PENNINGTON 1051613_7 Aquagarden Pond Half Moon Mocha Instruction Manual
- May 15, 2024
- PENNINGTON
Table of Contents
PENNINGTON 1051613_7 Aquagarden Pond Half Moon Mocha Instruction Manual
ASSEMBLY INSTRUCTION
Getting to know your Raised Window Pond Half-Moon
Step by Step Guide Estimated assembly time: 1 hour
Part Description| Quantity| Part
No.
---|---|---
Tool| 1| 1
Plosiic key| 24| 2
Ploni basks fixing Pn| 6| 3
Lea Feet| 6| 4
Hog Moon Liner| I| 5
Underlay| I| 6
135 Degree Lee| 4| 7
90 Degree leg| 2| 8
Book Top Rd (C)| I| 9
Side Top SIM| 2| 10
FlOrt Top Rd IA)| 3| 11
Bock lee Crass Broce1C)| 1| 12
Side tee C1013 Brace (131| 2| 13
Front Leo Cross Brace (A)| 2| 14
Tension Bar| 1| 15
135 Degree Triden C011110C101| 4| 16
90 Degree Trideni Conneder| 2| 17
Ploni Basket| 1| 18
Windfall Clips| 2| 19
Waterfall| 1| 20
Waterfall hose| 1| 21
Macho Weave back Panel ICI| 1| 22
Mocha Weave hock Pond 18)| 2| 23
Mocha Weave bock Panel 1A1| 3| 24
Step 1
Please remove all of the relevant parts from the packaging and double check
that all of the items are enclosed, use the complete parts list and the
exploded diagram to check this.
Step 2
Identify a suitable area where your window pond can be placed, ensure that the
area is level with a firm base and is free from stones or any other debris
that could damage your liner bag.
Step 3
Using your supplied underlay (part 6) lay it flat over the cleaned area
ensuring it covers the entire area where the liner will sit. Underlay is very
important as it protects your liner bag from puncture or damage and prevents
any possible unwanted leaks.
Step 4
Now using the all the top rails (parts 9, 10 & 11) and all the trident
connectors (parts 16 & 17) connect them together into a halfmoon shape, each
top rail is labelled to help aid you in correct construction. The trident
connectors in image 1 & 2 allow the top rails to slot into each other, ensure
the bottom oval hole is completely free.
The top rails are labelled A, B & C as per image 4 and should fit together as per image 3 at the end of this step.
Step 5
Using the legs (parts 7 & 8) insert them into the trident connectors as per
images 1 and 2. Ensure the end of the leg with the white sticker is not
inserted first but are located at the top of the leg once inserted and lined
up with the oval holes. The two 90 degree legs fit the 90 degree trident
connectors and the 135 degree legs for the 135 trident connectors, see the
image on step 6 for reference.
Step 6
Your window pond should now have all 6 of the legs inserted the right way up
and be ready to have the plastic keys (part 2) inserted at the bottom of the
top rails. It should look like the image below with all 6 legs inserted.
Step 7
This step requires you to use 12 of the plastic keys (part 2), insert them
into each of the oval holes at the base of all the tridents on both sides, 2
per trident. Image 1 shows the first keys being inserted into the oval holes.
The oval holes must not be covered but be completely free and open to ensure
the keys can fit in easily. Continue to insert all 12 keys.
Now using the supplied tool (part 1) turn the keys a quarter turn so lay flat and lock into position as per image 3. Continue to do thisto all 12 keys around the base of the pond until all 6 legs are firmly connected to all 6 trident connectors.
Note: the tool has 2 ends to allow for easy tightening of the 90 degree and 135 degree connectors.
Step 8
Now would be a good time to look at the exploded diagram and take note of the
position of each of the windows on the liner bag (part 5). As all 3 windows
are positioned at the front of the halfmoon, you must make sure all 3 window
panels (part 24) are positioned at the front as per the exploded diagram.
The panels are divided between A, B & C which help guide you on which panel needs to go where.
Identify the window panels first, labelled A (part 24) and slot them into the correct legs, see exploded diagram. You will have to use two hands and slot both sides of the panel at the same time to ensure it fits easily and correctly between the legs to the bottom rail. Ensure the window frames are facing outwards and are slotted into the legs the right way by looking at image 2.
Labels on the panels which have “to the inside” on them means that the side of the panel needs to face towards the inside of the pond.
Tip: When sliding the panels into the curved slot sections on the legs ensure the panels are wet with water. This will aid the slotting process of all the panels into the legs.
Step 9
Once all of the panels have been inserted your pool should look like the image
below.
Step 10
Now using the leg cross brace bars (parts 12, 13 & 14) and 12 of the remaining
plastic keys (part 2) insert them one at a time, working your way around the
pond leaving one window panel empty. Lock the plastic keys by quarter turning
them, using the provided tool (part 1).
Once all the leg braces have been inserted and the keys locked the panels of your Window Pool should be pulled tight as per image 2 below.
