TRENDNET TWP-101T 4K Wireless Presenter Add-On Transmitter User Guide

TRENDNET TWP-101T 4K Wireless Presenter Add-On Transmitter

Installation Instructions

1. Press the Power button at the back of the TWP-101 R to power on the device.
   

2. Plug HDMI cable into the receiver and into your Video device’s (TV, monitor, or projector) HDMI port.
   

3. Plug TWP-101T’s HDMI and USB cables in your laptop.

4. Wait till the LED turns solid red, press the main button to connect.
   

Connect Android Devices

1. Download and install “Google Home” App from the Google Play Store.
   

2. Connect TWP-101 R to the Internet with an Ethernet cable, or set up its wireless connection. To set up wireless connection, please refer to the User’s Guide on www.trendnet.com

3. Connect to the SSID “TRENDnet_HDMI” from your Android device and enter the password shown on the screen of your video device.
   

4. Go to Google Home, find the device, then tap on it to cast your content.
   

Connect iOS Devices

1. Connect to the SSID “TRENDnet_HDMI” From your iOS device and enter the password shown on the screen of your video device.
   

2. Connect TWP-101 R to the Internet with an Ethernet cable, or set up its wireless connection. To set up wireless connection, please refer to the User’s Guide on www.trendnet.com

3. Swipe down from the upper-right corner to reveal the AirPlay™ Control Center.

4. Tap the “Screen Mirroring” button.
   

Pair Addional TWP-101T

1. Connect TWP-101 T to TWP-101 R with USB cable.
2. Press the main button to Pair.
3. When screen shows Pairing OK, the TWP-101 T is ready to use.
   

Declaration of Conformity

Manufacturer’s Name and Address

TRENDnet, Inc.
20675 Manhattan Place
Torrance, CA 90501 USA
Zwolsestraat 156 2587 WB
The Hague The Netherlands

Product Information:
Model Number: TWP-101T /TWP-lOORIK
Product Name: 4K Wireless Presenter Add-on Transmitter / 4K Wireless Presenter Kit with Audio Support
Trade Name: TRENDnet

TRENDnet hereby declares that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.

Safety:   EN 62368-1:2014
Health:   EN 62311:2020
EMC:
EN 301489-1 V2.2.3 (2019-11)
EN 301489-17 V3.2.4 (2020-09)
EN 300 328 V2.2.2 (2019-07)
EN 55032: 2015/All:2020
EN 55024: 2010/Al:2015:2015
EN 55035: 2017/All:2020
EN 61000-3-2:2019
EN 61000-3-3:2013/Al:2019
Radio: EN 301893 V2.1.1 (2017-05)

Person responsible for this declaration.
Place of Issue: Torrance, California, USA

Date: January 28, 2022
Title: VP of Technology
Name: Sonny Su

Signature:

Certifications

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received. Including interference that may cause undesired operation.

Waste electrical an electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or Retailer for recycling advice.

Applies to PoE Products Only: This product is to be connected only to PoE networks without
routing to the outside plant.

Note
The Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under normal use and service. Specific warranty periods are listed on each of the respective product pages on the TRENDnet website.

Technical Support

If you have any questions regarding the product installation, please contact our Technical Support.
Toll free US/Canada: 1-866-845-3673
Regional phone numbers available at www.trendnet.com/support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>