TIDI 50004-PKG Aqua Guard Sheet User Guide
- May 15, 2024
- TIDI
Table of Contents
TIDI 50004-PKG Aqua Guard Sheet
Specifications
- Product Name: AquaGuard
- Model Number: IFU 44U00147
- Manufacturer: Tidi Products
- Website: www.tidiproducts.com
Product Usage Instructions
-
STEP 1: IMPORTANT!
-
STEP 2:
-
STEP 3:
- Prior to application, keep the skin dry and clear from oils and lotion. An alcohol wipe may be used to prepare skin for application.
- Fold back a small section of the paper strips exposing adhesive at corners. Be careful to avoid touching adhesive.
- Remove top strip and place adhesive on skin above intended site.
- Remove side strip and create a pleat by pinching the adhesive together in the middle. Smooth adhesive to skin. Pleating the sides creates a pocket so that the sheet is not tight against the coverage area.
-
STEP 4: Repeat on the other side.
-
STEP 5: Remove the bottom strip and place just
below the intended site, pleating if necessary. -
STEP 6: Apply pressure to all sides of the sheet to ensure a tight seal before entering the shower. The sheet should stay sealed to the skin while moving your body.
Frequently Asked Questions (FAQ)
- Q: Can AquaGuard be reused?
- A: No, AquaGuard is designed for single-use only to maintain proper hygiene and effectiveness.
- Q: How long can AquaGuard stay sealed to the skin?
A: AquaGuard should stay sealed to the skin securely while moving your body. It is recommended to follow the instructions provided for proper application.
QUICK START GUIDE
For complete instructions including contraindications and precautions, see AquaGuard IFU 44U00147 included with the product. IFU can also be found at www.tidiproducts.com.
-
STEP 1: IMPORTANT!
Prior to application, keep the skin dry and clear from oils and lotion. An alcohol wipe may be used to prepare skin for application. -
STEP 2:
Fold back a small section of the paper strips exposing adhesive at corners. Be careful to avoid touching adhesive. -
STEP 3:
-
STEP 4:
Remove side strip and create a “pleat” by pinching the adhesive together in the middle. Smooth adhesive to skin. Pleating the sides creates a “pocket” so that the sheet is not tight against the coverage area. -
STEP 5:
Remove the bottom strip and place it just below the intended site, pleating if necessary. -
STEP 6:
Apply pressure to all sides of the sheet to ensure a tight seal before entering the shower. The sheet should stay sealed to the skin while moving your body.
