KTKUDY-PG-GIFT-Steel-04 Electric Grinder User Manual
- May 15, 2024
- KTKUDY
Table of Contents
KTKUDY-PG-GIFT-Steel-04 Electric Grinder
Product Information
Product Description: Electric Grinder with various features including a Charging Port, LED Indicator, On/Off Button, Upper Body, Container, Lower Body, Cover, Adjuster, and Light.
Specifications
- Product Dimensions: Not specified
- Product Weight: Not specified
- Battery Type: 500mAh Lithium battery
- Battery Life: Grind pepper for 20 minutes when fully charged
- Input Voltage/Power: DC 5V 10W
- Charging Time: 1 hour
- Container Capacity: 46g Pepper – MediumVersion, 66g Pepper – Large Version
- Noise Level: Not specified
Product Usage Instructions
Recharging Your Grinder
- To refill, hold the bottom part and twist the top part to the left. Lift the top part when the arrow aligns with the unlock icon.
- Fill the container with salt or pepper, replace the top portion, and lock it in place.
- Remove the cover and rotate the adjuster to set the grinding coarseness according to your preference.
- Press and hold the button until you obtain the desired amount of ground seasoning. Release the button to stop the grinder.
Troubleshooting
Caution: If the light at the powder output location of the grinder is not functioning, it may be due to improper installation of the upper and lower parts. Ensure proper alignment and engage fully.
If the pepper grinder won’t adjust to a finer setting, try inverting it to clear any blockages in the grinder cores. Ensure the battery is fully charged before troubleshooting.
If the grinder does not operate when the start button is pressed, check for blockages in the grinding core or contact after-sales service for assistance.
Caution: Use only a USB Type A to USB Type C charging cable to avoid operational issues. Contact support for any issues not listed in troubleshooting.
Frequently Asked Questions (FAQ)
Q: What should I do if my grinder is not charging?
A: Ensure you are using a USB Type A to USB Type C charging cable.
Contact support if issues persist.
Q: How do I adjust the coarseness of the grind?
A: Rotate the adjuster on the grinder to set the grinding coarseness
according to your preference.
Q: How long does it take to charge the grinder fully?
A: The charging time for a full charge is approximately 1 hour.
Important Safety Information Inside!
Read all instructions before using.
Use only as directed.
IMPORTANT SAFETY GUIDE
When using electrical appliances, always follow basic safety precautions, including the following:
- Do not submerge the appliance in water or any other liquid, as this may cause personal injury and/or flammable fumes.
- To protect against fire, do not operate the unit near hazardous materials or in extreme temperatures.
- This product is intended for normal domestic household use only. Use the grinder exclusively for its intended purpose.
- For indoor use only. Do not expose this product to rain or other extreme conditions.
- Never force the grinder to tighten or twist, or attempt to speed up the mechanism.
- Do not attempt to disassemble the product by yourself, as this will void the warranty.
- Keep your workspace free from potential hazards while recharging the electric grinder.
- This product is designed for grinding pepper and salt only. Do not use for other purposes.
- Keep the grinder out of the reach of children.
PRODUCT DESCRIPTION
- Charging Port
- LED Indicator
- On/Off Button
- Upper Body
- Container
- Lower Body
- Cover
- Adjuster
- Light
RECHARGING YOUR GRINDER
Before using your grinder for the first time, we recommend charging it for 1 hour. Follow these instructions for recharging:
- Place your grinder on a flat table, ensuring it is firmly in an upright position.
- Plug one end of the USB cable into the charging port on the top of the grinder and the other end into a USB Type A receptacle.Ensure the connections are fully engaged.
- While charging, the white LED on the upper body will light up and blink slowly. When fully charged, the LED will stop blinking.
- If not in use for an extended period, charge the battery to 50%-80% capacity every 3 months.
HOW TO USE
-
To refill, hold the bottom part and twist the top part to the left.
Lift the top part when the arrow aligns with the unlock icon. -
Fill the container with salt or pepper, replace the top portion, and lock it in place.
-
Remove the cover and rotate the adjuster to set the grinding coarseness according to your preference.
-
Press and hold the button until you obtain the desired amount of ground seasoning. Release the button to stop the grinder.
TROUBLESHOOTING
CAUTION: If the light at the powder output location of the grinder is not functioning, it may be due to the upper and lower parts of the grinder not being properly installed, causing poor electrical contact for the light. When installing the upper and lower parts of the grinder, ensure the triangle icon aligns with the lock icon, and apply a little extra force to ensure they are fully engaged.
If the pepper grinder won’t adjust to a finer setting, spices may be blocking
the grinder cores. Try inverting the grinder, turning it on to clear the
cores, and then adjust to a finer setting while still upside down. The
adjuster on the grinder can be rotated multiple turns to vary between the
finest and coarsest grind settings.
The circular marker at the bottom is simply an indicator for the direction of
coarseness adjustment.
If the grinder does not operate when the start button is pressed, please
charge the grinder.
After confirming that the battery is fully charged,if the machine still does
not operate normally, do not force it to avoid damaging the machine.
Next, check whether the grinding core in the grinding section is blocked by
any debris. If there is any blockage, clear the debris or adjust the
coarseness knob to the maximum before attempting to start the machine again.
If the machine still does not work normally after the above operations, please
contact our after-sales service for further assistance and repairs at
service@ktkudy.shop.
CAUTION: Please note that this grinder is only compatible with a USB Type A to USB Type C charging cable. Using a cable with both ends as USB Type C may result in the grinder not being able to charge or operate correctly. To ensure the best performance and user experience of the grinder, we recommend that you use the correct type of charging cable.
For issues not listed here, don’t self-repair as it could void your warranty. For assistance, reach out to us at service@ktkudy.shop
SPECIFICATIONS
Product Dimensions | 46g Ø48*196mm |
---|
66g Ø55*191mm
Product Weight| 46g 365±10g
66g 375±10g
Battery Type| 500mAh Lithium battery
Battery Life| Grind pepper for 20 min when
fully charged
Input Voltage/Power| DC 5V 10W
Charging Time| 1 hour
Container Capacity| 46g Pepper – Medium Version
66g Pepper – Large Version
Noise Level| <60 dB
PACKAGE INCLUDES
Electric grinder x 2 | Velvet bag x 2 |
---|---|
USB cable x 1 | Cleaning brush x 1 |
Carrying rack x 1 | Rack handle x 1 |
Manual x 1 |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>