GLACER HW66265 Outdoor Acacia Wood Picnic Table Bench Dining Set User Manual
- May 15, 2024
- GLACER
Table of Contents
GLACER HW66265 Outdoor Acacia Wood Picnic Table Bench Dining Set
Product Information
Specifications:
- Product Name: Outdoor Acacia Wood Picnic Table Bench Dining Set HW66265-12-22
- Material: Acacia wood, Steel legs
- Includes: Big slat support, Side top, Small slat support, Middle slat support, Middle top, Bench seat, Seat apron, Steel legs, Corner support, Screws, Bolts, Allen key, Parasol hole cap, Iron dowels, Tools
Product Usage Instructions
Step 1: Assembly
- Insert Iron dowels (E) into the holes using the Tools (H).
- Fix and tighten Bolt (D).
- Repeat for each component.
Step 2: Connecting Parts
Follow the diagram to connect the parts together using the specified screws and bolts.
Step 3: Additional Assembly
Continue assembling the remaining components using the provided tools and hardware.
Step 4-6: Complete Assembly
Follow the steps outlined in the manual to fully assemble the picnic table bench dining set.
Care and Maintenance:
Please protect your outdoor furniture with a cover when not in use to prevent damage from long-term sunlight exposure. Extreme temperature and humidity can also affect the wood and metal frame. Regular cleaning and proper care will help extend the life of your furniture.
FAQ
- Q: How should I clean the outdoor dining set?
- A: Use a mild soap solution and a soft cloth to clean the wood surfaces. Avoid harsh chemicals that can damage the finish.
- Q: Can the picnic table bench dining set be left outside in all weather conditions?
- A: It is recommended to cover the set when not in use to protect it from sun damage and extreme weather conditions.
Before You Start
- Read each step carefully before starting. It is very important to ensure each step is followed in the correct order, otherwise assembly difficulties may occur.
- Most of the board parts are labelled or stamped on the raw edges. Have a check to make sure all parts are included.
- Work in a spacious area, preferably on a carpet close to where the unit will be used.
- Keep the hand tools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
Part List
TIPS
- Insert Iron dowels (E) into the holes using the Tools (H),
- fix and tighten Bolt (D)
- Remove Tools (H) and repeat for another one
Installation Instruction
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting. The use of furniture polish is not necessary. Should you choose to use a polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
Please protect your outdoor furniture with a cover when not in use since long- term sunlight exposure will result in damage on the surface. In addition to sunlight damage, wood and metal frames suffer when exposed to extremes in temperature and humidity. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>