TEHILA PIIJS6502 Utility Sink Instruction Manual

TEHILA PIIJS6502 Utility Sink

Product Information

Specifications

• Model: PIIJS6502
• SKU Numbers: 040JS6502, 040JS6502BLK, 040JS6502BLUE, 040JS6502GRY, 040JS6502WT, 040JS6502RD, 040US6502, 040US6502BLK, 040US6502BLUE, 040US6502GRY, 040US6502WT, 040US6502RD

Frequently Asked Questions

• Q: Can I use abrasive cleaners on the thermoplastic sink?
  • A: No, only use soap or qualified non-abrasive surface cleaners to avoid damaging the sink.
• Q: What should I do if I encounter issues during installation?
  • A: Contact us at 1 773-265-2371 or via email at [email protected] for assistance before returning the unit to the place of purchase.

ATTENTION

1. PRIOR TO INSTALLATION: Check all parts carefully to ensure no damage occurred in transit and no pieces are missing. DO NOT dispose of any packaging until you are satisfied with this product.
2. SAFETY PRECAUTIONS: Your installation must comply with all local plumbing codes. Have a qualified tradesman install or approve your plumbing installation. Always wear safety goggles and gloves during installation to avoid personal injury.
3. NEED HELP? Please call us at 1 773-265-2371 or contact us via email at [email protected] with any questions. Our normal business hours are Monday to Friday from 8 a.m. to 5 p.m. CST.

DO NOT RETURN THE UNIT TO THE PLACE OF PURCHASE BEFORE CONTACTING US AT 1 773-265-2371 OR VIA EMAIL AT [email protected].

CARE AND MAINTENANCE

FOR LAUNDRY TUB:

1. Only soap or qualified non-abrasive surface cleaner and water should be used for cleaning the thermoplastic sink. Rinse well and dry with soft cloth to prevent scratches.
2. Clean grease, oil, paint, and ink stains with isopropyl (rubbing) alcohol. Immediately rinse with water after stain removal.
3. Avoid using razor blades or other sharp instruments that may damage or scratch the surface.

WHAT’S INCLUDED

MATERIALS AND TOOLS NEEDED

• Phillips Screwdriver, Flat Screwdriver, Silicone, Carpenters Level, Pliers, Pipe Wrench, Plumbers Putty, Hacksaw, Utility Knife.

WHAT’S INCLUDED IN THE BOX

INSTALLATION INSTRUCTIONS

STEP 1: HOW TO PUNCH OUT FAUCET HOLES & INSTALL STEEL LEGS

1. Place the laundry tub on a clean surface, such as a blanket or carboard, and turn the tub upside down to allow for the removal of the pre-formed knockouts. These will accommodate the faucet that is going to be installed. The hole plugs may be removed by a flathead screwdriver or a small chisel and a hammer (see Fig. 1).

2. While the tub is still upside down, insert the 4 steel legs into each corner socket (see Fig. 2).

3. Use a hammer and a block of wood to drive each leg into the tapered socket until it is secure (see Fig. 3).
   CAUTION:

   • DO NOT strike the leg directly with the hammer. Place the block of wood against the leg, then strike the wood with the hammer.
   • DO NOT insert the leg all the way into the tapered socket. It’s okay if there is a gap between the tub and the corner of the steel leg. Verify that each leg is locked securely in place by gently tugging the leg.
   • DO NOT wiggle the leg back and forth, as this will loosen it from the tapered socket.

4. Mount leveler to each leg. Note that there are two holes in the bottom of the leg at different locations. Select the proper hole that will allow access to the screwhead after the tub is in the desired location. Attach leveler with ¼ in. (0.63 cm.) bolt and nut and hand tighten it. DO NOT over-tighten it in this step (see Fig. 4).

5. Gently turn the tub back to the correct position after the steel legs are installed.

6. Position the laundry tub in your desired location. To adjust the level of the tub, move the levelers up or down. Tighten the nuts after adjusting the levelers to the desired level. Holes on the bottom of levelers are included for mounting the tub to the floor if desired (anchors not furnished).

IMPORTANT

• When installed correctly and the leg is secure, there WILL be a slight gap in the corner between the top of each leg and the bottom of the tub (image A).
• Do NOT attempt to insert and force past this gap to make them flush. This WILL crack the tub (image B).

STEP 2: INSTALLING THE PLASTIC DRAINAGE

NOTE

• When installing new plastic drainage, loosely tighten all pieces first to make sure of proper fit, then make final connections.

STEP BY STEP (see Fig. 5):

1. Slide Slip Nut 3 threads up onto the Tail-Piece 2, and insert Flanged Washer 1 in top of Flanged Tail-Piece 2.
2. Tighten the top Tail-Piece 2 to the Sink Strainer with Slip Nut 3.
3. Insert Slip Nut 3 threads down and Washer 4 in bottom end of the Tail-Piece 2.
4. Insert Slip Nut 2 threads down onto Wall Tube 5, then insert Slip Nut and Washer (not provided) onto other end of Wall Tube 5.
5. Place flanged end of Wall Tube 5 into lower portion of J-Bend 6 and tighten with Slip Nut 3. If wall connection is standard 1 ½ in. threaded pipe, install wall tube directly into pipe and tighten Slip Nut and Washer (not provided).
   • NOTE: If wall connection is to 1½ in. plastic pipe, a Conversion Adapter, purchased separately, will be required for proper installation (see Fig. 6).
6. Swing J-Bend 6 to align with bottom of flanged Tail-Piece 2. Connect J-Bend 6 to Tail-Piece 2 and tighten it with Slip Nut 3. If tail-piece is too long, a hacksaw or tubing cutter may be used to trim away excess material.

LIMITED WARRANTY INFORMATION

1-YEAR LIMITED WARRANTY INFORMATION

TEHILA® products are backed by a 1-year limited warranty. TEHILA warrants that its products will be free from defects in material and workmanship for a period of 1 year from the date of purchase. Proof of purchaser’s receipt is required to receive this warranty. A replacement for any defective part will be supplied free of charge for installation by you. This 1-year warranty covers the original consumer purchaser only and DOES NOT INCLUDE BUSINESS, COMMERCIAL, OR INDUSTRIAL USE OF THIS PRODUCT. This warranty shall not apply to goods which have been subject to accidents, negligence, installation error, product abuse, or misuse.

In no event will TEHILA be liable for any consequential, indirect, or special damages, nor shall TEHILA be liable for transportation, labor, or other charges arising out of the removal or reinstallation of its products. Defective parts must be made available for inspection by a TEHILA employee or an authorized representative. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

WARRANTY CLAIM PROCEDURES AND REQUIREMENTS

To obtain TEHILA® warranty service, the customer will need to write to TEHILA explaining the defect, and include proof of purchase receipt, your name, phone number, email address, and mailing address. Information can be emailed to [email protected] or mailed to TEHILA® (Warranty Department), 990 E North Ave., Glendale Heights, IL 60148.

• TEHILALAUNDRY.COM
• [email protected]

We reserve the right to make revisions in the design and information without notice
Image is for reference only, styles varies by models

SKU Numbers: 040JS6502, 040JS6502BLK, 040JS6502BLUE, 040JS6502GRY, 040JS6502WT, 040JS6502RD, 040US6502, 040US6502BLK, 040US6502BLUE, 040US6502GRY, 040US6502WT, 040US6502RD

References

• American Express

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>