Zler PU62003-W Heavy Duty Shower Chairs with Back User Manual
- May 15, 2024
- Zler
Table of Contents
Zler PU62003-W Heavy Duty Shower Chairs with Back
Thank You
First of all, thank you very much for choosing zler products, please read the instructions carefully before assembling.
Please check screws regularly to prevent accidents caused by screw looseness.
If you have any problems, please kindly contact us.
The product accessories are as follows:
| Number | Picture | Name | Quantity |
|---|---|---|---|
| A | Backrest | 1 | |
| B | Seat | 1 | |
| C | L-shape Tube | 2 | |
| F | **** | 70mm Screw & Washer | 4 Screws 4 Washers |
| G | **** | 42mm Screw & Washer | 1 |
| H | ****| Cross Bar & Black Rubber Washer| 2 Cross Bar & 4 Black
Rubber Washer
J|
| Leg| 4
Product Structure Diagram:
Before Assembly
- Please read the part list carefully and remove contents from carton. And then verify that all the parts are present. When the product is missing parts or some parts are damaged, please contact us immediately.
- Note: We can provide replacement parts to our customer if you need any replacement parts, please provide order number, part number, quantity, and pictures or video clips (if applicable) so that you can get what you need as soon as possible.
Secondly, Assembly instructions:
Step 1: Taking out the seat, 4 legs. Then you need to turn seat up-side-
down, and press the push pin so that you can insert leg into leg tube under
the seat. Please adjust four legs to the same height.
Step 2: In this step, you need to prepare four 70mm Screw & washer, two
cross tubes and four black rubber washer. Firstly, put the black rubber washer
on the ends of the cross bar. Next, fix the crossbar with the
70mmscrew&washer.
Step 3: Fix two cross bar with 42mm screw & washer as the follow picture.
Step 4: Pressing the push pin, insert L-shape tube, backrest
Additional Precautions:
- Inspect all parts for shipping damage before assembly. If there is shipping damage– DO NOT USE. Contact dealer/carrier for further instructions.
- Make certain that the height adjusting snap buttons fully protrude through the same respective hole of each leg extension. This will ensure that the leg extensions are securely locked in position and an even height is achieved.
- Ensure ALL thumb screws are tightened.
- Check the rubber tips on the leg extensions for rips, wear or if they are missing. Immediately replace any or all if any of these imperfections exist.
- All four leg extensions with rubber tips MUST touch the floor simultaneously at all times.
- When used in a tub, make certain the rubber tips are not touching the sides of the tub wall. 7. DO NOT stand on chair.
Product maintenance and maintenance methods:
- Do not scratch or scrape the surface of the product with hard objects to prevent material damage.
- For daily cleaning and maintenance, apply neutral synthetic detergent, wipe with a damp cloth, and then wipe with a dry cloth.
- Do not contact with strong acids and alkalis to prevent corrosion.
Product: Zler Shower Chair
Model: ZR-28LBM-BC-PU62003-W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>