ONE CONTROL OC_MS_SILVER_PARA Silver Para Bass Buffer User Guide

May 15, 2024
ONE CONTROL

ONE-CONTROL-logo

ONE CONTROL OC_MS_SILVER_PARA Silver Para Bass Buffer

ONE-CONTROL-OC_MS_SILVER_PARA-Silver-Para-Bass-Buffer-
image

Specifications

  • Input Impedance: 50k-390k
  • Output Impedance: 2k
  • Power Consumption: 3.5mA
  • Dimensions: 39mm (W) x 92mm (D) x 32mm (H) (excluding protrusions) / 42mm (W) x 92mm (D) x 47mm (H) (including protrusions)
  • Weight: 226g

The Minimal Series Silver Para Bass Buffer is a high-quality buffer designed specifically for electric bass guitars. It features the BJF Buffer Circuit, optimized for bass frequencies, and offers flexibility with two output options.

Product Usage Instructions

1. Input Impedance Adjustment

The Z knob on the Silver Para Bass Buffer adjusts the input impedance. This can be set to match the impedance of your specific bass guitar, whether passive or active, within the range of 50k to 390k.

2. Output Options

The buffer provides two output options for routing flexibility. You can split the signal and send it to different destinations, such as a bass amplifier and a direct input to a sound system.

3. Enhancing Low-End Response

Use the Z knob to fine-tune the low-end response of your bass, optimizing it for your desired sound. Experiment with the knob to achieve the best tone for your playing style.

4. Power Supply

The Silver Para Bass Buffer requires a DC9V adapter with a negative center polarity for power. Note that it does not operate on batteries.

FAQs

  • Q: What is the purpose of the Z knob on the Silver Para Bass Buffer?
    • A: The Z knob adjusts the input impedance of the buffer, allowing you to match it to your specific bass guitar’s impedance for optimal performance.
  • Q: Can I use the Silver Para Bass Buffer with active bass guitars?
    • A: Yes, the buffer is designed to work effectively with both passive and active bass guitars. Adjust the Z knob accordingly for different impedance settings.
  • Q: How should I connect the Silver Para Bass Buffer in my setup?
    • A: Connect your bass guitar to the input of the buffer and then route the outputs to your desired destinations, such as an amplifier and a sound system, for enhanced control over your sound.

“`

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ONE CONTROL User Manuals

Related Manuals