Sterno 6019924 Rechargeable Candle Smart Fan Light Canopy Module User Manual

The Most Innovative Flameless Candle on the Market!

ALL-IN-ONE

RECHARGEABLE
FLAMELESS CANDLES

DEAR CUSTOMER,
Congratulations on your recent purchase of the Sterno® All-in-One Rechargeable Flameless Candles. Our products will help enhance the beauty of your surroundings and provide years of safe, practical, and economical candlelight. Sterno® offers a wide selection of products made with the highest professional quality and we hope you enjoy!

PRODUCT SUMMARY

• Candles must be FULLY charged in the charging tray before use.
• For charging multiple trays, see FIGURE 1.
• Please read through the instructions and/or scan the QR Code (right) to watch our video for proper usage.

SET UP VIDEO

COMPONENTS

(1)                                     (1) (12)
REMOTE      CHARGING TRAY    RECHARGEABLE CANDLES

(2)                                                 (1)
CHARGE                       POWER SUPPLY
BLOCKERS             (STARTER KITS ONLY)

Remove all components from protective packaging.

ALL-IN-ONE FLAMELESS CANDLES

Although candles might work immediately, it is recommended that they receive a FULL charge prior to initial use.

FIRST TIME USE

Press the “Hibernation Switch” shown to activate the candle If not planning to use for 2 months or longer, press hibernation switch to deactivate.

HIBERNATION SWITCH

EVERYDAY USE

To turn candles ON/OFF, use the remote control, the programmable timers, or the tilt function. DO NOT press the Hibernation Switch as this will deactivate the candle.

1. PROGRAMMABLE TIMERS
2. OFF
3. TILT FUNCTION

CHARGING A SINGLE TRAY OF RECHARGEABLE CANDLES

One Patented EasyStack Charging Tray can charge up to 12 candles simultaneously. Total charge time = 8 HRS.

STEP 1
Plug the power supply into the tray and then into a 120V outlet.

STEP 2
Turn candles OFF by using the remote control or tilt function and place in tray.

STEP 3
Press the charge button on the front of the tray.

STEP 4
The charge button will light up and the candles will flash while charging.

STEP 5
The charge button will go OFF and the candles will stop flashing when FULLY charged.

CANDLE CHARGING NOTE:

Charge button does not need to be pressed multiple times if not charging a full tray of candles at once.
Example:
Step 1: Charge less than 12 candles – press charge button – candles will blink while in charging mode.
Step 2: Add additional candles to charge – charge button does NOT need to be pressed again. Additional candles will blink indicating they are in charging mode.

CHARGING MULTIPLE TRAYS

When using more than 3 trays, use Charge Blockers as shown below.

FIGURE 1

1 TRAY

1. CHARGE BLOCKERS (ENLARGED)
2. TRAY 1
3. POWER SUPPLY

2 TO 3 TRAYS

1. TRAY 1
   CHARGE BLOCKERS OFF

2. TRAY 2
   CHARGE BLOCKERS ON

3. TRAY 1
   CHARGE BLOCKERS OFF

4. TRAY 2
   CHARGE BLOCKERS OFF

5. TRAY 3
   CHARGE BLOCKERS ON

6. POWER SUPPLY

4 OR MORE TRAYS

Charge Blockers MUST remain on the columns of Tray 3 to block the charge from overloading the Power Supply.

1. TRAY 1
   CHARGE BLOCKERS OFF

2. TRAY 2
   CHARGE BLOCKERS OFF

3. TRAY 3
   CHARGE BLOCKERS ON

4. TRAY 4
   CHARGE BLOCKERS OFF

5. POWER SUPPLY

ALL-IN-ONE FLAMELESS CANDLE REMOTE CONTROL

More detailed instructions can be found in the Remote Control Box.

1. 5HR Timer
2. ON
3. Warm Light
4. OFF
5. 10HR Timer
6. Steady Mode
7. Amber Light
8. Brightness Levels
9. White Light
10. Flicker Mode

• Use the ON and OFF buttons on the remote to turn the candle ON and OFF. Candles must be off when charging.

• Timer Mode: Turn the candles on (using remote control or tilt function) and choose desired setting (5HR/10HR).

• Mode: Flicker (candle will look like a real flame).
  Steady (candle will have a steady light).

• Color Options:
  White, Warm White, and Amber.

• Brightness Levels:
  Steady Mode — 5 Levels
  Flicker Mode — 2 Levels

IF CANDLE BATTERY DIES OR IS PLACED IN HIBERNATING MODE, ALL PROGRAMMING WILL BE LOST. REMOTE CAN ONLY BE USED WITH THE ALL-IN-ONE FLAMELESS CANDLES.

BATTERY REPLACEMENT

(1) Push tab down using pin-like tool (not included), while pulling out battery compartment.

(2) Remove the candle’s battery and replace with either a new CR2032 or a CR2025 3V Lithium battery in polarity as indicated.

(3) To close: Ensure remote is facing down and “+” sign on the battery and battery compartment is facing up.

NOTE:

• Using a soft dry cloth, clean the battery and its holder prior to battery installation. 
• If the candle does not respond to the remote control, it is recommended that the candle’s batteries be changed.

CAUTION

• Operate and store Charging Tray and Power Supply in a dry area. 
• In the event that the Charging Tray becomes wet, disconnect the unit from the power outlet immediately and quickly remove moisture with a soft, dry cloth. Allow the unit to dry completely before resuming use. 
• Rechargeable Candles can be used outdoors but should be operated in a dry area. 
• In the event that a candle becomes wet, remove moisture with a soft, dry cloth. Allow the candle to dry completely before resuming use or placing in the Charging Tray.
• Only the Sterno® Power Supply can be used with the Patented EasyStack Charging Tray.
• To avoid the risk of fire, do not light the wick of the Rechargeable Candles.
• Do not short circuit the contacts on the top or bottom of the Charging Tray (see Figure 2). 
• Candles contain Lithium Ion Batteries, recycle or dispose of batteries in accordance with local regulations.

FIGURE 2

1. WARNING
   DO NOT SHORT CIRCUIT THESE CONTACTS.

MAINTENANCE

• Clean the base of the candles and the tray with a soft, damp cloth and allow to dry completely. For additional problems and questions contact the Sterno® Customer Service department at 951-682-9600. 
• The Patented EasyStack Charging Tray is magnetized to easily transport the candles to their desired location.

TWELVE (12) MONTH LIMITED WARRANTY

This product is guaranteed to be free from defects in material and workmanship for twelve (12) months following the date of purchase (excluding the battery/batteries). Should a defect occur within the warranty period, please contact our customer service line at 951-682-9600. A proof of purchase (sales receipt) is required. Damage to any parts such as by accident, misuse, or improper installation is NOT covered by this warranty. Our policy does not include liability for incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from place to place.

FCC CAUTION

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

For replacement parts call: www.Sterno.com
951-682-9600 Y0264

WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer and cause birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

References

• P65Warnings.ca.gov
• Sterno Products - For the Food Service and Hospitality Professional

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>