dahua HFW3549T1-AS-PV Security Camera User Guide
- June 4, 2024
- Dahua
Table of Contents
**
**
dahua HFW3549T1-AS-PV Security Camera
**
**
Setting up the Face Mask Function
Series
- DH-IPC-HF/HFW/HDW/HDBW3X4X Series
- DH-IPC-HF/HFW/HDW/HDBW5X4X Series
- DH-IPC-HF/HFW/HDW/HDBW7X4X Series
Examples
- HFW3549T1-AS-PV
- HDW5241TM-ASE
- HFW5242H-ZE
- HDBW7442H-Z
- System Version: V2.800.00AD000.0.R
- Build Date: 2020-07-29
NB: The firmware version is based on the latest version when this document was created and may slightly differ from future versions, however this will not affect any of the functions.
-
Log in to the camera, go to Setting > Event > Smart Plan , click Face Detection to activate the function and click Save .
-
Go to Setting > Event > Face Detection , tick the Enable check box on the top right hand corner to enable the function.
By default the detection area will be set to full screen, if you wish to change the detection area, click Clear button first and then Click Draw button on the left hand side and draw inside live preview the shape of the target area for face detection and set the parameters.
Click Save at the bottom right hand corner to complete.
-
To check the face detection alarm record details click Alarm in the top right hand corner and tick IVS under the Alarm Type .
NB: The alarm records will not be kept after logging out. To check if the
alarm function is still operating normally once logged out, please trigger
another alarm.