Lavinda 54W UV LED Nail Lamp User Manual
- May 15, 2024
- Lavinda
Table of Contents
Lavinda 54W UV LED Nail Lamp
PACKING LIST
- Nail Lamp
- C Adapter
- Instruction
PARTS INSTRUCTION
- infrared Induction
- Digital display
- Mute/ Text display switch
- 1 OS timing button
- 30S timing button
- 60S timing button
- 90S Low heat mode
- Switch
- Power socket
PRODUCT INSTRUCTION
Designed for professional nail experts. Cure gel, builder, acrylic, and gem nails perfectly.
OPERATION INSTRUCTION
- Connect the charger to the power supply and the machine starts charging. Please use the original charger with 12V /2A, or the nail lamp will be damaged or can not be fully charged.
- The short press is a text display switch, you can choose the text size according to your need. The long press is a sound switch, you can choose mute if you need quiet nail time, or choose a speaker to provide audible feedback for each click.
- Automatic sensor mode: hand into the lamp, nail lamp begins to work. Hand out, the lamp stops working.
- Manual mode: press the time you need, set the bottom for the 10S/30S/60S (normal mode) to work. Press button 90S (low-temperature mode) to start working clockwise. This mode is painless during the curing. Besides, it has a time memory function.
- Please connect the correct adapter to charge. Battery charging status: The battery is charged for 3 hours and the working time is 4-6 hours. The “ on the display flashes to indicate charging, and it stops flashing to indicate full charge.
- Maintenance guide: If the lamp does not keep working for more than 30 minutes, please turn it off in case the battery life is shortened.
TECHNICAL INSTRUCTION
- Number of lamp beads : 30PCS
- Product Name: Square Rechargeable Nail Lamp AC Input: 100V-240V 50/60Hz
- DC Output : DC 12V 2A
- Power: Max 54W
- Wave Length: 365nm+405nm
CAUTIONS
- Please read the instructions carefully before using the lamp.
- Please use the correct voltage.
- Avoid liquid entering the machine to avoid malfunction.
- Please don’t use the machine when the timing button is faulty.
- Unplug the adapter if you don’t use the machine for a long time.
- Don’t use the machine when the adapter is faulty to avoid any potential risk.
- The single long bright time should not exceed 600 seconds to avoid reducing the service life of the product.
- Your eyes should not look directly at the light of the nail lamp for a long time.
- Please use the original charger(12V/2A). When the input voltage is more than 15V, the display shows “OU”, and the buzzer will alarm continuously to prevent the wrong use of the power adapter.
- If you do not use the machine for a long time, please charge the battery every 3 months to keep it healthier and longer.
Thank you for choosing our product! Ct: Fe RoHS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>