Igland 42 PTO Forestry Winch Owner’s Manual
- May 15, 2024
- IGLAND
Table of Contents
Igland 42 / 52
Owner’s manual Igland 42
IG308020
Igland 52
IG300720
42 PTO Forestry Winch
Revised: 07.12.2022
Issued: AIB 07.12.2022
P/N: IG390417
| Address | Doneheia 17, 4516 Mandal |
|---|---|
| Website | nosted.com/en/igland |
| corporate@igland-as.com | |
| Phone | +47 37 25 62 00 |
| Fax | +47 37 25 62 01 |
Find more information on our website
Reproduction of text or illustrations without permission is prohibited
| Optional equipment | Product No. |
|---|---|
| (42) Radio remote control, 1 function, incl. hydraulic LH | IG095450 |
| (52) Radio remote control, 1 function, incl. hydraulic LH | IG095460 |
| RPM control of tractor, on/off (only available together with radio) | IG091442 |
| Top pulley for spooling point | IG143160 |
| Adapter for Lyng Triangel (A-frame) | IG143210 |
| Adapter for HMV | IG143170 |
| Oil distribution valve for tractor with oil capacity exceeding 55 l/min |
IG090378
Top grid height / width – 78 / 90 cm| IG159337
Oil can holder| IG022150
Chainsaw holder| IG022151
Main components
Technical specifications
Igland 42
General specifications
| Number of drums | 1 |
|---|---|
| Height /width / depth | 131 / 144 / 46 cm |
| Weight (without steel rope) | 226 kg |
| Gear ratio | 01:05.2 |
| Clutch | Interchangeable friction pads |
| Brake | Ratchet brake |
| Attachment type | 3-point hitch (standard) |
| PTO input, distance from ground | 52 cm |
Important limitations
| Tractor size | 30 – 52 kW (40 – 70 hk) |
|---|---|
| Max traction (empty drum) | 42 kN (4.2 tonne) |
| Max traction (full drum) | 15 kN |
| Wire rope, theoretical capacity | 77 m, 10 mm |
| Recommended steel rope length | 50 m, 10 mm |
| Recommended max total load | 3.4 m³ |
| Recommended max in-haul load | 1.4 m³ |
| Winching speed at 540 rpm | 0.67 – 1.71 m/s |
Igland 52
General specifications
| Number of drums | 1 |
|---|---|
| Height /width / depth | 152 / 170 / 53 cm |
| Weight (without steel rope) | 285 kg |
| Gear ratio | 1:06 |
| Clutch | Replaceable friction pads |
| Brake | Ratchet brake |
| Attachment type | 3-point hitch (standard) |
| PTO input, distance from ground | 57 cm |
Important limitations
| Tractor size | 45 – 67 kW (60 – 90 hk) |
|---|---|
| Max traction (empty drum) | 52 kN (5.2 tonne) |
| Max traction (full drum) | 20 kN |
| Wire rope, theoretical capacity | 83 m, 11 mm |
| Recommended steel rope length | 50 m, 11 mm |
| Recommended max total load | 3.8 m³ |
| Recommended max in-haul load | 1.8 m³ |
| Winching speed at 540 rpm | 0.63 – 1.62 m/s |
Follow appropriate safety rules helps to manage risks and minimize the chance
of accidents. The winch must only be used for its intended purpose. Read the
instructions carefully.
Before use
Before using the winch, check for visual damage. Any damaged components must
be replaced and operation should be halted immediately if any safety hazard
becomes apparent.
Checklist
- Clear visibility over work area
- All guards and components are in order
- Cracks and other damage that could affect operations must be repaired immediately
- Inspect hydraulic hoses and connections for leaks (optional equipment)
- Lubricate the machine per the schedule outline as recommended by the manufacturer
- Check for any wire movement when control levers are in top position
- Check remote controls for correct response (optional equipment)
- Ensure that moving parts are not obstructed by debris.
Assembly
Attach the support legs and make sure the winch is on a level surface.
Mounting winch on tractor
Choose appropriate hitch pins for linkage.
| Category I | 42 | 52 |
|---|---|---|
| II | X | X |
| III | X | X |
| X |
Attach lower links.
Attach top link.
Use attachment holes that give the smallest angle between top link and winch.
