TEHILA 16308 Black Vanity Cabinet and White Utility Sink Installation Guide
- May 15, 2024
- TEHILA
Table of Contents
INSTALLATION INSTRUCTIONS
16308 Black Vanity Cabinet and White Utility Sink
INCLUDED HARDWARE
| BOLT M6 | 16 (qty) | SCREW M4X15 | 24 (qty) | ||
|---|---|---|---|---|---|
| BOLT M4 | 4 (qty) | METAL HANDLE | 2 (qty) | ||
| ALLEN KEY M4 | 1 (qty) | CONCEALED HINGE-SOLF CLOSE | 4 (qty) | ||
| SCREW M4X20 | 16 (qty) | WASHER M6X014 | 4 (qty) |
-
Tighten the back pieces to the side panel as shown with the M6 bolts and hex/allen wrench.
-
Tighten down the bottom of the vanity with the M6 bolts.
-
Connect the other side panel and tighten down with M6 bolts.
-
Tighten down the front pane! with M6 bolts.
-
Flip the vanity over and attach each foot with 4 M4X20 screws.
-
Flip the vanity upright. Insert the Hinges into the premade sockets.
Attach with 6 M4X15 screws.
-
Install the handles with M4 Bolts and washers.
Use the examples to adjust the doors to your liking
TEHILALAUNDRY.COM
support@tehilalaundry.com
We reserve the right to make revisions in
the design and information without notice
Image is for reference only, styles varies by models
SKU Numbers: O40/5KDB
D 16308
Rey OD 0243
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>