TELEPHONE 2SVSK1989 Wireless Speaker with Colorful Light User Manual
- June 11, 2024
- TELEPHONE
Table of Contents
Wireless speaker with colorful light
Model number: 2SVSK1989
User Manual
Products Specifications:
Out Power: 3W
Charge voltage: 5V
Speaker: Φ52 4Ω 3W
Package Contents
1Speaker
1USB charging cable
1AUX input cable
1User manual
Product Description
Thank you for choosing this colorful ambient light Bluetooth stereo speaker
created by our company.
This product uses performance anti-riot sound amplifier chip and with ultra
low power consumption. Buttons can control a variety of colorful magic lights.
Products Features
- Diamond cutting process unique shape
- Seven colorful magic lights
- Support TF Card, with mp3 format decode function
- Built-in high quality Lithium battery.
- With Line in AUX mode
Product Operations
Power on: turn the “ON/OFF” key to “ON” position. The light will be on with
voice prompt “Power On. Bluetooth Mode”. Use your phone or other Bluetooth
device to search ” SKY&VI GALAXY” to match. When connected successful, you can
hear the voice prompt ” Bluetooth Device Connected”. Then it can play the
music in your phone or other Bluetooth device. The system will be default the
last Bluetooth device automatically when it is turned on next time.
If can not be connected in 5 seconds, it will enter waiting Bluetooth connect
status again.
Power off: turn the “ON/OFF” key to “OFF” position.
Key operation
- Press the “+ ” button: When playing music, press once to play the music, long press to increase the volume.
- Press the “- ” button: When playing music, press once is the next song, long press will reduce the volume.
- Press the “play/pause ” key: While playing music, press once to pause.
- Key ” ” Short press conversion light effect
MUSIC MODE
When turned on (without TF card), the system will automatically enter
Bluetooth mode. If with TF card inserted, the system will be changed to TF
card play mode (the voice prompt “TF Card Mode” in the same time)
AUDIO INPUT MODE
When the speaker turned on, put the audio cable into the AUX audio hole. And
the other end of the cable plugged into a player or desktop computer. The
speaker will automatically switch to the audio line input mode and you can
play music.
BATTERY CHARGE AND AUDIO INPUT CONNECT DIAGRAM
How to charge
When the battery is in low power. Every 60 seconds there will be “Battery Low”
prompt to remind you to charge it.
This product is with over charging protection circuit. It can be connected
with the PC or power supply for long time to work. When charging, the
indicator light will be red. When fully charged, the indicator will be off.
The full charging time need 5 hours.
Warning
Please read this instruction and check the attachments before using.
To avoid damage, please do not open or pinch the product to avoid damage.
Do not use the product near any heat source such as fire, stove, heater, etc.
Do not put the product in water or other liquid. If the product is not used
for a long time, for best protection, please put it to cool, dry environment
and charge it every month.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>