YAOMAISI G9R Wireless HDMI Receiver User Guide
- May 15, 2024
- YAOMAISI
Table of Contents
YAOMAISI G9R Wireless HDMI Receiver
Product Information
Specifications:
- Wireless Band: 2.4G/5G Hz
- Transmission Range: Up to 165ft/50m
- Simultaneous Playback: Up to 4 RXs
- Supported Devices: Laptop, PC, DSLR Camera, Gaming Console, TV Box, Cable Box, Blu-ray/DVD Player, Media Streaming Devices, Set-Top Boxes
Product Usage Instructions
Connecting the Receiver and Transmitter:
- Connect the Type-C cable (included) to a 5V/1A charger for stable power.
- Unfold the antennas on both the RX and TX surfaces for enhanced signal transmission.
Pairing Instructions:
For Manual Pairing:
- For separately purchased RX/Receivers, manually pair by pressing the TX and RX buttons simultaneously until the TX starts flashing.
- Release the buttons and wait for 5-10 seconds until the pairing is complete.
For Pre-paired Sets:
- For Original G9R Wireless HDMI Sets, wait for 5-10 seconds for automatic pairing of the RX with the TX.
Additional Usage Information:
- The product operates on the 2.4G/5G Hz wireless band without requiring additional apps, drivers, software, Wi-Fi, or Bluetooth connections.
- It supports mirroring content from laptops, PCs, and other output devices onto up to four large-screen displays simultaneously.
- Note that mobile device mirroring is not supported for large screens; it is specifically designed for laptop-to-smartphone transmission.
- The design allows iPads and iPhones to function as receivers for seamless mirroring.
G9R Manual Pairing Guide (Step-by-Step):
- TX / Transmitter: Plug into the output device’s HDMI port.
- RX / Receiver: Plug into the display device’s HDMI port (e.g., Projectors, TVs).
- Unfold the antennas on both RX and TX surfaces for a strong signal.
- Connect both devices to a Type-C cable and a 5V/1A charger for consistent signal transmission.
- Ensure sufficient power supply to prevent interruptions or delays.
- Wait for the connection interface to appear on the display device before initiating pairing.
- Simultaneously press the TX and RX buttons to pair; hold for 5-8 seconds until the TX starts flashing.
Frequently Asked Questions (FAQ):
-
Q: Do I need to install any additional software or apps to use the G9R Wireless HDMI Adapter?
A: No, the G9R operates without requiring any additional apps, drivers, software, Wi-Fi, or Bluetooth connections. -
Q: How many devices can I simultaneously mirror content onto using the G9R Wireless HDMI Adapter?
A: You can mirror content onto up to four large-screen displays simultaneously using the G9R Wireless HDMI Adapter.
User Guide and Troubleshooting Tips
We’ve observed that some customers have experienced trouble with pairing and extended distances.
For addressing pairing and extended distance concerns, it’s crucial to follow these steps for using the receiver and transmitter:
- Connect to a Type-C Cable (included) with a 5V/1A charger for stable power.
- Unfold the antennas on both RX and TX surfaces to enhance signal transmission.
Upon RX/Receiver successfully plugging into TVs/Monitors- then a connection interface will appear on the receiver’s screen with Connection Solution, Troubleshooting, and Useful Tips.
Separately Purchased RX/Receivers require manual-pairing;
If receivers fail connection/pairing, or signal loss issues, please try manual
pairing:
- Once the connection interface appears on the screen,.
- Simultaneously press the TX and RX buttons, Until the TX starts flashing for connection.
- Release the buttons and Simply wait for 5-10 seconds, Until TX stops flashing, pairing complete.
- Original G9R Wireless HDMI Sets come Pre-paired transmitter and receiver- Simply wait for 5-10 seconds, and the RX will automatically pair with the TX. Operate and function on the 2.4G/5G Hz wireless band– no apps, no drivers, no software, no Wi-Fi, or no Bluetooth connections are required.
- G9R wireless HDMI adapter employs dual-band WIFI technology (2.4G and 5G) to cater to your essential needs. It efficiently transmits presentation, movie video, and audio signals wirelessly from the source to the target. For seamless wireless mirroring from Output Device (Laptop, PC) to Display Devices like TVs and projectors, can mirror content onto up to four large-screen displays simultaneously.
- Please Note: G9R differs from other HDMI Wireless Extender Kits. It enables simultaneous playback on up to 4 RXs (TVs/Display Screens) within a 165ft/50m range. However, it supports only laptop-to-smartphone transmission and doesn’t mirror mobile devices to large screens. The design is tailored for using iPhones or iPads as receivers, allowing your iPad Pro to function as a mirroring device.
Pairing Guide (Step-by-Step)
| -TX and RX
marked on the surface of the product
-TX / Transmitter Plug the transmitter into the output device’s HDMI port
-RX / Receiver Plug the Receiver into the Display device’s HDMI port (Projectors, TVs)
---|---
Output Devices- Laptop, Personal Computer (PC), DSLR Camera, Gaming
Console (e.g., Xbox, PlayStation), TV Box, Cable Box, Blu-ray/DVD Player,
Media Streaming Devices (e.g., Roku, Apple TV, Chromecast), Set-Top Boxes
(e.g., cable or satellite boxes)
| -Unfold
the antennas on both RX and TX surfaces for a strong signal.
| -TX and RX
Connect to a Type-C cable (included in Package) Connect both the TX and RX
devices to a Type-C cable and a 5V/1A charger for consistent signal
transmission.
Power Requirements: Ensure that the devices powering the TX and RX have sufficient power- Insufficient power in a laptop might cause interruptions, color loss, or delays.
| – Receiver Pairing: Wait for 3-5 seconds the connection interface
appears on tvs/display
---|---
| – Once the connection interface appears on the display device
– Simultaneously press the TX and RX buttons to Pair. Press for 5-8 seconds, until the TX starts flashing.
|
-Release the buttons Simply wait for 5-10 seconds, Until TX stops
flashing, Pairing Complete.
-Allow seconds for initialization. Enjoy seamless streaming without delay.
If one of the receivers encounters pairing or signal loss issues , please try:
Once the connection interface appears on the screen, simultaneously press the TX and RX buttons, Until the TX starts flashing for connection.Release and Simply wait for 5-10 seconds, Until TX stops flashing, pairing complete.
Additionally, we’ve created step-by-step instructional videos available on our product listing “G9R
Pair Guide Quick Look: Plug and Play” and “G9R Pair Guide Step-by-Step: Super Easy to Setup “
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>