BAIJIALI BJL666 Retro Portable Radio AM FM SW Instruction Manual
- May 15, 2024
- BAIJIALI
Table of Contents
BAIJIALI BJL666 Retro Portable Radio AM FM SW
Product Information
Specifications:
- Model: BJL666
- Bands: FM/AM/SW
- Frequency Range:
- AM: 522~1710KHz
- SW: 5.6~22.0MHz
- FM: 76~108MHz
- Horn Size : 50mm, 4*3W
- Power Supply: 2*AA batteries / 14500 Lithium battery (not included) / USB cable powered
Product Usage Instructions
Battery Operation:
The radio can be powered by the following methods:
- Powered 1: 14500 Lithium battery (not included)
- Powered 2: 2*AA batteries
- Powered 3: USB cable powered
Selecting Broadcast Band:
Move the function switch to your desired band (FM/AM/SW).
Adjusting Volume:
Set the volume to the optimum listening level using the volume adjustment
control.
Tuning Station:
Turn the tuning knob to select your desired station within the selected
band.
External Antenna:
Extend the telescopic antenna for optimal reception on FM or SW bands.
Using Earphones:
To listen privately, plug in earphones into the earphone jack. The machine
speaker will automatically disconnect when earphones are connected.
Battery Replacement:
If the listening time is long or radio reception is poor, replace the
batteries following the labeled polarity in the battery compartment.
Power Off:
When not in use, turn off the power switch to conserve power.
Frequently Asked Questions (FAQ)
-
What should I do if the radio effect is not good?
Try extending the telescopic antenna for better reception. If the issue persists, consider replacing the batteries. -
Can I listen with earphones to avoid disturbing others?
Yes, you can use earphones by plugging them into the earphone jack. The machine’s speaker will automatically disconnect when earphones are connected.
PRODUCT OVERVIEW
- Telescopic Antenna
- Tuning Frequency Indicating Window
- Tuner
- AM Band Selector
- Earphones Jack
- Power Jack
- SW Band Selector
- Power Switch
- Volume reduction
- Volume reduction
- FM Jack
- Horn
- Power Indicator
- Hand Belt
BATTERY INSTALLATION
OPERATION
-
Battery operation
- Powered 1: 14500 Lithium battery(no included).
- Powered 2: 2*AA batteries.
- Powered 3: USB cable powered.
Please Note: When you don’t want to use the radio for a long time. please take out the batteries from the unit.
-
Select broadcast band by moving the function switch to your desired band.
-
Adjust the volume to optimum listening level.
-
Tune the turning to select desired station.
-
External the TELESCOPIC ANTENNA for optimum reception on FM or SW.
SPECIFICATION
- Frequency: AM:522~1710KHz
- SW: 5.6~22.0MHz
- FM: 76~108MHz
- Horn: 50mm, 4 Ω 3W
- Power Supply: 2*AA batteries /14500 Lithium battery(no included) /USB cable powered
-
Open the battery door and load the (2×AA)battery into the battery bin according to the direction indicated in the battery bin.
NOTE: Push the battery bin cover in the direction indicated. -
Turn on the power switch, observe the band instruction, choose to listen to FM/AM/SW band program.
-
After turning on the power switch, turn the volume and choose the right volume to listen.
-
Rotate the tuning knob, observe the frequency indicator window and the pointer, select the radio program you want to listen to.
-
When listening to FM/SW band radio, pull out the telescopic antenna and change the length and angle of the antenna to get the best listening effect.
-
AM band is received by magnetic antenna in the machine, and the best listening effect can be obtained by rotating the direction of the radio.
-
In order not to interfere with other people’s rest, you can use earphone to listen to,the earphone plug into the earphone jack (the machine speaker automatically disconnected ), then use the earphone to listen to.
-
If the listening time is long or the radio effect is not good, please open the battery bin and replace the battery according to the labeled polarity in the battery bin.
-
When you don’t want to listen, turn the power switch to turn off the power supply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>