SANON WR08 Wireless Charger Night Light User Manual
- May 15, 2024
- SANON
Table of Contents
WR 08
WIRELESS CHARGER
NIGHT LIGHT
PRODUCT MANUAL
WIRELESS
CHARGING
Product Parmeters
| Model | WRO8 | Wireless Charging | lOW |
|---|---|---|---|
| Material | Wood + Aluminum | CCT | 6000k-4500k-3000k |
| Dimmer Way | Touch Control | USB Output | 5V/1A |
| Lumen | 2701m | Color | Burlywood+White |
| Size(mm) | L300*W80-1-1160 | Input Voltage | Type-C 9V2A |
| Accessories | Product Manual / Type-C Power Cable |
Lamplight Adjust
Three color temperatures are available, and the light can be adjusted by
touching any position of the light arm:
Click: On and Switch Cool White Light Natural Light → Warm White light → Off
and cycle accordingly.
Long Press: Steplessly increase or decrease the brightness of the light.
10W Wireless Charging
After the power is connected, wireless charging can be used normally, and the
phone supporting wireless charging can be charged by placing it in the
wireless charging area.
If the phone does not have wireless charging function, you can buy the
wireless charging induction board suitable for your phone model to charge.
USB Charging Port
When the light is connected to the power supply, the USB output port can
charge your phone, tablet or other devices.
Clock Display
This table lamp with clock function, more convenient to get the time
information.
1. Clock Brightness Adjustment:
In the normal clock display mode, single press “up” button switch the clock
brightness (100%-70%-30%-OFF)
2. Reset settings and 12/24 hour switch:
- Long press “up” button for 5 secdisplay 88:88—wait for 3 sec>complete the reset setting
- Single press “down” button—switch 24 hour/12 hour
24 hour mode—display 0:00
12 hour mode—display 12:00
3. Clock Setting:
- Press and hold “down” button for 5 sec enter the clock setting mode {clock flickers)
- Single press “down” buttonenter minute setting (minute flickers)
- Single or long press the “up” button minute digital adjustment
- Single press “down” button—enter hour setting (hour flickers)
- Single or long press the “up” button>hour digital adjustment
- Single press “down” button—exit clock setting
Cautions
- If the phone is equipped with a protective case made of metal on the back, it cannot be charged wirelessly and must be disassembled for use.
- Charging problems: Please adjust the device to the appropriate position of the charging board.
- Please place it in a cool and dry indoor place with no direct sunlight at a temperature between 0-45°C.