YOSE POWER L200 User Manual

L200 User Manual

Product Description and Specifications

Parts Description

Display Dimensions

Functions Introduction

Features
L200 supports the common riding parameters and statistical results, as well as some useful functions:

• Real-time speed, Max speed, Average speed
• Real-time motor power
• Battery indicator
• Assistant level
• Odometer, trip
• Trip time
• Calorie burnt
• Light indicator
• Metric(km/h)/Imperial(mph) switching
• Error codes indicator
• Brightness adjustment
• Auto Power-off

In addition, the Bluetooth version also supports the following functions:

• APP connection
• Data synchronization
• Riding ranking
• Riding track recording

Buttons Functions

2. Setting confirmation
[+]| [+]| 1. Parameter adjustment
2. Light turn on/off 3.Menu operation
[-]| [-]| 1. Parameter adjustment
2. Pedestrian mode on/off 3Menu operation

Operation

• Power on/off
  Long press the [Power] button to power on, the boot interface will be shown for about 2s, followed by the riding interface:
  In any interface, long press the [Power] button, the shutdown interface will be shown for about 2s before power off:

• Riding interface
  The speed ring is displayed according to the current speed and the speed limit value, and when the speed reaches the speed limit, the full ring is displayed.
  

• Assist level switch
  Click [+] or [-] to switch assist levels;
  Press and hold the [-] button to enter the pedestrian mode, and release it to exit.
  

• Turn on/off the light
  Long press the [+] button to turn on/off the light.
  

• Clear trip data
  Long press [Power] & [+] button to clear trip data.
  [Note] The trip time, max speed, average speed, and calories burnt will be also cleared by this operation.

• Error Code
  Common error codes are as follows (Only for reference, depending on other electrical parts of the ebike):
  

KM5S protocol Error Code

Li2 protocol Error Code

User Menu

To enter the user menu, please long press the [+] & [-] combination buttons for 1s on the riding interface when static.
This interface will automatically return to the riding interface when there is no operation for more than 60s.

1. Wheel Size
   In this interface, a prompt of “SIZE” appears at the bottom right and the wheel size value in the data area flashes. Click the [+] / [-] button to adjust wheel size (inch), click the [Power] button to confirm and go to the next menu interface.
   

2. Speed Unit
   In this interface, a prompt of “UNIT” appears at the bottom right, click the [+] / [-] button to switch the speed unit, click the [Power] button to confirm, and go to the next menu interface.
   

3. Speed Limit
   In this interface, a prompt of “SPEED” appears at the bottom right, click the [+] / [-] button to adjust the speed limit value, click the [Power] button to confirm, and go to
   the next menu interface.
   

4. Auto Power Off
   In this interface, a prompt of “OFF” appears at the bottom right, click the [+] / [-] button to adjust the value of auto power off, the adjustment range is 0-99 (unit: min), 0=Never auto power-off, click the [Power] button to confirm and go to the next menu interface.
   

5. Reset
   In this interface, a prompt of “RESET” appears at the bottom right, and the data area flashes to display ‘y‘ or ‘n’:
   Click the [+] / [-] button to switch ‘y’ or ‘n’, click the [Power] button to confirm, and go to the next menu interface.
   

6. Bluetooth Connection (Bluetooth version only)
   In this interface, a prompt of “BLE” appears at the bottom right, and the numerical display area flashes “n”, which means that the Bluetooth is not connected.
   You can search and connect on the APP side. After the operation is successful, the interface displays “y” and stops flashing. Click the [Power] button to confirm and go to the next menu interface.
   

7. Backlight Brightness
   In this interface, the display area flashes to display the current backlight brightness, you can click the [+] / [-] button to adjust, the adjustment range is 1-5, click the [Power] button to confirm, and go to the next menu interface.
   

Attention

1. Be sure to power off first before connecting and disconnecting the cable, or the display will be totally damaged;
2. When fixing the display to the bike, please ensure that the torque of the screwdriver is about 0.5N.M (DO NOT EXCEED 0.6N.M), or it will cause damage to the handle;
3. Do not put the display into water;
4. The display can be wiped with a wet and soft cloth, but DO NOT use any chemical liquid or spray on the display;
5. Please abide by local laws and regulations when scrapping, discarding or recycling in an environmentally friendly way, and do not discard the instrument or any accessories as resident waste;
6. The damage and failure of the instrument caused by improper installation or use are not covered by the after-sale warranty.
7. For more information and support, please contact service@yosepower.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>