ponycam 1512P HD Body Camera with Electronic Image Stabilization User Guide
- May 15, 2024
- ponycam
Table of Contents
BODY CAMERA
USER’S QUICK GUIDE
Product introduction
Basic Operations
Action
| Operation|
Reference Picture
---|---|---
Power On/Off| Hold the POWER button for 3 seconds|
Start Video Recording| Press the Video Record button|
Start Alarm Recording| Holding the SOS button for 3 seconds|
Start Audio Recording| Press the Audio Record button|
Take Picture| Press the Snap button|
Turn On Flash light| Holding the Snap button for 3 seconds|
Turn On IR| Holding the Laser button for 3 seconds(when IR is with manual mode
in menu)|
Turn On Laser| Press the Laser button(only when laser is enabled in menu)|
Factory Reset| Holding the PIT button to power on camera, enter camera men
u–>”Factory Reset”|
PTT
Menu page| Press the Menu button to access menu page|
Playback On Camera| Press the Return button to access the Playback page|
Charging| Connect USB cable to charger|
Copy Record Files| Connect camera to computer by USB cable|
Playback On PC| Use VLC media player or PotPlayer|
LCD Description
| Icon | Description |
|---|---|
| Battery level | |
| Camera ID User ID | |
| Camera system date and time | |
| Available memory/Total memory | |
| Video record resolution/Frames |
Set Time
Press the“Menu” button to enter the camera’s menu–>”Setting Time”,press“Up”and“Down”button to change the time number under the cursor,press“Snap”and“Audio Record”button to move the cursor.
Set Time zone
Press the“Menu”button to enter the camera ’smenu–>”Timezone”,choose your country and your city to set camera’stimezone.
U- disk Authority
Press the“Menu”button to enter the camera ’s menu–>”U-Disk Auth”,switch the setting to“On”to enableU-Disk authority,which means when camera connects to PC,it needs password to access the camera’s memorycard.(Default password:888888)
Indicator
| LED Indicator | Colour | Description |
|---|---|---|
| Indicator® | Blue | ON: Charging complete |
Twinkling: Charging
OFF: Not charging
Indicator®| Green| Twinkling slowly: Idle
ON: Live streaming or menu operating
Red| ON: Video recording in progress
Yellow| ON: Audio recording in progress
Troubleshooting
Q:What software should I use to playback the camera’s recorded MP4 files?
A:We recommend to use the “VLC media player” or “Potplayer” to playback the video files. Both of the players software are available for downloading on internet.
Q:Will the camera stop recording when the memory card is going to be full?
A:By default the camera is in overwrite mode, when the memory card is running full, camera will keep recording. The earliest files will be overwritten when the memory card is full.
Q: How many hours can a 64GB memory card to save for recording?
A:Normally the recorded file size is around 1.2GB per hour for the camera recording, so a 64GB memory card can save about 53 hours of recording.
Q: Can the camera turn on IR automatically when ambient illumination is getting low?
A: When the “IR Switch” was set to “Auto” in camera’s menu, then camera can turn on IR automatically when ambient illumination is getting low.
Q: What if I forgot camera’s password?
Contactus:
Email: amazon@szest.com
Tel:+8675526503848