Adjust length of top link to give winch 10” – 20” backward tilt in operating
position.
Ensure the winch does not collide with cab when being raised.
Instructions
Cut shaft and guard to correct length before mounting. Correct length is full
length of PTO minus 20 mm.
Follow manufacturer’s instructions for cutting PTO shaft and guard to length.
Attach rope for releasing brake
Thread the rope through the hook on top of the winch, and connect it to the
lever below.
Attach rope for clutch
Thread the rope through the small pulley on the frame, then through the pulley
on the large lever above it. Attach it to the hook just above the first
pulley.
Attach wire rope
Thread the wire rope through the large pulley.
Attach it through the hole in the drum with a wire clamp.
Keep the wire rope tensioned while hauling in.
Hydraulic connection (optional equipment) Connect the pressure hose (ISO/red
cap) to one of the tractor’s outputs. Connect the return hose (open
connector/blue cap) to the oil tank or a return line on the tractor.
The return line must be without any resistance.
Radio connection
Connect the 7-pole connector to the tractor, and connect the 3-pole connector
to the solenoid valve.
Maintenance
Set PTO in neutral and stop engine before doing any maintenance. Check PTO
manufacturer’s product instructions for maintenance.
Lubrication
Do not spill oil on the clutch.
| Hours of use
---|---
Chain| 20
Needle bearing| 20
To access chain and needle bearing, remove top cover.
Clutch inspection
Check control lever play.
Normal lever play is between 5-10 cm.
Clutch adjustment
Reel out cable about 3 meters. Remove top cover and adjust clutch. Verify by
checking control lever play again before re-attaching the top plate.
Drive chain
Check drive chain tension. Take up excessive slack. Fit joining link with
closed end in direction of travel. Make sure to tighten chain tensioner after
first day of use.
Renewing clutch friction pads
Reel out cable about 3 meters. Remove top cover. Measure clutch friction pad
thickness.
If less than 2 mm, replace pads.
Replacing clutch friction pads
Loosen the clutch adjustment nut. Detach old clutch friction pads with two
screws, and attach new ones. Inspect and adjust the clutch according to
maintenance manual.
Pressure adjustment
Adjust the pressure by loosening the nut and turning the relief valve.
The pressure must be 40 bar.
Logging operations
Back tractor as close as possible to logs.
Do not haul in from the sides further than 30 degrees on each side of the
tractor, at a maximum of 60 degrees.
Small logs may be hitched in a herringbone pattern, beginning at the end of
the cable.
Avoid sharp angles between each log.
Avoid quick movements as your load may have a delayed reaction.
Choke logs up to 30 cm from their edges.
Maximum 10 cm of excessive chain between the glider and hook.
Operating instructions
Be aware of your winch’s capacity limitations.
Tighten the friction brake if the drum spins.
Slacken if the wire rope is too heavy to pull out.
Release load slowly to prevent snarls.
Lower butt plate until it’s resting on the ground and apply the brakes to park
the tractor.
See radio manual for further instructions.
Safety precautions
To be used only by qualified personnel
Do not use winch in operations for which it was not designed.
Keep a safe distance from hauling area, and children away from the winch and
tractor.
Use only cables of suitable strength. Avoid damage to the cable. Replace if
you see any visual damage.
Avoid jerks and tugs when reeling the cable, and avoid contact with the cable
during movement.
Apply ratchet brake before hauling up-hill.
Store winch and equipment in a dry area.
Place winch on a level and stable surface when put in storage.
Nøsted & AS
Jåbekk
Doneheia 17
4516 Mandal
Norway
www.nosted.com
Documents / Resources
|
IGLAND Igland 42 PTO Forestry
Winch
[pdf] Owner's Manual
Igland 42 PTO Forestry Winch, Igland 42, PTO Forestry Winch, Forestry Winch,
Winch
---|---
References
- AS USA Latino - Diario online de deportes. Fútbol, NFL, MLB, motor, boxeo y más
- IGLAND | Nosted
- IGLAND | Nosted
- Nøsted & - Alt handler om koblinger | Nosted
- Nøsted & - Alt handler om koblinger | Nosted
- IGLAND | Nosted
- igland-52-vinsj | Nosted
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>