Phomemo M110 Portable Label Printer Instructions

Phomemo M110 Portable Label Printer

Product Information

• Product Name: Portable label printer
• Product Model: M110
• Printing Technology: Thermal printing
• Effective Printing Width: 20-50mm
• Label Size: 57mm 50mm (Max width Max diameter)
• Supported Consumables: Pre-cut paper, black mark paper, continuous paper
• Print Speed: 20-45mm/s (switchable, level 1-5)
• Printing Density: Switchable, level 1-15
• Printing Resolution: 203 dpi
• Print Head Service Life: 50 KM
• Communication Interface: Bluetooth, Data wire
• Product Size: 113.15 86.5 62.33mm (4.45 3.4 2.45 inch)
• Power Input: 5V 2A
• Power Supply Method: Lithium battery, Data wire
• Supported Operating System: Android, iOS
• Instruction Set: ESC/POS
• Bar Code: 1D bar code & 2D bar code
• Operating Temperature: 5-50°C
• Storage Temperature: -20-60°C
• Operating Humidity: 20%-85%
• Storage Humidity: 2%-95% (Non condensation)

INSTRUCTION

Please read this instruction carefully before using this product and keep it properly

Multilingual detailed instruction manual

Language switching

Click the button to select the language and click the button to switch the language.

Contains three languages

Packing List

The number of paper rolls in the list is subject to the actual shipment

Product Specifications

Product model

Printing technology

| M110

Thermal printing

Effective printing width| 20-50mm
Label size| 57mm φ50mm (Max width Max diameter )
 | Pre-cut paper、black mark paper、
Supported consumables

Print speed

| continuous paper

20-45mm/s(switchable,level1-5)

 |
Printing density

Printing resolution

| Switchable,level1-15

203 dpi

Print head service life| 50 KM
 | Bluetooth
Cinotmermfaucenication Product size| Data wire
113.1586.562.33mm（4.453.42.45inch）
Power input| 5V 2A
 | Lithium battery
Power supply method| Data wire
Android
sSyusptpemorted operating Instruction set| iOS
ESC/POS
Bar code| 1D bar code & 2D bar code
Operating temperature| 5℃～50℃
Storage temperature| -20℃～60℃
 | 20%～85%
Operating humidity

Storage humidity

| 2%～95%(Non condensation)
 |

Product Appearance Introduction

Button function introduction

Continuous click

Click on

| Switchable home menu
|

FBeuettdon

| (pCaopnesruamndabblleascakrme Parke-pcaupte)| Titatkoethaelabbeegli,npnoinsigtiof tahnednaedxtjulastbel Press the paper feed button to
C(Cloicnksuomnable is

continuous paper)

| feed tkheey paanpdesrt,orpeltehaesepathpeerpfaepeedr.

Automatically return to the main

Long press 3s| menu interface.
Continuous click| hThoempeopwageer bmuetntoun, asnwditcahnesbtehuesed

to switch sub-menus.

Component Description

Display settings home menu

14w,1e5a(kDeasrtk)e,2s,t3),4(weak),5,6(Normal),7,8,9,10(Dark),11,12,13,
Print speed Paper gap| 1(Slowest),2(Slow),3(Normal),4(Fast),5 (Fastest)
type

Auto power

| Continuous, Gap,Blackmark

NO Close,5 Minutes,15 Minutes,30 Minutes,1 Hour,2 Hour,

OFF| 4 Hour,8 Hour,24 Hour
Rseetsttionrges

Firmware

| Press the power button to restore
version

device

| Display Firmware version
address| Display device address
Content| State
---|---
Shutting down| Battery lower than 1%
Printing …| Printing regularly
Content| State
---|---
Feeding …| Press Feed button
Hwiagiht temperature, please| The print head is overheated
No Paper …| No paper in the bin or paper is installed incorrectly
The paper cover is opened| The paper cover is opened

Printer Paper Roll Installation

1. Long press the power button for 3
2. Hold both sides of the printer paper compartment cover(both sides of paper outlet) with the hand, and open the paper compartment cover forcefully with a finger cushion upwards
3. Take out the label paper mounting bracket in the paper compartment.
4. Remove the left baffle, put in the label paper roll (label printing side down), and push the left baffle to right.
5. Align the installed label roll holder with the card slots on both sides, and put it into the paper compartment.
6. Pull out part of the paper ( approximately 15mm above the paper exit), and close the paper compartment cover
7. The printer feeds paper automatically to position the gap of label paper, and then the paper roll installation is complete

NOTE: After the first operation or each time you replace the consumables, the printer will automatically feed the paper, so that the printer can position the label to avoid there will be incomplete printing, missing, non- aligned, etc

App Download Method

NOTE

• This product needs to be connected to the printer in the App.
• Due to the requirements of the mobile phone system, the Android mobile phone will use the user’s geographic location when connecting, so the user needs to turn on the GPS and confirm the authorization.

Method I:
Please use your mobile phone to scan the QR code to download the App.

Method II:
Search “Print Master” to download the App.

Printer Connection

1. Turn on GPS.(Android mobile phone only.)
2. Open the App
3. Click to search Connect Now for the device
4. Connect immediately.

NOTE

• When connecting the device to the App, please make sure that your printer is turned on and the Bluetooth of your mobile phone is turned on.
• Due to the requirements of the mobile phone system, the Android mobile phone will use the user’s geographic location when connecting, so the user needs to turn on the GPS and confirm the authorization.

Confirm the Label Size

Method I:
Check the label paper packaging.
Please refer to the actual size used.

Method II:
Use a ruler to measure

FCC Caution

This device complies with part 15 of the F CC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and radiates radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable devices
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

IC Caution

Radio Standards Specification RSS-Gen, issue 5-

• This device contains licence-exempt transmitter(s)/receiver(s) that comply with
• Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:

• The device has been evaluated to meet the general RF exposure requirements.
• The device can be used in portable exposure conditions without restriction

Maintenance Card

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>