AEG BSS18MTF12BL Brushless Cordless Impact Wrench Instruction Manual

BSS18MTF12BL
Original instructions

BSS18MTF12BL Brushless Cordless Impact Wrench

Picture section
with operating description and functional description
Text section with technical data, important safety and working hints and description of symbols

Remove the battery pack before starting any work on the product.

The “A” function is designed to give the user greater control in application and reduce damage to the fastener or work surface by automatically shutting the tool off after the tool senses the mechanism impacting for approximately one second.

kg
Recommended ambient operating temperature| -18…+50 ºC
Recommended battery types| L18…
Recommended charger| AL18G, BL1…
Noise Information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty
Sound power level / Uncertainty
Wear ear protection!| LpA=99,0 dB (A) / KpA=3 dB(A)
LWA=110,0 dB (A) / KWA=3 dB(A)
Vibration Information
Vibration total values (triaxial vector sum) determined according to EN 62841.
Vibration emission value / Uncertainty
Impact tightening of fasteners of the maximum capacity of the tool| ah=16,7 m/s 2 / K=1,5 m/s 2

WARNING!

The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure.
The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may significantly increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle. These conditions may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organising work patterns.
WARNING! Read all safety warnings, instructions, Failure to follow all instructions listed below may result in electric for future reference.

IMPACT WRENCH SAFETY WARNINGS

Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

Clamp the workpiece with a clamping device. Unclamped immediately if it stalls. Do not turn on the product again while it is still stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the product stalled and rectify this, paying heed to the safety instructions.
The dust produced when using the product may be harmful to health. Do not inhale the dust. Wear a suitable dust protection mask.
Remove the battery pack before starting any work on the product.

SPECIFIED CONDITIONS OF USE

The product is intended for fastening and loosening bolts and nuts.
Do not use the product for any other purpose.

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING!
product damage due to a short circuit, never immerse your tool, chemicals, and bleach or bleach containing products, etc., can cause a short circuit.
Do not dispose of used battery packs in the household refuse or protect our environment.
Use only AEG chargers for charging AEG battery packs. Do not use battery packs from other systems.
Never break open battery packs and chargers, and store them only in dry rooms. Keep battery packs and chargers dry at all times.
Battery packs that have not been used for some time should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged after use.
To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged.

For battery pack storage longer than 30 days:

• Store the battery pack where the temperature is below 27°C and away from moisture.
• Store the battery packs in a 30% – 50% charged condition.
• Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being overloaded and helps to ensure long life.
If the product does not start up again, the battery pack may have discharged completely. Recharge the battery pack.

TRANSPORTING LITHIUM BATTERIES
Legislation requirements.
Transportation of those batteries has to be done in accordance with local, national, and international provisions and regulations.

• Batteries can be transported by road without further requirement.
• Commercial transport of lithium-ion batteries by third parties is and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
• Ensure that the battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that the battery pack is secured against movement within the packaging.
• Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

MAINTENANCE

Use only AEG accessories and spare parts. Should components that have not been described need to be replaced, contact one of our AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the product can be ordered. State the product type and the serial number printed on the label, and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth- Straße 10, 71364 Winnenden, Germany.

SYMBOLS

| Read the instructions carefully before starting the
product.
---|---
| CAUTION! WARNING! DANGER!
| Remove the battery pack before starting any work on the product.
| Wear eye protection.
| Wear protective gloves.
| To reduce the risk of injury or damage, avoid contact with any hot surface.
| Do not dispose of electric tools, batteries/rechargeable batteries together with household waste material.
Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice and collection point.
| No-load speed
V| Volts
| Direct current
| European Conformity Mark
| Ukraine Conformity Mark
| EurAsian Conformity Mark

EC-DECLARATION OF CONFORMITY

We declare as the manufacturer under our sole responsibility that the product described under Technical Data fulfills all the relevant provisions of the following European Directives, European Regulations and harmonised standards.1
Authorised to compile the technical file.2

Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
1 2011/65/EU (RoHS)
2014/30/EU
2006/42/EC
EN 62841-1:2015
EN 62841-2-2:2014
EN 55014-1:2021
EN 55014-2:2021
EN IEC 63000:2018

Vice President, Quality – Asia
Winnenden, 2021-11-26
2 Alexander Krug, Managing Director
Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden,
Germany

www.aeg-powertools.eu
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany (12.21)
961096814-01B
AEG is a registered trade mark used under
license from AB Electrolux (publ).

Documents / Resources

| AEG BSS18MTF12BL Brushless Cordless Impact Wrench [pdf] Instruction Manual
BSS18MTF12BL Brushless Cordless Impact Wrench, BSS18MTF12BL, Brushless Cordless Impact Wrench, Cordless Impact Wrench, Impact Wrench
---|---

References

• AEG - AEG Powertools

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>