TELE2 WIFI HUB C4 Router Front Installation Guide
- May 15, 2024
- TELE2
Table of Contents
TELE2 WIFI HUB C4 Router Front
Product Information
Congratulations on a Good Choice!
As soon as you have installed the equipment, you’re ready to start surfing.
Package Contents
- Router
- Documentation
- Network Adapter
- Network Cable, 1.5 m
- Modem Cable, 3 m
- Label with wifi-info
Before You Start Installation
Check the contents of the package before starting the installation to
ensure everything is included.
Lights on the Front
When starting up your router, several lights will flash/blink green. When
the router is ready to be used, the internet light will be lit. After a while,
all lights except for the Status light (at the bottom) will turn off.
Specifications:
- Product Name: TELE2 WIFI HUB C4
- Model: UNBR0440039 01
- Includes: Modem cable (3m), WiFi info label
- Features: LAN ports, Status indicator lights, WPS button for WiFi connection
- Manufacturer: Tele2
| Light | Function |
|---|---|
| Wifi 2.4 GHz | Shows activity for 2.4 GHz network |
| Wifi 5 GHz | Shows activity for 5 GHz network |
| Network | Indicates network connection |
| Uplink | Indicates uplink status |
| Internet | Indicates internet connectivity |
| Telephony | Indicates telephony status |
| LAN | Indicates LAN ports status |
| Status light | Bottom light indicating power/status |
Product Usage Instructions
Installation Guide:
- Connect the modem cable to the Tele2 outlet.
- Plug the other end of the modem cable into the designated port on the TELE2 WIFI HUB C4.
- Power on the device and wait for the status lights to indicate a stable connection.
WiFi Connection:
To connect to WiFi:
- Locate the WiFi information label on the device.
- Use the provided WiFi details to connect your devices to the network.
- For quick setup, press the WPS button on the TELE2 WIFI HUB C4 to establish a secure WiFi connection.
Note:
Menu options may vary between manufacturers and models. Contact Tele2
Customer Service at 90 444 or visit
www.tele2.se/foretag for further assistance.
How to Install Your Broadband Easily
- Unscrew any dust cover that might be covering the DATA port in your Tele2 socket on the wall.
- Connect the modem cable to the DATA port on the router marked COAX, and the other end to the DATA port.
- Connect the power adapter to the POWER port on the router and plug the other end into an electrical outlet.
- If everything is connected correctly, the front lights will start flashing. After a while, the status light will remain lit. The first time the router is started, it may take up to 10 minutes before it is ready to be used.
- If you wish to use wifi, follow the guide on the next page.
- You can also connect a device, such as a computer, media server, or network printer, to your router. You can do this by using any of the yellow LAN ports on the back of the router with a network cable. The LAN port supports link speeds up to 1 Gbit/s.
Guide for Wireless Connection
Wifi Information
- The network name for your wireless network you will connect to is in the format Tele2_xxxxxx, where xxxxxx is your unique name.
- You will find the wireless network name (“Wifi-name”) and password on the label attached to the back of your router.
- Simply connect to the wifi network by scanning the QR code found on the label with the wifi information, also on the back of the router, with a smartphone.
- If you have a device that supports WPS, such as a wireless printer, you can connect without entering a password by using the WPS button.
For the Fastest Possible Wifi
To achieve the highest possible wifi speeds, it is important to use devices that also use the latest wifi technology, such as wifi 6 / 802.11ax or newer. If you have older equipment, it may not be as fast.
Tips for Strong Wifi Signal
Think about placing your router in a central location at home so the
antennas can transmit in all directions and as centrally as possible for the
best signal. Keep distance from the router to avoid weak signals.
Test your broadband speed on the independent site Bredbandskollen.
Wifi Connection
Follow the specific instructions for your device to connect to the wifi network.
iPhone and iPad
- Tap on “Settings”, then choose “Wifi”.
- Make sure the switch at the top is set to “On” (green).
- Tap on the wifi network you want to join.
- Enter the wifi password and select “Join”.
macOS
- Click on the Airport icon at the top right corner of the screen to display available wireless networks.
- Click on the wireless network you want to join.
- Enter the wifi password and press “Join”.
Windows 10
- Right-click on the wifi icon in the taskbar (bottom right corner).
- Choose “Network settings”.
- Click on the wifi network you want to join.
- Enter the wifi password and press “Connect”.
Android
- Open “Settings” and select “Wi-Fi”.
- Tap on the wifi network you want to join.
- Enter the wifi password and select “Connect”.
Menus may vary between different manufacturers and models.
Contact Information
For further assistance, contact Tele2 Customer Service at 90 444 or visit
Tele2 Företag.
FAQs
How do I reset the TELE2 WIFI HUB C4 to factory settings?
To reset the device, locate the reset button usually found on the back or bottom of the router. Press and hold the reset button for about 10 seconds until the status lights flash, indicating a successful reset.
Can I change the WiFi network name and password?
Yes, you can customize the WiFi network name and password by accessing the router's settings through a web browser. Refer to the user manual for detailed instructions on changing network settings.
How do I find my unique wifi network name?
The network name is labeled on the back of your router, in the format Tele2_xxxxxx.
What if I have devices that do not support the WPS feature?
You can manually enter the wifi password which is found on the label with the wifi information, also on the back of the router.
Can I use older devices with this router?
Older devices can be used, but they may not achieve the maximum available speed.