ONEKING A8 Sports Smart Bluetooth Audio Glasses User Manual

ONEKING A8 Sports Smart Bluetooth Audio Glasses

Product Information

• Sports Smart Bluetooth Audio Glasses
• UV 400
• Lanyard hole with polarized coated lens
• Polarizing coating
• UV400 UV protection
• Block glare
• No polarizing coating for clear vision
• Anti blue light eye protection
• Anti-scratch film
• Impact resistance
• Antifouling Hydrophobic Film
• High transmittance
• Easy to clean and durable

KEY FUNCTION INTRODUCTION

1. Multi-function button
2. Speaker
3. Microphone
4. Magnetic charging
5. Indicator light
6. Touchpad
7. Lanyard hole

With polarized coated lens

USE TECHNIQUE OF LANYARD HOLE

1. Turn to untie the rope chain.
2. Pinch the loop through the lanyard hole of the glasses tripod.
3. Then use the other end to pass through the lanyard loop, and then pull it tight.
4. Rotate and tighten the rope chain.

OPERATING INSTRUCTIONS

• Power on: Press and hold the 1 multi-function button for 3 second until the blue light is on, and you hear the “Power on” prompt.
• Power off: Press and hold the 1 multi-function button for 5 seconds until the red light is on, and you hear the “Power off” prompt.
• Pairing: After the glasses is turned on, it will automatically enter the bluetooth pairing mode; the red and blue lights flash alternately. Turn on the bluetooth of the device to be connected (such as mobile phone, player, etc.), search for and connect to A8. When you hear the “Connected” prompt, the pairing is successful, and you can use the A8 to play music and make calls at will. If the connection fails, A8 will automatically power off after 5 minutes.
• Clear pairing information: Press the 1 multi-function button 5 times in the power-on state, and then enter the pairing mode.
• Automatic connection: If the A8 has already connected to the device, turn on the Bluetooth again and it will automatically connect to the device.
• Play/Pause: Click the 1 multi-function button.
• Volume up: Click the 6 touchpad on the right leg of the glasses.
• Volume down: Long press the 6 touchpad of the right leg of the glasses.
• Previous song: In the music playing state, press the 1 multi-function button three times.
• Next song: In the state of playing music, double-click the 1 multi-function button.
• Answer/hang up a call: In the state of an incoming call or a call, click the 1 multi-function button.
• Rejecting a call: In the state of an incoming call, double-click the 1 multi-function button.
• Voice assistant: In the non-call state, press and hold the 1 multi-function button for 2 seconds to start Siri or google voice assistant (for iphone and most android phones).
• Charging: Please use the original charging cable for charging, the red light is always on when charging, and the red light is off when fully charged.
• Low battery voltage prompt: The red light is on for one second and there is a “Battery low” prompt sound, please charge as soon as possible.

PRODUCT PARAMETERS

• Model: A8
• Bluetooth version: V5.2
• Support protocol: HFP/A2DP/AVRCP
• Transmission distance: ≤ 12 meters
• Speaker type: Dual speakers, stereo
• Music time: 7H
• Talk time: 6H
• Charging time: 1.5H
• Charging input: DC 5V – 1A
• Battery capacity: 145mAh
• Frame material: ABS+PC
• Lens Material: PC/TAC Polarized
• Charging Method: Magnetic charging
• Net weight: 44g

MATTERS NEEDING ATTENTION

• Please use this product according to local laws and regulations, pay attention to safety, and wear this product correctly for driving and riding.
• In order to ensure your safety, please do not listen to music with the volume turned up to the maximum in complex environments.
• Keep out of reach of children as small parts may cause personal injury, choking, etc.
• Pay attention to using this product in places with warning signs in some special places, such as hospitals, gas stations, and any potentially explosive environments.
• Do not place this product in a high-temperature environment (such as in a car), as the battery may explode due to overheating.
• Do not place the magnetic end of the charging cable close to metal objects to prevent short-circuit hazards caused by magnetically attracting metal objects.
• Do not disassemble or damage the internal battery, please dispose of the battery according to local regulations, and do not throw it away to pollute the environment.

MAINTENANCE MATTERS

• When not using this product, please turn off the power.
• Please keep the device dry and do not place this product in a liquid or wet place.
• Before putting away the product, please clean the product to avoid sweat corroding the product.
• Do not hit this product with sharp objects to avoid scratches or damage.
• Do not place the product in an environment where the temperature is too low or too high (below -10°C or above 45°C).

WARRANTY CARD

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>