faucet are NOT suited for use on low-pressure equipment and open (unpressurized) electrical small water heaters.
- Suitable for instantaneous water heaters.
- We recommend the installation of a filter in the installation or at least the use of angle valves with filter to prevent foreign bodies from entering and causing damage to the cartridge.
- Faucet for use in private households! Only suitable for use in rooms with a temperature above 0°C. If there is a risk of frost, interrupt the water supply and drain the faucet.
- WARNING when set on hot water supply: Danger of scalding!
- The faucet has an adjustable hot limit ring.
- Make sure that no caustic or corrosive agents, such as cleaning agents or household detergents get in contact with the connection hoses, as this can cause water damage.
- There could be sharp edges, even with careful production. Please be careful.
TECHNICAL DATA
-
Flow pressure: Recommended as 1.5 to 6 bar; in case of more than 6 bar connection pressure, we recommend that a pressure reducer is installed.
-
Water temperature: max. 60 °C.
INSTRUCTIONS FOR CARE Sanitary faucets require special care. Therefore please pay attention to the following instructions: -
Chrome-plated surfaces are sensitive to agents used to dissolve limescale, acidic cleaning agents and all types of abrasive cleaners.
-
Colored surfaces must never be cleaned with abrasive, caustic or alcohol-based agents.
-
Clean your faucets with clear water only, using a soft cloth or chamois.
-
Please make sure that the cleaners do not enter the cartridge housing. This can lead to a stiff operating lever and noises.
-
Do not forget to unscrew the mixer jet at regular intervals and remove any limescale residue or foreign bodies. It is recommended to replace the mixer jet with a new one if it is very dirty.
MAINTENANCE
- Please note that a cartridge is a worn part. If the water is very hard or dirty, you may need to replace it every 1-2 years (see page 15).
- Check all connections at regular intervals for leakage or visible damage.
- In the event of leakage or visible damage to the faucet or connection hoses, these should be checked or replaced immediately by an expert.
- You can purchase a new cartridge from the service center indicated.
PULL-OUT DISH RINSER, DOUBLE ADJUSTABLE
Normal jet
REPLACING THE MIXER NOZZLES
- Undo the mixer nozzle housing
- 1 using a mixer nozzle wrench.
- Remove the mixer nozzle insert 2.
- Remove the gasket 3.
- Replace the mixer nozzle 2.
- Subsequently put the individual parts together again.
SETTING THE HOT LIMIT RING
- Turn off the water supply.
- Remove the hot/cold badge 1.
- Undo the screw 2 in the lever 3 using an Allen wrench.
- Pull off the lever 3.
- Remove the attachment ring 4.
- Undo the cartridge ring 5 using a wrench.
- Remove the cartridge 6 .
- Remove the hot limit ring 7 and insert it again according to the diagram on the right.
- Subsequently put the individual parts together again.
REPLACING THE CARTRIDGE
- Turn off the water supply.
- Remove the hot/cold badge 1.
- Undo the screw 2 in the lever 3 using an Allen wrench.
- Pull off the lever 3 .
- Remove the attachment ring 4 .
- Remove the cartridge ring 5 using a wrench.
- Remove the cartridge 6 and replace it.
- Subsequently put the individual parts together again.
DECOMMISSIONING
- Cut off the water supply before dismantling the product.
- Pay attention to escaping residual water.
- Disassemble the product in the reverse order of the assembly instructions.
DISPOSAL
Your kitchen faucet is delivered in solid packaging, in order to protect it
against transport damage. The packaging consists of recyclable materials.
Dispose of it in an environmentally suitable manner.
Do not throw the product into the normal domestic waste at the end of its
service life, but ask your municipal administration about the possibility of
an environmentally friendly disposal.
The illustrations are to be considered as figurative representations,
deviations of the product are possible. Subject to technical modifications.
Warranty conditions
GENERAL
The company W. Kirchhoff GmbH, Hullerweg 1, 49134 Wallenhorst (hereinafter
referred to as “Kirchhoff”) voluntarily provides a warranty to consumers for
faucets in accordance with the following terms and conditions in addition to
the statutory warranty to which the consumer is entitled with regard to his
seller. This warranty shall not restrict the consumer’s statutory warranty
rights and can be claimed by the consumer free of charge. The warranty
declaration of Kirchhoff is not a waiver, restriction or other modification of
the contractual or statutory rights of the consumer in respect of defects.
The “consumer” in this context means any natural person who is the owner of
the product and who does not resell or install it for the purpose of resale or
in the course of his or her legal or independent professional activity.
