Furnishing Technology LWR007 RGB LED Controller Instructions
- May 15, 2024
- Furnishing Technology
Table of Contents
Furnishing Technology LWR007 RGB LED Controller
Product Specifications
- Product Name: RGB LED Controller
- Control Methods: Switch or Remote
- Power: Battery-operated
- Mode Options: Static colors, Breathing colors
- Flashing Speed Adjustment
- Brightness Adjustment
- FCC ID: 2A58L-DYRGB500
Product Usage Instructions
Switch Function:
- Power On/Off: Press and hold the power button.
- Mode Change: Short press the cycle button to switch between different modes.
- Flashing Speed Adjustment: Short press the power button.
- Brightness Adjustment: Press and hold the cycle button and short press the power button simultaneously.
Remote Control Instructions:
- Next Mode: Use the remote to go to the next mode.
- Previous Mode: Use the remote to go back to the previous mode.
- Pre-Mode: Use the remote to access a specific pre-set mode.
Frequently Asked Questions
Q: How do I change the color of the LED lights?
A: Use the switch or remote to cycle through the different static color options available.
Q: Can I adjust the brightness of the LED lights?
A: Yes, you can adjust the brightness by following the instructions provided in the manual.
Q: How do I change the flashing speed of the LED lights?
A: Short press the power button to adjust the flashing speed as desired.
RGB LED Controller Instructions
You can use the switch or remote to control the lighting effects.
Description of switch function
- Power on-off-Press and hold the power button.
- Change mode: Short press the cycle button. (Multiple mode options: static white/static red/static green/static blue/static purple/static cyan/static yellow/white breathing/red breathing/green breathing/blue breathing/purple breathing/cyan breathing/yellow breathing)
- Adjust the flashing speed:Short press the power button.
- Adjust the brightness: Press and hold the cycle button and short press the power button meanwhile.
Remote control instructions
NOTE
- During use, if the switch can work normally, but the remote control cannot, you need to perform the code matching operation.
- if the light is interfered by other remote controls or cannot be controlled remotely. Please power off and then power on again before performing code matching.
How to perform code matching operation: Press and hold the start button on the remote control for 3 seconds within 7seconds of turning on the power, the light strip flashes 3 times with white light, indicating that the code (remote control) is matched.
FCC
FCC ID:2A58L-DYRGB500
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>