rapidine Profile Leg Back to Back Workstations Instruction Manual

Table of Contents

Specifications:

Model: Deluxe Infinity Profile Leg Back-to-Back Workstations
Assembly Time Required: 40-45 minutes
Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler (*Tools not included)
Skill Level: Easy
Recommended Persons for Assembly: Two

Assembly Instructions for Profile Leg Back-to-Back Workstations:

Person Model:

Person Model:

Person Model:

Frequently Asked Questions (FAQ):

Q: Can one person assemble the workstation?
A: While it is recommended to have two persons for assembly, one person with basic skills can also assemble the workstation.
Q: Are the tools required for assembly included with the product?
A: No, the tools required for assembly (Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler) are not included in the package.

Assembly Instructions:
Eternity Leg Back-to-Back Workstation

Time Required:
40-45 minutes

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert.
For most products, two persons are recommended.

NOTE

As this is a commercial product, some intermediate skills may be required.
No pre-drill holes or markings are provided on our tables or desktops.
Please check you have all the hardware before assembling.
If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, the required hardware part, and the quantity.
Please retain your receipt as proof of purchase to validate your warranty.
Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
Remove all wrapping materials, including staples and packing straps before you start to assemble
Keep all hardware parts out of reach of children.

CAUTION

Heavy product. Do not attempt to lift or move without help
Do not tighten screws and bolts until completely assembled.
Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

If parts are missing, broken, damaged, or worn stop using the product until all repairs are made.
Failure to follow these warnings could result in serious injury.

MODEL NO: Profile Leg Back to Back – 2 Person

$Profile-Leg-Back-to-Back-Workstations-fig- $2$$ $Profile-Leg-Back-to-Back-Workstations-fig- $3$$ $Profile-Leg-Back-to-Back-Workstations-fig- $4$$

MODEL NO: Profile Leg Back to Back – 4 Person

$Profile-Leg-Back-to-Back-Workstations-fig- $5$$ $Profile-Leg-Back-to-Back-Workstations-fig- $6$$ $Profile-Leg-Back-to-Back-Workstations-fig- $7$$

MODEL NO: Profile Leg Back to Back – 6 Person

$Profile-Leg-Back-to-Back-Workstations-fig- $8$$ $Profile-Leg-Back-to-Back-Workstations-fig- $9$$ $Profile-Leg-Back-to-Back-Workstations-fig- $10$$

IMPORTANT NOTE:

Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Don’t tighten all screws/bolts until all completely assembled.
Keep all hardware parts out of reach of children.