NUU Wake Waterproof Bluetooth Speaker-Complete Features/Instruction Guide
- June 4, 2024
- NUU
Table of Contents
- NUU Wake Waterproof Bluetooth Speaker
- Specifications
- Introduction
- GETTING STARTED
- Bluetooth Status LED
- On/Off Button
- TO PAIR THE WAVE WITH YOUR BLUETOOTH DEVICE
- Volume Up Volume Down
- WATERPROOF & DUSTPROOF PERFORMANCE
- Frequently Asked Questions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NUU Wake Waterproof Bluetooth Speaker
Specifications
-
Product Dimensions
4 x 4.3 x 13 inches -
Item Weight
3.3 pounds -
Batteries
1 Lithium Ion batteries -
Speaker Type
Outdoor -
Connectivity Technology
Bluetooth, USB -
Special Feature
Ultra-portable, Waterproof -
Brand
NUU
Introduction
Sandproof, Waterproof, and Stress-Free (IP57 Rating) The ideal outdoor buddy is Wake! This Bluetooth speaker will transport your music everywhere you choose to take it because it is tough, waterproof, and designed to handle adventures. Outstanding, powerful sound Sound quality is not affected by a tough design. The combination of two 10W speaker drivers, DSP to enhance bass performance, and a passive bass radiator enables it to produce big sound with robust bass that travels far.
Durable Design Wake is not only extremely strong and designed to withstand the harshest situations, but it also looks great. It is specifically made for active lifestyles thanks to its tough housing, protective rubber coating, and an incorporated handle. The necessity to carry along different batteries or potentially tangled connections is removed by Wire FreeWake. Bluetooth audio streaming is safe with Wake. internal battery to keep you operating without wires all day. Listen for up to 7 hours thanks to an internal rechargeable Li- ion battery.
GETTING STARTED
- Bluetooth Status LED
- On/Off Button
- Action Button
- Volume Up
- Volume Down
- Battery Status LED
- USB Charge Port
- DC Input
- 3.5mm AUX-IN
- Micro USB Input
(NUU Service Technician use only)
Bluetooth Status LED
This is a small LED next to the On/O switch that illuminates to show the current status of the Wave’s Bluetooth connection.
- Flashing Slowly and Intermittently: The Wave is on and is not in pairing mode. This is also the indicator for “auto-reconnect”, where the Wave attempts to connect with the last paired Bluetooth device immediately after it is powered on.
- Flashing Quickly and Steadily: Pairing mode.
- Solidly Lit: Paired and connected.
On/Off Button
Press and hold the button for ~3 seconds to turn the NUU Wave on. You will hear a two-tone (low-high) sound, indicating that the speaker is on.
Off
Press and hold the button for ~3 seconds to turn the NUU Wave off. You will
hear a two-tone (high-low) sound, indicating that the speaker has been
switched off.
Auto-of
After 30 minutes of inactivity, the NUU Wave will shut off automatically.
To turn the Wave on again, Press and hold the button for ~3 seconds. The NUU
Wave will not automatically shut off if you are playing audio through
Bluetooth, 3.5mm connection, or are charging a device with the USB port.
NOTE
The Bluetooth Status LED will light when the Wave is on, and go dark when
it is off .
TO PAIR THE WAVE WITH YOUR BLUETOOTH DEVICE
- Switch on the NUU Wave. The Bluetooth Status LED will ash slowly.
- Press and hold the Action Button for about ~3 seconds. You will hear a double-beep (low-low) and the Bluetooth Status Light will ash quickly. The NUU Wave is now in pairing mode.
- Enable Bluetooth on your phone or another device.* Then select “NUU Wave” from the list of discoverable devices.
- If prompted for a PIN code, enter “0000” (4 zeros).
- It will take between 10-15 seconds for the NUU Wave to pair with your device. When pairing is successful, you will hear a two-tone (low-high) sound and the Bluetooth Status LED will remain steadily lit.
NOTE
Procedures for activating Bluetooth will vary across devices. Consult the
documentation that came with your phone or another device for further
information.
Volume Up Volume Down
CONTROLLING VOLUME
Press or hold the volume keys / to adjust the volume. The NUU Wave will beep with each change in volume. When you reach maximum volume, you will hear a high-pitched beep. When you reach minimum volume, you will hear a faint low- pitched beep.
NOTE
Volume may only be adjusted while the NUU Wave is either connected to a
Bluetooth device or is connected via the AUX-IN port.
WATERPROOF & DUSTPROOF PERFORMANCE
The NUU Wave is designed to be waterproof and dustproof. Damage caused by misuse, abuse or failure to properly maintain the Wave is not covered by the limited warranty.
- The Wave is IP57 certified and will operate at a water depth of 3 feet for up to 30 minutes.
- Use the Wave in the recommended operating water temperature range of –10°C to +40°C (14°F to 104°F). Do not use in hot springs.
- As for dustproof performance, there is no guarantee that the Wave will not become scratched or dented.
- The accessories supplied do not meet waterproof and dustproof specifications.
Frequently Asked Questions
I was set to buy the Braven BrV-X when I ran across this. Has anyone heard of both? Recommendations needed, please?
I have this speaker and ran across the Braven brv-x while on the river. The Nuu Wake is much louder and has more functionality than the other. They both are equally waterproof, as my Nuu Wave has been on my ranch in the summer, the river rapids in the spring, and skiing on the lake and the mountain with me for 3+ years. The sound quality is loud and full. It is good enough. By the time you account for all the different instances of audio compression by the time it gets to your ears, and the environmental degradation, the speakers only need to meet a certain quality. This speaker does that in spades.
How far away from the blue tooth device can you be before it starts breaking up?
right around 30 feet, or 10 meters for your metric chaps.
Does the Nuu have controls to skip to the next/previous track on the paired device? And do the volume buttons control the speaker or the device?
The Nuu does not have the control to skip to the next or previous track on the paired device. The volume buttons control the speaker and not the device.
Approximate battery life at full volume?
10 hours
Can you connect other audio equipment to it-does it has an aux-in jack?
Yes, it has an Aux-in jack.
I need a replacement power cord for this. Where can I find one?
When I lost the power cord for my speaker, I called customer service on the company’s website and they sent me a replacement cord free of charge. However, they may try and make you pay for it, or at least the shipping costs.
How can I tell when the battery in my Bluetooth speaker is full?
A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.
How can Nuu’s wake be reset?
On your phone or another device, then back on. Remove the NUU Wake from the list of discoverable devices and restart the pairing procedure if the NUU Wake still won’t pair.
How can I restore the factory settings on my Bluetooth speaker?
You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.
My Bluetooth speaker is charging, but can I use it?
Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.