ACME BH203 Bluetooth Earphone User Manual

ACME BH203 Bluetooth Earphone

Warranty card

• Product Product model
• Product purchase date Seller name, address
• Failures (date, description, position of the person who accepts the product, first name, last name and signature)

1. Warranty period
   Warranty enters into force starting with the day when the buyer acquires the product from the seller. Warranty period is indicated on the package of the product.

2. Warranty conditions
   The warranty is valid only by providing an original document of the product acquisition and this warranty sheet, which includes name of the product model, product purchase date, name and address of the seller.
   If it is noticed during the warranty period that the product has faults and these faults where not caused by any of the reasons when the warranty is not applied as indicated in the paragraphs below, manufacturer undertakes to replace the product.
   The warranty is not applied to regular testing, maintenance and repair or replacement of the parts which are worn out naturally.
   The warranty is not applied if damage or failures occurred due to the following reasons:

   • Inappropriate installation of the product, inappropriate usage and/or operating the product without following the manual, technical requirements and safety standards as provided by the manufacturer, and additionally, inappropriate warehousing, falling from heights as well as hard strikes.
   • Corrosion, mud, water and sand.
   •  Repair works, modifications or cleaning, which were performed by a service not authorised by the manufacturer.
   • Usage of the spare parts, software or consumptive materials which do not apply to the product.
   • Accidents or events or any other reasons which do not depend on the manufacturer, which includes lightning, water, fire, magnetic field and inappropriate ventilation.
   •  If the product does not meet standards and specifications of a particular country, in which it was not bought. Any attempt to adjust the product in order to meet technical and safety requirements such as those in the other countries withdraws all the rights to the warranty service. If no failures are detected in the product, all the expenses in relation to the service are covered by the buyer.

Bluetooth earphones

Technical specifications:

• Type: In-ear
• Frequency response: 20–20 000 Hz
• Driver size: 40 mm
• Sensitivity: 94dB+/-3dB
• Connections: Micro USB, Bluetooth
• Bluetooth version: V4.2
• Working distance (Bluetooth) : up to 10 m
• Power supply: micro USB, 5 V DC
• Battery: Li-ion
• Charging time: up to 2 hour
• Standby time: about 30 hours
• Playback time: up to 11 hours
• Talking time: up to 11 hours
• Weight: 200 g

WARNING : Listening at a high volume or a long time may damage your hearing.

Product overview

1| Volume up / Next

track button

| Press the button to increase the volume; press and hold the button to go to the next track. When the max. volume is reached, an indication sound will be heard.
---|---|---
2| Volume down / previous track button| Press the button to reduce the volume; press and hold the button to go to the previous track.
3| Power (Multi-function) button| Power on: Press and hold the button for 3 seconds. Power off: Press and hold the button for 3 seconds. Answer phone call: Press the button once.
Reject phone call: Press and hold the key for 2 seconds End call: During a phone call press the button once.
Redial last phone number: Press the key twice.
Play/Pause: press the button once to pause the multimedia playback; press again to resume.
4| Micro USB charging port| To charge the battery, use the charger with a USB port and Micro USB cable.
5| Microphone| For voice communication
6| LED Indicator*| Shows the status of earphones.
7| 3.5 mm audio input|

These headphones are equipped with a built-in non-detachable rechargeable battery. Please ensure that the battery is fully charged before using the headphones for the first time. A solid red LED light indicates when the battery is charging. When the charging is complete, the LED light will turn blue. The typical charge time for an empty battery takes up to 1 hour. If you do not use the device for a long period of time, please charge it once every 2 months
Li-Ion/Pi-Po batteries exhibit a gradual decrease in performance over their service life, so a reduction in the initial battery capacity is not an indication of a faulty battery or device.

Pairing process and LED indications

• Power on your headphones by pressing Power button for 3 seconds. A fast blinking red/ blue LED will indicate that the headphones are ready to pair.
• Turn on the Bluetooth function on your device, select BH203 from the list and pair the headphones.
• A continuously glowing blue LED will indicate that your device has been successfully paired and the headphones are ready to use.
• When sound is being played through headset – a blue LED blinks every 5 seconds.
• If the headphones are disconnected and not used for 5 minutes, the headphones will automatically turn off.to avoid damage to the battery.

Troubleshooting:

that “Media playback” is enabled in your Bluetooth settings.
Make sure your device has an “A2DP” Bluetooth profile.
Bluetooth device will not reconnect/ pair with the headphones|

1. Open the Bluetooth settings on your device, tap “BH203” and
   select “Forget”. Now you can try the pairing operation again.

2. It is possible that you are not able to connect because the Headphones are paired with another nearby device. You will have to disconnect the other device, or even turn off its Bluetooth function. Now you can try again to pair or reconnect.

3. Turn on/off the Bluetooth function in your device or restart the device itself (not the headphones).

Care and maintenance

• Don’t use abrasive cleaning solvents to clean the headset.
• Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don’t dispose of the headset in a fire as it will result in an explosion.
• Don’t expose the headset to contact with sharp objects as this will cause scratches and damage.
• Don’t let the headset fall down onto the floor. The internal circuit might get damaged.

Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect contact your local authority, your household waste disposal service provider or the shop where you purchased the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>