ATKTTOP MicAce K95 Wireless Lavalier Microphone User Manual
- June 12, 2024
- ATKTTOP
Table of Contents
MicAce K95
ATKTTOP Wireless Lavalier Microphone
User Manual Please read this user manual carefully
before
using the product and keep it properly.
Product introduction
1. Introduction to Charging Case Functionality
① When charging the charging compartment or charging the Wireless Lavalier Microphone from the charging compartment, the current battery level indicator will be displayed.
2. Receiver Function Introduction
- Charging/Monitoring Ear Return: You can charge the device through this interface using a type-C charging cable. When using a charging adapter for your phone, you can charge both the receiver and the phone simultaneously. If you connect a type-C earphone, you can use it for monitoring and ear return.
- 3.5mm Interface: When recording Vlogs with a camera, connect the camera-specific cable to this interface and the camera.
- Power Button: Press and hold the power button for 2 seconds to turn on the device. The normal and transmitter mode will automatically turn on and pair when you take out the battery compartment. Press the power button 5S times to enter pairing mode. If you need to pair after changing devices, press the button 5 times together with the transmitter. The factory has already paired the device. If it fails to pair within 20 seconds, it will restore the previous pairing.
- Mic 1 Connection Indicator Light: The green light stays on when the receiver is connected to the transmitter with mic 1. It blinks when it is not connected.
- Mic 2 Connection Indicator Light: The green light stays on when the receiver is connected to the transmitter with mic 2. It blinks when it is not connected.
- Charging Indicator Light: When the device is charging, the charging indicator light flashes red. It stays green when fully charged.
- Charging/Transmission: When connected to a phone with an adapter, you can use the phone to record videos or live stream karaoke. The adapter can charge both the receiver and the phone at the same time.
- Touch Point: A touch point occurs when the charging compartment is charging.
Note: Shutdown Reminder: When the battery is low, the device will flash a
red light to remind you.
3. Transmitter Capabilities Overview
- Charging/Monitoring Ear Return: You can charge the device using a Type-C charging cable through this interface. If you connect a Type-C earphone, you can use it for monitoring ear return.
- Power button: Press and hold for 2 seconds to turn on/off the device (it will automatically turn on and pair with the receiver when taken out). Press 5 times to enter pairing mode (you need to press 5 times together with the receiver. The device has been paired at the factory. If you need to pair it when changing machines midway, use this option. If it fails to pair successfully within 20 seconds, it will restore the previous pairing). Single-click to mute/unmute the microphone and light up the screen. Double-click to turn on/off the Bluetooth function of the microphone, and it can be paired and used with a mobile phone.
- Volume/Function + button: Press and hold the volume up button. Single-click to select the function (Noise reduction/Re verberation/Sound card). There are two levels of noise reduction/reverberation and three types of sound card.
- Volume/Function – button: Press and hold the volume down button. Single-click to select the function (Noise reduction/Re verberation/Sound card). There are two levels of noise reduction/reverberation and three types of sound card.
- M Multi-function button: Press and hold the M multi-function button to enter the mode selection (VLOG video/Live broadcast). Short press to select the function (noise reduction/reverbera tion/sound card).
- MIC: Using for voice recording. When using the recording function, please point the MIC towards the sound source.
- Contact: Battery compartment contact.
Note:
- The screen will automatically turn off after 15 seconds of inactivity. Press any button to light up the screen.
- Bluetooth status: When turned on, it will display white, when not turned on, it will display gray.
- Mute status: When turned on, it will display white, when not turned on, it will display gray.
- Shutdown reminder: 4-grid battery display. When the device is running out of power, the red light flashes to remind.
- Recording bar: When recording, it displays white, and when it has not reached the position, it displays gray.
- Once the transmitter and receiver have successfully paired with your current phone, if you need to pair them with another phone, be sure to reactivate them by placing them in the charging compartment before connecting to record audio. Do not directly switch the transmitter and receiver from the current phone to another phone, as this may result in ineffective recording.
Instructions
1. How to connect to phone recording/video:
- Turn on the receiver and transmitter by opening the battery compartment.
- Connect the corresponding adapter and receiver to the phone.
- After turning on the transmitter, select various modes and functions, then open the phone’s recording function or related APP to record videos, etc.
Note: Most Android phones do not support built-in camera recording. (For specific mode and function selection, please refer to the transmitter instructions)
2.How to connect to phone live broadcast:
- Turn on the receiver and transmitter by opening the battery compartment.
- Connect the corresponding adapter and receiver to the phone.
- After turning on the transmitter, select various modes and functions, and connect another phone via Bluetooth as the live broadcast accompaniment. Then, open the live broadcast APP inside the phone to start live broadcasting directly.
Note: After turning on the transmitter, select various modes and
functions, and connect another phone via Biuetooth as the live broadcast
accompaniment. Then, open the live broadcast APP inside the phone to start
live broadcasting directly.
Note: Most Android phones do not support built-in camera recording. (For
specific mode and function selection, please refer to the transmitter
instructions)
3. Method of connecting the camera for audio / video recording:
- First turn on the receiver and transmitter from the battery compartment.
- Connect the corresponding adapter and receiver to the phone.
- After turning on the transmitter, select various modes and functions, and then open the camera to start recording audio and video.
Product Parameters
Directionality: Omnidirectional
Rated input: 5V-0.25A
Frequency range: 2.4G
Standard charging time: about 2 hours
Frequency response range: 20Hz-20KHz
Transmission distance: 656ft
Signal-to-noise ratio: 95DB
Power interface: Type-C
Battery capacity: TX: 450MAH, RX: 400mah
Battery compartment: 2000mah
Working time: Battery compartment: 17 hours, TX: 7 hours, RX: 16 hours
Packing List
- Battery Compartment
- Transmitter
- Receiver
- Manual
- 3.5mm Audio Cable
- 3.5mm Camera Cable
- Charging Cable
- Windproof Microphone
- Type-C Earphones
- Storage Bag
- Certificate of Compliance
Notes
- Please disconnect the charger and turn off the device before cleaning.
- Non-professionals should not attempt to disassemble the device to avoid causing machine failure and losing warranty rights.
- Do not place the device in direct sunlight to avoid premature aging of electronic components.
- Avoid placing the device in excessively cold or hot environments, which may cause the device to malfunction.
- It is recommended to use the device within an ambient temperature range of -10°C to 40°C, relative humidity of 10% to 95%.
- Do not insert any objects into the device to avoid short circuits or damage to the circuitry. Do not spill any liquids on this product.
- Avoid collision with hard objects to prevent surface scratches, detachment, or other hardware damage.
- The product must not be exposed to overheated environments such as direct sunlight, fire, or high temperatures.
Product wattarity Card
Customer Name:……………
Contact Number:……………
Product Name:………………
Purchase Date:……………….
Address:………………………..
Remarks:………………………
FCC STATEMENT : This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept
any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occurina particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Manufacturer: Nanjing Old Liquor Trading Co., Ltd.
Address: Room 1209, Jinyang East Street No.16, Yuhua District,
Nanjing City, Jiangsu Province, 210000 CN
Email contact:laoweijiu01us@163.com
Made in China
Documents / Resources
|
ATKTTOP MicAce K95 Wireless Lavalier
Microphone
[pdf] User Manual
2BCHU-MICACEK95, 2BCHUMICACEK95, MicAce K95, MicAce K95 Wireless Lavalier
Microphone, Wireless Lavalier Microphone, Lavalier Microphone, Microphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>