BOSCH Relay Smart Home Controller II Device User Manual

BOSCH Relay Smart Home Controller II Device

Product Information

Specifications

• Product: Relay
• Compatible with: Bosch Smart Home Controller II
• Operation Modes: On/Off-Switch, Pulse-Control
• Switch Functions: On/Off-Switch, Pulse-Control
• Scheduling: Manual/Automatic
• Profiles: Standard, Lamp, Electric Heating, Boiler
• Impulse Control: Time, Trigger, Length
• Child Lock Functionality
• Automation/Scenarios Support
• Services Integration: Alarm System, Motion Light

Product Usage Instructions

• On/Off-Switch Operation:
  Use the switch button to turn the relay on or off manually. You can also set schedules for automatic switching.

• Pulse-Control:
  Control the relay using pulses. Specify the time of the last impulse, trigger impulses, and adjust the impulse length in seconds.

• Profiles:
  Select from different profiles like standard, lamp, electric heating, or boiler to customize relay behavior.

• Child Lock:
  Activate the child lock feature to prevent accidental operation by children.

• Range Extension:
  Get information on extending the range of the relay for improved connectivity.

• Automation/Scenarios:
  Create automation or scenarios using the relay for tasks like alarm system integration or motion light control.

Frequently Asked Questions (FAQ)

• Q: Can I use the relay with other smart home systems?
  A: The relay is designed to work specifically with Bosch Smart Home Controller II and Matter System.

• Q: How do I reset the relay in case of electrical faults?
  A: In case of electrical faults like overheating, refer to the user manual for specific reset instructions or contact customer support.

Product Description

As the heart of the system, the Smart Home Controller II protects your private data and controls communication between the app and all devices.

Description of the symbols

• Warning! Note about hazards
• Note: Additional important information
• Note about the installation video

Safety instructions

• Read this user manual completely before installing or commissioning the device and pay particular attention to the hazard information.
• Keep the user manual in a safe place throughout the entire service life of the device.
• Fire hazard due to electrical current! There is a risk of fire when the electrical connection is not used properly. Only use the product with the specified, approved power supply unit.
• The device may only be connected to an easily accessible power socket. The plug must be removed in the event of a hazard.
• The device is not a toy! Do not allow children to play with it. Never leave the packaging material lying around unattended. Plastic film and small parts may pose a danger to children.
• This device may be used by children from 8 years of age and by persons with reduced physical, sensory, or mental capacities, or a lack of experience and knowledge provided these persons are supervised or have been instructed in the safe use of the device, and understand the corresponding risks.
• When remotely or automatically controlling a device, it is not always possible to guarantee that commands are executed or that the correct device status is displayed in the app and on other Smart Home display devices because of external circumstances.
• This may lead to material damage and/or personal injury.
• Therefore, you must ensure to the greatest extent possible that no person is endangered at the time of remote operation or automated control.
• Please take special care when setting up or adjusting the remote control or when using the automated control and check the desired functionality at regular intervals.
• For safety and approval reasons (CE/UKCA), the device may not be modified, and/or no changes may be made to the device without authorization.
• We accept no liability for material damage or personal injury which is caused by improper use or by not observing the safety instructions. In these cases, any guarantee claim becomes void! We accept no liability for consequential damage.
• Do not use the device if it has damage visible from the outside, for example, to the housing, control elements, or connection sockets, or if it has a malfunction. If in doubt, please contact our service team.
• Do not open up the device. It does not contain any parts to be maintained by the user. If a fault occurs, have the device checked by a specialist.
• Only operate the device indoors and do not expose it to moisture, vibrations, constant sunlight, or other sources of heat, extreme cold temperatures, and mechanical stress.
• Only use the device together with original components and recommended products from Bosch partners.

Notes

• The range within buildings can deviate greatly from the range in open spaces.
• In addition to the transmitting power and the receiving properties of the receiver, environmental factors such as humidity, as well as the local structural situation, play an important role.
• The device is only intended for use in residential environments.
• The device is only intended for private use.

Product Overview

Item Name

1| Function key
2| Power LED
3| Network LED
4| Cloud LED
5| Reset button
6| USB connection
7| QR code
8| Network connection (RJ45)
9| Supply voltage connection (USB-C)
10| Power supply unit (USB-A output, 5 VDC, 2 A max.)
11| EU adapter
12| UK adapter
13| Power cable, 1.5 m (USB-A to USB-C)
14| Power cable (RJ45)

The status LEDs (2, 3, 4) show the status of the controller using flashing codes.

up.
Lights green| The device has started up| None
Flashes red| Start-up failed| Disconnect the Smart Home controller from the power and reconnect it. If the LED flashes red again, then check the internet connection; connect the controller to another network if possible.
Network LED| Status| Recommended action
Flashes yellow| Searching for a network connection| None
Lights green| Network connection established| None
Flashes red| Network connection failed| Check your network settings.
Cloud LED| Status| Recommended action
Flashes yellow| The update is being downloaded from the Bosch Cloud or data is being exchanged via the tunnel connection.| None
Lights green| Remote access via the Bosch Cloud is activated and established.| If you do not want to access your Smart Home system while out and about, then you can deactivate remote access in the Smart Home app.
Flashes red| The Bosch Cloud connection failed and remote access to your Bosch Smart Home system is not currently possible.| Disconnect the Smart Home controller from the power and reconnect it. If the LED flashes red again, then check the internet connection.

