Deeyaple Magnetic Thermometer White Clock User Manual
- May 15, 2024
- DEEYAPLE
Table of Contents
Temperature and Humidity Monitor
Instruction Manual
DIAGRAM
- Temperature Display
- Humidity Display
- Date Display
- Time Display
- Face Icon (Air comfort indicator)
- Low Battery Icon
- Set
- Increasing
- Decreasing
- Battery Cover
- Standing stand
TEMPERATURE
- Temperature Range:-9.9°C~50°C(14.2°F ~122°F)
- lemperature Accuracy: +1°C(0°C to 40°C) +2°C(Other temperature ranges)
- Detection frequency:10 seconds Resolution: 1°C
Tips: If the temperature is lower than -9.9°C display:LL°C;
If higher than 60°C, display: HH°C
HUMIDITY
- Humidity Range: 10%~99% RH;(Display Max/Min)
- Humidity Accuracy: +5% RH(30% RH to 80% Rb), +7% RH(Other humidity ranges)
- Detection frequency: 20seconds Resolution: 1RH
Tips: Displays 10% when the humidity is below 10% and 99% when it is above 99%
LOW BATTERY ALERT
When the power is too low, the screen low battery icon will shows, please
replace the battery in time.
INSTALL
When the power is too lo, the screen ow battery icon,
- Open the stand and place it on the table.
- Place on Metal Surface with built-in magnet, you can stick it to any metal surface directly.
DATE/CLOCK SETTING
- Press [SET] button and hold for 3 seconds to enter date setting, and the “Year” icon will flicker, press [++] or [=] button to adjust the Year.
- Press [SET] again to enter Month setting, and the “Month” icon will flicker, press [ + ] or [ — ] button to adjust the Month.
- Press [SET ] again to enter Date setting, and the “Date” icon will flicker, press[ + Jor[ — ]button to adjust the Date.
- Press [SET ] again to enter Hour Setting, and the “Hour” icon will flicker, press [+] or [=] button to adjust the Hour.
- Press [SET] again to enter Minute Setting, and the “Minute” icon will flicker, press [ +] or [=] button to adjust the Minute. Long press [+]/[-] for quick increment/decrement.
After Setting, press [SET] button to confirm or no operation 15s to automatically save and return to time display.
12/24 HOURS SWITCH Under normal mode, press[ s ET ] button to switch 12/24H
time format (12H format have AM/PM icon display on the screen).
CELSIUS AND FAHRENHEIT SWITCH Under normal mode, press [ + ] button to switch
Celsius°C /FahrenheitT
TEMPERATURE AND HUMIDITY CALIBRATION
If the temperature or humidity readings differ from your other equipment, or
if product placement/environmental factors affect the accuracy of your data,
calibration can improve accuracy.
Press the [ + ] and [ — ] button simultaneously until the temperature begins
to flicker, enter to calibration mode. Release the both button and just press
[ + y[ – ] button to adjust the temperature.(Max±5°C/41°F)
Press [SET] button again to enter the humidity calibration, and press the [ +
y[ – ] button to adjust the humidity.(Max±10 %)
After Setting, press [SET ] button to confirm or no operation 15s to
automatically save and exit calibration mode. Remove the battery for 10
seconds to resume initialization.
COMFORT LEVEL
| Temperature <19°C| 19°sTemperatures27°C| Temperature> 27°C
---|---|---|---
Humidity <30%| | |
30%Humidity70%| | |
Humidity > 70%| | |