HURKEYE A13 Bluetooth Headphones Neckband Instructions
- May 15, 2024
- HURKEYE
Table of Contents
HURKEYE A13 Bluetooth Headphones Neckband
Know headphone
Product parameters
- Version: V5.0
- Use Time: -1 00
- hours Distance: 10-20 m(Barrier-free line)
- Working Voltage: 3.4~4.2V
- Impedance Ohmic Value: 32 0
- Speaker: ¢1 0mm/6 mm*2
- Battery Capacity 1000 mAh
- Charging Time: ~ 1 .5 hours
- Charging Input: 5V-500 mah
- Working Current: 10~20mAh
- Frequency 2.4- 2 480GHZ
- StandbyTime: ~365 day
Indicator description
- Power on: Blue light f1ashes
- Pairing: Red and blue lights flash alternately
- Work: Do not flash after connection.
- Charging: Indicator 1 234 flashes in sequence
The four battery indicator lights represent the remaining percentage of the headset:
- One grid 0-25% electricity.
- Two grid 25-50% electricity.
- Three grid 50-75% electricity.
- Four grid 75-100% electricity.
- Fully charged: the indicator light is long on.
- Shutdown: red light flashes 3 times.
Bluetooth pairing
- When the headset is off, long press the Switch button.Until the headset Bluetooth function turns on successfully The prompt.At this time, the headphone indicator light appears blue red light tlashing alternately
- Open the Bluetooth device to search the headset model “Al 3”, and click the headset model Pairing. When the pairing is successful, there will be a prompt sound. After the connection is successful, there will be no flashing light.
- In the power on state, if the headset is not connected for 5 minutes, it will automatically shut down
Connect two mobile phones at the same time
- Complete the pairing connection of the first cell phone according to the above Bluetooth pairing operation, and then turn off the first cell phone Bluetooth in a mobile phone.
- Complete the matching of the second mobile phone in the same way.
A mobile phone Bluetooth function is turned on and click on the A 13 device connection again.
The keys operation
-
Boot———- long-press the Switch button for 2 seconds
-
Shutdown———- long-press the Switch button for 3 seconds
-
Answer the call—— press the function button When the call came
-
Hang up the phone—— press the function button during the call
-
Refuse to listen to the phone—— Hold the function button for 1 second
When the call came -
Play pause—— Press the function button when you listen to the song
-
Previous song ——When listening to the song, press 1 second+ The keys
-
Next song—– When listening to the song, press 1 second – The keys
-
Increase the volume—— press+ button during work
-
Decrease the volume—— press the – button while working
-
Tail number redial—— press the function key twice while working
-
Call Siri— Long press the C key for 1 second after connection
-
Game/music mode toggle — click C while working
-
Sound switch — double click C key while working
-
Power prompt — click the switch button and the power display light will be on for 5~20 seconds and then go off
(Display time varies in different modes)
Warranty description
Warranty period
12 months from the date of purchase.
Free Service:
In the warranty period, if the product quality of the fault, please use this
manual and shopping vouchers to contact the dealer to enjoy free maintenance
The following conditions are not subject to warranty:
- The product maintenance label has been damaged;
- Damage caused by self- dismantling;
- Faults caused by water ingress or fall and considered to be mechanical damage;
- Malfunctioning or damaged by force majeure.
Note:
- Long-term use of headphones may cause hearing damage, please use reasonable time.
- Working hours and charging time are affected by playing environment, volume, audio source and other conditions And change
This product has been inspected by our quality control department and its performance parameters are in line with the technical standards
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>