Metra AV CS-DACA Digital to Analog and Digital with Arc Converter Instruction Manual
- June 12, 2024
- MeTra AV
Table of Contents
Metra AV CS-DACA Digital to Analog and Digital with Arc Converter
Dear Installer,
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
FEATURES
- Support HDMI ARC/Toslink/Coax digital audio input;
- Support Toslink/Coax/Analog 3.5mm jack/L&R audio output;
- Support slide switch audio input source;
- Support digital audio output: DTS/Dolby-AC3/LPCM;
- Support analog audio PCM2.0,sampling rate 32-192KHZ, 16-24bit;
- Support digital audio max CH5.1 , 96KHZ, 16-24Bbit;
- Support AC 100-240V 50/60hz power, DC 5V/1A;
SPECIFICATIONS
Operating Temperature Range | o to +40 (+32 to +104 🙂 |
---|---|
Operating Humidity Range | 5 to 90%RH (No Condensation) |
Connectors Input
| 1xPower DC 5V 1xHDMIARC
1xToslink
1xCoax
Connectors Output
| 1xToslink 1×3.5mm jack 1xUR audio out
1xCoax
Audio format| PCM2.0, DTS/Dolby-AC3/LPCM Max CHS.1
Power consumption| 3watts(Maximum)
Dimension (LxWxH)| 96.2×47.6x21mm
Net Weight| 140g
Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.
PACKING CONTENTS
- Main Unit. Digital & Analog Audio converter
- Operating ‘Instructions
- Power adapter DC 5V 1A x1 PCS
PANEL DESCRIPTIONS
- DC SV power
- Red power light
- Slide switch
- HDMI ARC input
- Optical Toslink input
- Coaxial input
- Optical Toslink output
- Analog 3.5mm out
- Analog R/L audio out
- Coaxial output
For Slide switch:
A:Switch to HDMI ARC audio input;
T:Switch to optical Toslink audio input;
C:Switch to Coaxial audio input;
Connection Diagram Application 1 :
Power Supply
CONNECTING AND OPERATING
- Connect the audio source output into CS-DACA with audio cable or HDMI cable from ARC input of TV if using ARC de-embedding,
- Connect the output of CS-DACA into desired audio input device.
- Connect power adapter in to the transmitter.
NOTE: Insert/Extract cables gently.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or solvents to clean this unit.
PRODUCT SERVICE
-
Damage requiring service:
The unit should be serviced by qualified service personnel if:
(a) The DC power supply cord or AC adaptor has been damaged;
(b) Objects or liquids have gotten into the unit:
(c) The unit has been exposed to rain;
(d) The unit does not operate normally or exhibits a marked change in performance;
(e} The unit has been dropped or the cabinet damaged. -
Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.
-
Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics. as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
-
Safety check~ After repairs or service, ask, the servicer to perform safety checks to confirm that the Unit fs in proper working condition.
Customer Support
@2021 Metra AV
460 Walker Street, Holly Hill, FL 32117-2699
Specifications are subject to change without notice.
All trc1demarks are the property of their respective owners.
386-255-0234
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>