TICONN Deadbolt Door Handle Set Installation Guide
- June 15, 2024
- TICONN
Table of Contents
Deadbolt Door Handle Set
TICONNR HEAVY DUTY DEADBOLT INSTALLATION INSTRUCTION
PARTS LIST AND ASSEMBLY DRAWING
TOOLS REQUIRED FOR NEW INSTALLATION
-
2 Phillips screwdriver
- Circular saw 54mm (2 1/8″) diameter
- Chisel (or router)
- Circular saw 26mm (1″) diameter
- Hammer (if use chisel)
- Drill
LATCH CONFIGURATION
Rotate to adjust length of the latch to 60mm or 70mm depending on the required distance from the edge of the door to the axis of the latch.
TICONNR HEAVY DUTY DEADBOLT INSTALLATION INSTRUCTION
NEW INSTALLATION STEPS
Step 1: For doors without handle hole, mark and drill by the template provided.
Step 2 : Insert latch to mark the rectangle shape of front plate. Then use chisel or router to remove 3mm (approx. 1/8″) deep on the edge of door.
Step 3: Assemble the door handle with latch.
Step 4: Place strike plate on the door frame to mark shape of it. A router is recommended to remove 1mm deep of material on the door frame for strike plate only installation. If planning to use plastic shell to cover rough cutting, please remove 2mm deep of material on the door frame.
DRILLING TEMPLATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>