ELECAN DC-656 Smallest Bark Collar User Manual
- May 15, 2024
- ELECAN
Table of Contents
ELECAN DC-656 Smallest Bark Collar
DEVICE OVERVIEW
IMPORTANT!
To turn ON/OFF the collar, press the button for 3 seconds still until the collar beeps and the indicator lights up.
THE FIRST USAGE
For the collar to start working:
- To charge collar 1.5-2 hours.
- Turn on the collar before use. Press the button and hold for 3 seconds. The collar will beep, and the indicator will turn green.
- Set the collar’s sensitivity to position 4. Press the button a short while until the collar ceases to emit a signal when the button is pressed. It will be the mode of the lowest sensitivity of the collar. Then press the button. three times, which will be mode 4.
- Each time you press the button, the collar will sound like a beep, so you know that the mode has switched. Adjust the sensitivity if necessary.
- Each time you press the button, the collar will sound like a beep, so you know that the mode has switched. Adjust the sensitivity if necessary.
How to put a collar on a dog:
- Check whether the collar fits tightly or not. If necessary, adjust it. You must cut the excess strap.
- Install the collar block in the middle of the strap. Note that the collar block moves along the strap as you pull on it.
- You must put the collar on the dog so the block is in the center of the throat. The collar reacts to the vibration of the throat when the dog barks.
IMPORTANT!
Read on for more details and features in the Product Manual!
Documents / Resources
|
ELECAN DC-656 Smallest Bark
Collar
[pdf] User Manual
DC-656 Smallest Bark Collar, DC-656, Smallest Bark Collar, Bark Collar, Collar
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>