Step 11
Once the 5 leg cross bracing bars are in position, it is time to insert the
tension bar (part 15). Adjust the angle of the bar to match the remaining gap
in the frame and insert the remaining two plastic keys (part 2) as per image 1
below. Once the keys are in position lock them with a quarter turn using the
provided tool (part 1), then apply pressure to the tension bar to make it
straight as per image 2 below. With the bar straight, insert a plant basket
fixing pin (part 3) into the remaining empty hole to lock the bar into
position as per image 3 below.
Step 12
Check all parts are secure and correct and then attach the supplied feet (part
4) to the end of the 6 legs. These clip into place easily and ensure the pond
is level and secure. Feet can fit all the 90, 135 legs. See image 1 & 2.
Important:
Before moving on to step 13, ensure all the labels are removed from the
panels, as you will be unable to remove them once the liner bag has been
inserted.
Step 13
Now between two people turn over the Affinity Pool and Insert the Liner Bag
(Part 5). Place the liner Bag inside the Window pool and carefully unpack it
to fit the inside like in image 4 below. You will see that on image 1 that a
hook is present on the trident sections (parts 16 & 17). This enables you to
hook each eyelet of the liner to the hook on the trident connector. Ensure the
liner is positioned with the windows correctly lined up with the windows on
the Mocha Window panels, see exploded diagram for reference.
To be able to hook the liner easily, place the eyelet perpendicular to the top of the hook and slide to the back of the hook before allowing the eyelet to drop down into the groove behind and become secure. Do this to all 6 of the eyelets around the pond. This will leave the 2 eyelets on the back panel empty.
Step 14
Place the Inpond 5 in 1 filter inside the pond and thread the cable between
the liner bag (part 5) and the frame of the pool. Use the section of liner
that you left unattached in step 14, this will help to keep the cable tidy and
out of harms way. Once the cable has been threaded through the gap, attach the
eyelets on the liner bag to the holes on the top rail using 2 of the Plant
basket fixing pins (part 3). See Inpond instructions on how to set up the
filter correctly. Do not turn the Inpond on at this time.
Step 15
With the Inpond filter in place you can now look at installing the waterfall.
To do this clip the Waterfall clips (part 19) onto the top rail either side of
the cable for the filter. See image 1 on the next page for reference.
With the clips attached to the rail, next position the waterfall (part 20) so that the bracket on the back of the waterfall sits in the clips, as per image 3 on the next page. Finally attach the waterfall hose (part 21) to the Inpond filter, you may need to cut the hose to length.
Step 16
Now the window pond is in place, the underlay can be neatly folded and tucked
under the liner bag. Ensure that it’s fitted correctly by slightly lifting up
the pond to allow you to fold and push the underlay under the panels and the
liner bag.
Tip: To help hide the filter cables use the planting basket on the panel where the cables comes through.
Step 17
One planting basket (Part 18) and two planting basket fixing pins (Part 3) are
supplied which can be fitted to panels on the window pond. Each top rail has
two centre holes underneath that allow the planting basket to be pinned in
with the fixing pins supplied. Using a fixing pin, push fit into the hole
attaching the basket into place. If you need to remove a planting basket use a
small flat headed screwdriver on the inside screw head to gently remove from
the fixed position.
Additional baskets are available to purchase individually. Use pond compost to plant your chosen aquatic plants.
Step 18
Once everything has been completed and you are completely happy with the
position of the pond, you can now fill your Window Pond with tap water. Ensure
the tap water has been treated with a water dechlorinate as this will ensure
it’s safe for your fish later. Only fill up the rings on the liner bag rim,
once filled you can turn on your IN pond 5 in 1 filter (please see the filter
instructions for correctly installing the pump/filter, using the lighting and
water features).
IMPORTANT: Due to the volume of your Pennington Aqua garden View Window Pond, we would recommend the use of a pond heater over the winter months, to help prevent it from freezing.
In prolonged spells of temperatures below freezing we would recommend relocating any fish from the pool to a more suitable location.
Warranty
This product is guaranteed against defects in material and workmanship for 2 years from the date of purchase, under normal usage. The guarantee DOES NOT APPLY in case of improper use, negligence, lack of maintenance or accidental damage to the window ponds. If the window ponds fails due to a manufacturing fault within this period it will be either repaired or replaced free of charge. Liability is limited to replacement of the faulty product only; no other costs will be reimbursed.
This guarantee is not transferable and does not affect your statutory rights. This guarantee does not confer any rights other than those expressly set out above. Excludes consumable parts (pump Impellor, LED light & UVC lamp). If any parts are needed, spares are available from your retailer. Please see the Inpond 200 instructions for more information and part descriptions.
To keep your window pond windows clean, use ONLY the delicate window cleaning pads supplied. Any other material may scratch or damage the windows. Polymer Wool Pads supplied are replacements for the Inpond
All-In-One filter, (see instruction manual). All these items are available as
replacements from your retailer. For further information, see our website:
www.PenningtonAquagarden.com.
Consumer Advice Contact Information
Telephone: 1-800-285-7333
Pennington 1280 Atlanta Hwy. Madison, GA 30650
www.PenningtonAquagarden.com
Leaflet Code: 27/09/16
Important
Please attach proof of purchase to this manual and file in a safe place.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>