SCOPE OF WARRANTY
Kirchhoff guarantees its customers, insofar as they are consumers, perfect
material quality and material processing in accordance with the respective
purpose, as well as professional assembly, tightness and perfect functioning
of the product.
The warranty applies to initial purchases within the European Economic Area.
The initial purchaser is the consumer who first acquires the product for use.
A prerequisite for the intervention of this warranty declaration is first of
all professional installation and maintenance in accordance with the operating
and assembly instructions as well as the recognized rules of technology, and
compliance with the operating and care specifications of the product during
further use.
Excluded from the warranty
- Cartridges, valves
- Damage due to improper assembly, commissioning and handling
- Damage due to use of incompatible spare parts
- Damage due to external influ-ences such as fire, water, abnormal environmental conditions
- mechanical damage due to accident, fall or impact
- negligent or wilful destruction
- normal wear and tear or damage due to lack of maintenance
- Damage as a result of repairs carried out by unqualified per-sons
- Damage due to failure to observe the care instructions, e.g. improper treatment, insufficient care, or use of unsuitable cleaning agents
- chemical or mechanical influ-ences during transport, storage, connection, repair and use of the faucet
WARRANTY
The warranty service for the professional rectification of the defect relates,
at our discretion, to the repair free of charge, the delivery of spare parts
free of charge or an equivalent faucet in return for the return of the
defective part or the defective faucet. If the type in question is no longer
manufactured, we reserve the right, at our own discretion, to supply a
replacement faucet from our range that is as close as possible to the returned
type. Replaced faucets or parts thereof shall become our property.
Reimbursement of expenses for removal and installation, inspection, claims for
loss of profit and damages are excluded from the warranty, as are further
claims for damage and loss of any kind caused by the faucet or its use.
Kirchhoff shall only be liable to end customers for damages or reimbursement
of expenses on the basis of mandatory statutory regulations. Should the
customer nevertheless wish to have a repair carried out after being informed
that the warranty does not apply, he shall bear the additional costs incurred
for this.
ENFORCEMENT OF THE WARRANTY CLAIM
A prerequisite for the assertion
of the warranty is that a warranty case exists. This is the case if the
product is proven to not be free from material, manufacturing, construction,
or functional defects. The warranty claim must be made in text form to
Kirchhoff within the warranty period by submitting the original purchase
receipt showing the date of pur-chase. If it is necessary to send in the
faucet in order to check the warranty claim, the purchaser shall bear the
transport costs and the transport risk. The warranty claim can only be made
for the country in which the product was purchased.
WARRANTY PERIOD
Our warranty is valid for ten (10) years from the date of purchase by the end
customer. The date on the original purchase receipt is decisive. Warranty
service does not extend or renew the warranty period for the product.
MISCELLANEOUS
This warranty is governed by German law to the exclusion of the United Nations
Convention on Contracts for the International Sale of Goods (CISG).
SERVICE ADDRESS
- W. Kirchhoff GmbH
- Hullerweg 1
- 49134 Wallenhorst
Germany
-
Fon: +49 (0) 54 07 / 81 52 – 902 Fax: +49 (0) 54 07 / 87 07 – 777
Web: www.wasserwerk.de -
Mail: info@wasserwerk.de
VOOR MEER INFORMATIE
NACHHALTIGES PAPIER
- energie- und wassersparend hergestellt
- aus 100% Altpapier
- besonders schadstoffarm
SUSTAINABLE PAPER
- produced in an energy and
- watersaving way
- from 100% recovered paper
- particularly low-pollutan
Reprinting or reproduction (also inextracts) only with approval of:
- W. Kirchhoff GmbH
- Hullerweg 1
- 49134 Wallenhorst
Germany
2023/2024
This publication, including all its parts, is protected by copyright. Any use
outside of the restrictive limits of copyright law without the permission of
W. Kirchhoff GmbH is inadmissible and liable to prosecution. This applies in
particular to reproductions, translations, microfilming and the input and
processing in electronic systems.
- W. Kirchhoff GmbH
- Hullerweg 1
- 49134 Wallenhorst
- Germany
WK7
77mit herausziehbarer Geschirrbrause
with pull-out dish rinser | con rociador extensible para vajilla avec
douchette extractible | met uittrekbare vaatdouche
SCHNELLINSTALLATION
QUICK INSTALLATION
10955015-01_MA-WK7_SPGB_1222.indd 28
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>