Senhozi SE-0002-BK Black Handheld Bidet Sprayer for Toilet Instruction Manual

Senhozi SE-0002-BK Black Handheld Bidet Sprayer for Toilet

Product Specifications:

• Part Name: Faucetin Body
• Material: Brass
• Standard Accessories:
  • 1 x Brass Connector
  • 1 x NPT 1/2 Brass Connector
  • Installation Accessories (Screws)
  • Handle Accessories
  • Decoration Plate
  • Bidet Shower
  • Shower Hose
  • Teflon Tape

Product Usage Instructions

Accessories Checking:

Check the standard accessories list provided. Note any changes without prior notification that do not affect usage.

Installation Steps:

1. Essential Dimension Diagram:

Refer to the diagram to measure the position of the mixer and identify the self-tapping rubber in the wall after drilling a hole.

2. NPT Accessories Installation:

Roll several cycles of Teflon tape on NPT accessories, then connect them to the hot and cold water pipes.

3. Decoration Plate Installation:

Insert the decoration plate into the faucet body as shown in the image.

4. Shower Hose and Bidet Shower Installation:

Securely attach the shower hose to the bidet shower and shower connector according to the provided image.

5. Brass Connector Installation:

Place the brass connector into the shower holder following the image guide.

6. Handle Installation:

Install the handle into the cartridge as shown in the image.

Main Installation Instructions:

1. The main body is pre-loaded in optimal condition from the factory; do not unload it yourself.
2. Prior to installation, clean any mud and impurities from the water pipes.
3. After installation, check for any leakages in the connection parts.
4. Ensure water pressure is between 0.05-1A for both cold and hot water, with a temperature range of 4°C-90°C.
5. The faucet must be correctly connected to the running water pipes, with the front part facing forward, left side connected to hot water, and right side to cold water.

Frequently Asked Questions

Q: How do I contact for any questions about the product?

A: For any queries, please contact us via senhozi@outlook.com.

INSTALLATION INSTRUCTION

Accessories Checking:

LIST OF THE STANDARD ACCESSORIES.

1. Notes: 1. Any new changes without pre-notifications if without influencing your usage.
2. The pictures in this drawing are only for your reference, the products appearance should be in accordance with the real ones.

Installation Instructions

1. The main body is in best situation before leaving the factory, please do not un-load it by yourself;
2. Before installation, please do clean the mud and the other impurities in the running water pipes;
3. Afer installation, please double-check if any leakages in the connection parts;
4. The water pressure shoule be 0.05-1枷a(for cold &hot water),the temperature:4″C-9O”C;
5. The faucet must be connected with the running water pipes correctly, that is , facing the front part of the faucet, the left side should be connected to hot water, right side to cold water.

Installation Step

1. Refer to the essential dimension diagram to measure the position of Mixer, and know the self-tapping rubber in the wall after drilling hole (see image).

2. 2A: Please roll some cycles of Teflon tape of NPT accessories and then connector into inlet hot water pipes and cold water pipes (See image).
   4B: As the image shows, no need to put NPT accessories (see image).

3. 3A: Put the decoration plate into the faucet body (see image).
   3B: Put brass connector into shower holder (see image).

4. 4A: Fix well shower hose with bidet sh叩er and shower connector (See image).
   4B: Installation the handle into the Cartridge (see image).

Application Instruction

1. Turn on the water supply, and check all joints and connections for leaks.
2. The usage of handle:
   • A) The lift handle will turn on the faucet, the wider the lifting angle, the stronger the water flows or vice versa. See Fig 1.
   • B) When the handle is lifted, rotating the handle lever towards left will allow greater hot water flows, and rotating the handle lever towards the right will allow greater cold water flows. See Fig 2.

Essential Dimension Diagram

Our company along enhance and improve its product design and performance policy unceasingly; And retain to its product specification change authority, Do no inform at the appointed time.

Care And Maintenance

In order to maintain faucet surface bright and clean please frequently or regularly clean the faucet.

• Wash the faucet with clean water, and wipe with soft cloth.
• Avoid using cleaning powder, harsh cleaning chemicals, brushes, and cloth with coarse surfaces to prevent scratching and corrosion.
• Do not use acidic cleaning agents for washing the faucet as it may cause corrosion on the surface of the faucet. Rinse off with water immediately if the faucet in contact with harmful acidic agents. When use, please do not pull the shower hose forcibly, in order to avoid the hose cracks. If must carry on the massive clearing, please obey the following procedure:
  1. Use clear water and a soft cloth, to eliminate the superficial dirt and the filthy membrane as soo as possible;
  2. Uses the following cleanser to remove the superficial dirt and filthy membranes;
• Temperate liquid cleanser;
• The colourless glass cleaner does not have the powdery cleanser which an abrasive action and can dissolve completely (according to the instruction mix).
• Polish liquid which does not have abrasive action.
• After cleaning, please remove the complete cleansing agent with clear water, and wipe by soft cotton fabric.
• If you have any questions, please contact us via senhozi@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>