Beacon Bookshelf SKU 67601 Seagrass Wood Set Installation Guide
- May 15, 2024
- Beacon Bookshelf
Table of Contents
Beacon Bookshelf SKU 67601 Seagrass Wood Set Installation Guide
Scan me!
Free Lifetime Warranty
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
What you need
- Some bubbly or your preferred relaxant
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
- Drill
- 1/4” Drill Bit
Weight Limitation
110
lbs max weight capacity
Storage Cabinet Top Max. Capacity: 25lbs.
Adjustable Shelf Max. Capacity: 20lbs.
Bottom Cabinet Shelf Max. Capacity: 20lbs.
Open Shelf Max. Capacity: 15lbs. per shelf (x3)
What’s included
The goods
IMPORTANT
1. Do not tighten bolts / screws completely until all bolts / screws are
lined up and inserted into holes.
2. Do not over tighten screws and bolts to avoid stripping.
What’s included
Step 1
Step 2
You can pull out the Allen Key for this step!
Step 3
Step 4
Secure the Top Stretcher Back (H) and Top Stretcher Front (R) to the Cabinet Top Panel (B) using the Cam Locks (6).
Double check to make sure the Top Stretcher (H) is facing the right way before tightening!
How to use cam locks
Did you know?
Cam locks are used to join two panels together, usually the edge of one to the
flat side of another.
Still having issues?
If a cam lock seems to be spinning in place or is not “catching” or pulling
the panels together as expected, first remove the cam lock & try again while
making sure that everything is properly positoned & oriented.
If you are still having issues getting things working as expected, first
remove the cam lock then unscrew the cam bolt slightly (less than 1 complete
turn) to see if that helps with the alignment of the cam lock & bolt.
Step 5
Tighten the Top Stretcher Back (H) and Top Stretcher Front (R) using the M4*35 mm Screws (7).
Step 6
Step 7
You’re doing great! Now would be a great time to grab a mid-assembly snack. Chips and salsa anyone?
Step 8
Insert the M8*30mm Wooden
Dowels (5) into the pre-drilled holes as shown below to secure the Cabinet
Bottom Panel (E).
Line up the doors with their respective holes in the top & bottom panels
before moving forward with placing the bottom panel and doors in place.
Be sure to sandwich 2 Flat Washers (Plastic) between each door’s pin hinge &
the top & bottom panels.
Step 9
Secure the Cabinet Bottom Panel (E) using three M435 mm Screws (7). Then secure four 1/4”55mm Hex Button Head Bolts (8) and Flat Washers (3) into the Barrel Nuts (9) as shown below.
Step 10
Let’s get the frame built! Secure the Top Vertical Support (Right) (K), Middle Vertical Support (Right) (M), and Bottom Vertical Support (Right) (O) together and the Top Vertical Support (Left) (J), Middle Vertical Support (Left) (L), Bottom Vertical Support (Left) using the 1/4”*32mm Hex Button Head Bolts (2) and Flat Washers (3).
Step 11
Secure the right supports on to the bookcase unit first.
Step 12
Next, secure the Top Open Shelf Panels (A) to the right supports. Make sure that the holes on the panels are in the back before securing.
Step 13
It’s all coming together! Time to secure the left supports.
Step 14
Place the Shelf Pins (10) at your desired height and carefully place the Shelf (F) on top of the pins.
Step 15
Looking good! Adjust feet if the bookcase seems wobbly or unlevel when placed against the wall.
Step 16
Safety first! Using a 1/4” drill bit, drill three holes into your desired area on the wall 338mm a part from one another. Make the bottom Anchor 983mm from the ground. Carefully push the Wall Anchors (12) in.
Step 17
Last but not least, grab a friend and carefully line up your bookshelf to the Wall Anchors (12) and secure using the M4*50mm Screws (11).
No heartburn,
when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
Safety first, fun later
We want your product to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months.
For proper care and treatment, please check our website at NathanJames.com/products
Safe use of this product starts with you.
Use this product responsibly with the primary concern for your safety. Follow
assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for
any injuries or death resulted from failure to follow instructions or improper
use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were
originally intended to be sold. Any modifications will present the risk of
creating significant safety issues which NJ will not be responsible for.
Proper use
DO NOT use for commercial purposes
DO NOT frolic on bookshelf
DO NOT use as foot stool
DO NOT leave spilled liquid on shelves
DO NOT use if damaged
DO NOT make temporary repairs
DO NOT use outdoors
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please
use your phone to scan the QR code to register your product or visit
https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our prices low for your next
purchase.
Brooklyn Burdon
Founder, Nathan James
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>