Mounting instructions

• The standards and directives applicable in your country must be obeyed during planning, set-up, operation, and maintenance.
• The controller can be used in a horizontal position or mounted on the wall.
• When selecting the mounting location and when drilling, pay attention to the areas where electrical wires run, or to any supply cables.
• Please also note any additional information on the product.
• Always lay the cables of connected devices in such a way that they cannot pose a hazard to people or pets. Please also note any additional information on the product.
• ݅ For electronic devices (Smart Home hubs, routers, power supply units, etc.), radio interference may occur under some circumstances if the distance between the devices is less than one meter. If this occurs, please select a larger distance between the devices.
• ݅ Screws and plugs are not included in the box contents. Fillister head screws or cylinder head screws with a head diameter of max. 8 mm and a head height of max. 4 mm are recommended.

Start-up

Insert the network cable into the controller network connection (9) and a free LAN port on your Wi-Fi router. Now insert the cable for the power supply unit supplied into the controller supply connection (10). Then plug the power supply unit into a free socket. The status LEDs (2, 3, 4) show the status of initialization after starting through flashing codes (see product overview).

• When you connect the controller to the internet for the first time, it automatically searches for software updates. If an update is required, it is automatically downloaded and installed by the controller. This process can take more than 30 minutes. The controller cannot be started during this time. Please do not disconnect the controller from the power connection for the duration of the process.
• The Smart Home Controller II requires Ipv4 in the local network This is usually the standard configuration for your router.

Download the “Bosch Smart Home” app from your app store. You will need this for installation, configuration, and operation.

• To configure the controller, your mobile device must be on the same network.

Start the Bosch Smart Home app and follow the instructions.

The Bosch Smart Home system can be used by other mobile devices. To do this, first install the Bosch Smart Home app on the additional mobile device and follow the instructions in the app.

• You can also use the explanatory videos and additional information on our website as an additional aid for mounting, installing, starting up, and restoring the factory settings on your Bosch Smart Home controller: https://www.boschsmarthome.com/rom/controller-2

Resetting to factory settings

You have two options for resetting the Smart Home controller to the factory settings:

1. Reset via the Bosch Smart Home app
   Go to “More” then “System” in the app and select “Factory settings”. Follow the instructions.

2. Reset via the reset button
   Press the reset button (5) until the status LEDs (2, 3, 4) on the front flash red, release it briefly, and press and hold it again until the LEDs light up yellow. The device then restarts. Please note that it can take a few minutes until the controller is ready for operation again.

When resetting the Smart Home controller to the factory settings (using the app or the reset button), only the Smart Home controller is reset. All Smart Home devices that were previously integrated should be manually reset after resetting the controller.

Maintenance and cleaning

The device does not require maintenance. Leave any repairs to a specialist. Clean the device with a soft, clean, dry, and lint-free cloth. When cleaning, do not use any cleaning agents containing solvents.

Simplified declaration of conformity

Robert Bosch Smart Home GmbH hereby declares that the radio equipment type Bosch Smart Home BSHC-2 corresponds with Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available via the following web address:  https://eu-doc.bosch.com

Robert Bosch Smart Home GmbH hereby declares that the radio system type BSHC-2 complies with Regulation 2017. The full text of the declaration of conformity is available at the following internet address: https://gb-doc.bosch.com.

Environmental protection and disposal

This symbol means that this product must be disposed of separately from general household waste. As an end user, you are obligated to dispose of the product via separate waste collection, for instance by passing it to an official collection point, in line with the relevant national regulations. By collecting waste separately, you are making a valuable contribution to protecting the environment and human health. This is because, by treating old equipment properly, on one hand, the potentially negative effects associated with the presence of hazardous substances are prevented, and, on the other hand, raw materials are conserved through their recovery.
Please also note that the avoidance of waste is an even more valuable contribution to environmental protection. Wherever possible, as well as finding a further use for the device yourself or having it repaired, passing the device to a second user is also an ecologically valuable alternative to disposal.

It is also possible to return these to the place you bought the product from, provided the distributor offers a returns service voluntarily or is legally obligated to do so.
Please note that you alone are responsible for the erasure of all data on the device, in particular confidential and personal data.

Open source software
This Bosch Smart Home product uses open-source software. You can obtain the license information in two ways:

1. Directly via the Smart Home controller: Do this by inserting any empty USB stick into the USB port on the back of the device. The license information along with further product information will automatically be saved on the stick.
2. Online at → https://www.bosch-smarthome.com/rom/open-source-software

Communication between iPhone, iPad, Apple Watch, HomePod, HomePod mini, or Mac and the HomeKit-enabled Smart home controller is secured by HomeKit technology.

Technical data

Technical modifications reserved

Spare parts/accessories
For information on available spare parts or accessories, please visit: https://www.bosch-smarthome.com/rom/spareparts

Service Information
Robert Bosch Smart Home GmbH Schockenriedstraße 17
70565 Stuttgart-Vaihingen Germany
service@bosch-smarthome.com
www.bosch-smarthome.com/service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>